PUP60 TRUMPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

60-130 WATT DESKTOP POWER ADAPTERS

DESCRIPTION

The PUP60/80/130 series of AC /DC switching power supplies are for 60 to 130 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320 inlet to mate with interchangeable cord for world-wide use. An on/off switch can be added at request. All models meet CISPR 22 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements.

FEATURES

‧ Optional output connectors ‧ Optional on/off switch ‧ 100 ﹪ burn-in at full rated load ‧ Auto-ranging input ‧ Input surge current protection ‧ Overvoltage protection ‧ Overcurrent protection ‧ Thermal protection INPUT SPECIFICATIONS Input voltage ： 90 to 130 V AC or 180 to 260 V AC (auto-ranging) Input frequency ： 47 to 63 Hz Input current ： PUP60/80 Series: 1.8A （ rms ） for 115V AC 1.0A （ rms ） for 230V AC PUP130 Series: 3.0mA (rms) for 115V AC 1.7A （ rms ） for 230V AC Leakage current ： 0.40mA max. @ 115V AC, 60Hz 0.80mA max. @ 230V AC, 50Hz OUTPUT SPECIFICATIONS Output voltage/current ： See rating chart Output power range ： See rating chart Ripple and noise ： 1﹪peak to peak maximum Overvoltage protection ： Provided on output; set at 112 - 132 ﹪of its nominal output voltage Overcurrent protection ： All outputs protected to short circuit conditions Temperature coefficient ： All outputs ±0.04 ﹪/℃ maximum Transient response ： Maximum excursion of 4 ﹪or better on all models, recovering to 1 ﹪of final value within 500us after a 25 ﹪step load change ENVIRONMENTAL SPECIFICATIONS Operating temperature ： 0℃ to +40 ℃ (PUP60/80 series) 0℃ to +50 ℃ (PUP130 series) Storage temperature ： -40 ℃ to +85 ℃ Relative humidity ： 5 ﹪ to 95 ﹪ non-condensing PUP60/80/130 SERIES Safety Standard Approvals ： Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Sant a Clara, California 95054, USA Phone: 408-988-6616 ● sales@trumpower.com ● www.TRUMPower.com (LVD+EMC) TÜV EN60950-1 GENERAL SPECIFICATIONS Switching frequency ： 60KHz to 75KHz Efficiency ： 70 ﹪ minimum on V o ≧ 12V , 65% minimum on the others Hold-up time ： PUP60/80 SERIES: PUP130 SERIES: 15 msec minimum at 110VAC 10 msec minimum at 110VAC Line regulation ： ±0.5 ﹪maximum at full load Inrush current ： 15 amps @ 115V AC, or 30 amps @ 230V AC, at 25 ℃ cold start Withstand voltage ： 3000V AC from input to output 1500V AC from input to ground 500V AC from output to ground MTBF ： PUP60/PUP80 300,000 hours minimum, PUP130 400,000 hours minimum at full load at 25 ℃ ambient, calculated per MIL-HDBK-217F, excluding DC fan. EMC performance (EN55024) EN55022: Class B conducted, class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ± 8KV air and ± 4KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ± 1KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 1A/m EN61000-4-11: V oltage dips, 30 ﹪ reduction for 500ms and >95 ﹪reduction for 10ms UL 60950-1 CSA C22.2 No. 60950-1

AUTORANGING INPUT PUP60/PUP80/PUP130 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Output Output Model Vnom. Imin. Imax. Tol. Power PUP60-10 5V 0A 12A 5% 60W PUP60-10-1 7V 0A 8.6A 5% 60W PUP60-11 10V 0A 6A 5% 60W PUP80-12 12V 0A 6.7A 4% 80W PUP80-13 15V 0A 5.3A 3% 80W PUP80-13-1 18V 0A 4.5A 3% 80W PUP80-14 24V 0A 3.4A 3% 80W PUP80-16 30V 0A 2.7A 2% 80W PUP80-17 36V 0A 2.3A 2% 80W PUP80-18 48V 0A 1.7A 2% 80W PUP130-12 12V 0A 10.8A 5% 130W PUP130-13 15V 0A 8.6A 4% 130W PUP130-13-1 18V 0A 7.2A 4% 130W PUP130-14 24V 0A 5.4A 3% 130W PUP130-16 30V 0A 4.3A 3% 130W PUP130-17 36V 0A 3.6A 2% 130W PUP130-18 48V 0A 2.7A 2% 130W Notes: (1) PUP60 and PUP80 series are without, while PUP130 series are with, built-in fan. (2) PUP60 series are with remote sense. The other series can also be equipped with remote sense. Please consult factory. MECHANICAL SPECIFICATIONS PIN CHART PIN MODEL 1 2 3 4 5 6 7 8 PUP60-10 PUP60-10-1 PUP60-11 RETURN -SENSE OUTPUT +V RETURN OUTPUT +V RETURN OUTPUT +V +SENSE PUP80-12 PUP80-13 PUP80-13-1 PUP80-14 PUP80-16 PUP80-17 PUP80-18 PUP130-12 PUP130-13 PUP130-13-1 PUP130-14 PUP130-16 PUP130-17 PUP130-18 RETURN RETURN OUTPUT +V RETURN OUTPUT +V RETURN OUTPUT OUTPUT Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Sant a Clara, California 95054, USA Phone: 408-988-6616 ● sales@trumpower.com ● www.TRUMPower.com NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 4. See pages 6-19 to 6-26 for optional output connectors. Add the suffix assigned for a selected connector to a wanted model number, e.g. PUP130-14-HA, for ordering. 5. To order a model with on/off switch, add suffix “S” to the model number, e.g. PUP130-14-HA-S.