PUP30 TRUMPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

25- 30 WATT SWITCHING POWER SUPPLIES

DESCRIPTION

The PUP30 series of AC/DC switching power supplies are for 25 to 30 watts of continuous out put power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320 inlet to mate with interchangeable cord for world-wide use. All models meet CISPR 22 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements.

FEATURES

‧ 15 standard desktop models ‧ Single, dual or triple outputs ‧ Optional output connectors ‧ Optional on/off switch ‧ 100 ﹪ burn-in ‧ Wide input range 85 to 264 V AC ‧ Input surge current protection ‧ Overvoltage protection ‧ Overcurrent protection INPUT SPECIFICATIONS Input voltage ： 85 to 264 V AC Input frequency ： 47 to 63 Hz Input current ： 0.80A （ rms ） for 115V AC 0.50A （ rms ） for 230V AC Leakage current ： 0.47mA max. @ 115V AC, 60Hz 0.85mA max. @ 230V AC, 50Hz PUP30 SERIES Safety Standard Approvals ： OUTPUT SPECIFICATIONS Output voltage/current ： See rating chart Output power range ： 30 watts maximum Ripple and noise ： 1﹪peak to peak maximum Overvoltage protection ： Provided on output #1 only; set at 112 - 132 ﹪ of its nominal output voltage Overcurrent protection ： All outputs protected to short circuit conditions Temperature coefficient ： All outputs ±0.04 ﹪ / ℃ maximum Transient response ： Maximum excursion of 4 ﹪ or better on all models, recovering to 1 ﹪ of final value within 500us after a 25 ﹪ step load change ENVIRONMENTAL SPECIFICATIONS Operating temperature ： 0 ℃ to +70 ℃ Storage temperature ： -40 ℃ to +85 ℃ Relative humidity ： 5 ﹪ to 95 ﹪ non-condensing Derating： Derate from 100% at +50℃ linearly to 50﹪at +70℃ GENERAL SPECIFICATIONS Switching frequency ： 30KHz ±5KHz Efficiency ： 70 ﹪ minimum on single output models with V o ≥ 12V , 65% minimum on the others Hold-up time ： 10 msec minimum at 110VAC Line regulation ： ±0.5 ﹪maximum at full load Inrush current ： 15 amps @ 115V AC, or 30 amps @ 230V AC, at 25 ℃ cold start Withstand voltage ： 3000V AC from input to output 1500V AC from input to ground 500V AC from output to ground MTBF ： 400,000 hours minimum at full load at 25 ℃ambient , calculated per MIL-HDBK-217F EMC performance (EN55024) EN55022: Class B conducted, class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ± 8KV air and ± 4KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ± 1KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 1A/m EN61000-4-11: V oltage dips, 30 ﹪ reduction for 500ms and >95 ﹪reduction for 10ms (LVD+EMC) TÜV EN60950-1 UL 60950-1 CSA C22.2 No. 60950-1 Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Sant a Clara, California 95054, USA Phone: 408-988-6616 ● sales@trumpower.com ● www.TRUMPower.com

UNIVERSAL INPUT PUP30 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Maximum (1)(2) Output #1 Output #2 Output #3 Output PUP30-10 5-6V 0A 5.0A 5% (N/A) (N/A) 25W PUP30-10-1 6-8V 0A 4.5A 2% (N/A) (N/A) 27W PUP30-11 9-11V 0A 3.3A 2% (N/A) (N/A) 30W PUP30-12 11-13V 0A 2.7A 2% (N/A) (N/A) 30W PUP30-13 13-17V 0A 2.3A 2% (N/A) (N/A) 30W PUP30-13-1 17-21V 0A 1.7A 2% (N/A) (N/A) 30W PUP30-14 21-27V 0A 1.4A 2% (N/A) (N/A) 30W PUP30-16 27-33V 0A 1.1A 2% (N/A) (N/A) 30W PUP30-17 33-39V 0A 0.9A 2% (N/A) (N/A) 30W PUP30-18 48V 0A 0.7A 2% (N/A) (N/A) 30W PUP30-23 +5V 0.3A 3.0A 5% +12V 0.1A 2.0A 5% (N/A) 30W PUP30-24 +5V 0.3A 3.0A 5% +15V 0.1A 1.5A 5% (N/A) 30W PUP30-25 +5V 0.3A 3.0A 5% +24V 0.1A 1.0A 5% (N/A) 30W PUP30-31 +5V 0.3A 3.0A 5% +12V 0A 0.8A 5% -12V 0A 0.8A 5% 30W PUP30-32 +5V 0.3A 3.0A 5% +15V 0A 0.8A 5% -15V 0A 0.8A 5% 30W Notes: (1) The output voltage of a single output model, except PUP 30-18, can be adjusted by user in the stated range, or set by factory to a wanted value in the range at the request of a user when ordering. (2) Output #2 and #3 are with low drop voltage regulators. The output #1 of the multiple output models need a minimum current of 0.3A to support the other outputs at their maximum rated loads to be within voltage tolerance. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 550 grams approx. 4. See pages 6-1 to 6-8 for optional output connectors. Add the suffix assigned for a selected connector to a wanted model number, e.g. PUP30-10-B1, for ordering. PIN CHART PIN MODEL 1 2 3 4 5 PUP30-10 PUP30-10-1 PUP30-11 PUP30-12 PUP30-13 PUP30-13-1 PUP30-14 PUP30-16 PUP30-17 PUP30-18 RETURN RETURN OUTPUT #1 RETURN OUTPUT PUP30-23 PUP30-24 PUP30-25 COMMON RETURN COMMON RETURN OUTPUT COMMON RETURN OUTPUT PUP30-31 PUP30-32 COMMON RETURN COMMON RETURN OUTPUT OUTPUT OUTPUT 5-PIN DIN PLUG Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● sales@trumpower.com ● www.TRUMPower.com