PU150-23B | DigiCamel IC Datasheet

Online Datasheet

Read PU150-23B online.

PU150 TRUMPOWER | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 3

Technical content

TRUMPower 150 WATT SWITCHING POWER SUPPLIES NE DESCRIPTION Puiso SERIES = C€ yyy + enc) The PU150 series comprises single and multiple output . models for 150 watts of continuous output > power. Auto ranging input allows them to Sa’ operate from any line voltage throughout the > > world without a selector strap. All auxiliary ™ . & outputs are with magnetic amplifier to keep \\ > fe. a Ripe 7 regulation. The units are constructed on a Sb Se t printed circuit board with a U-bracket for = “~@ y mechanical support and heat sinking, in 1U Rie 5: (aan height. Y, i

FEATURES

Safety Standard Approvals: + Auto-ranging input UL 1950 * Short-circuit protection with auto-recovery C22.2 No. 950 * Power Fail Detect (PFD) signal on models GBe File No. LR93632 with 5V output * 100% burn-in at full rated load A EN 60950 A Certificate No. R9954992 TUV INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input voltage: 85 to 132 VAC, or 170 to

264 VAC (auto-ranging) Operating temperature: 0'C to +70°C

Input frequency: 47 to 63 Hz Storage temperatur 40T gsc fe + Input current: 3.4A (rms) for 115VAC ge temperature: OC to 2.0A (rms) for 230VAC Relative humidity: 5% to 95% non-condensing Leakage current: 0.4mA max. @11SVAC, 60Hz Derating: Derate from 100% at +50 C 0.8mA max. @230VAC, 50Hz linearly to 50% at +70 © GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS . Switching frequency: 120KHz +/-15% Output voltage/current : See rating chart Efficiency : 70% typical on all models Total output power: 150 watts maximum at 30 CFM Hold-up time : 15 msec minimum at 115VAC forced air cooling or 110 . . watts maximum at convection Line regulation : +/-0.5% maximum at full load cooling. Inrush current : 20 amps @ 115VAC, or 40 amps @ 230VAC, at 25 C cold start Ripple and noise : 1% peak to peak maximum Withstand voltage: 3000VAC from input to output Overvoltage protection : Provided on output #1 only; 1500VAC from input to ground set at 112 - 136% of its 500VAC from output to ground nominal output voltage MTBF : 300,000 hours minimum at full Overcurrent protection: Al! outputs protected to load at 25°C ambient, calculated short circuit conditions per MIL-HDBK-217F Temperature coefficient: All outputs +/-0.04%/ ‘C EMI requirements: [n compliance with maximum (a) FCC Level B Transient response : Maximum excursion of 4% (b) EN 55022 Class B or better on all models; : recovering to 1% of final Safety requirements : Meets or exceeds value within 500us after a (a) UL 1950 25% step load change (b) CSA €22.2 No. 950 (c) IEC 950 (EN 60950) —_—— eee Tumbler Technologies/TRUMPower « Palo Alto, CA + 650-494-3322 + info@trumpower.com + www. TRUMPower.com

AUTORANGING INPUT PU150 SERIES SST EERIE nS oe nD OUTPUT VOLTAGE/CURRENT RATING CHART (1)(2) Output #1 (3) Output #2 Output #3 Output #4 Maximum PU150-10B SV 0A 30A 35A 2% (N/A) (N/A) (N/A) 150W PU150-12B 12V__0A 12.5A 14.5A_2% (N/A) (N/A) (N/A) 150W PU1IS0-13B —15V0A_—(10A 11.64 2% (N/A) (N/A) (N/A) 150W PU150-13-1B_18V__0A_8.3A_9.7A_ 2% (N/A) NA) NA) OW PU150-14B — 24V 0A 63A 7.3A 2% (N/A) (N/A) (N/A) 150W PU1I50-16B _30V__0A_5.0A_6.0A 2% N/A} N/A NIA 150W. PU150-17B —36V. 0A 4.2A 4.8 2% (N/A) (N/A) (N/A) 1s0W PU150-18B 48V__0A_3.1A_3.6A_2% (N/A) (N/A) (N/A) 150W PU150-23B *5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% (N/A) (N/A) 150W PU1I50-25B — +5V 2.0A 22A 30A 2% +24V 0A 45A SA 3% (N/A) (N/A) 1s0W PU1S0-30B __+5V_2.0A__22A_30A_2% +12V_0A__8A_10A 3% -SV__0A_2.5A_ 3% N/A 1s0W PUISO-31B | +SV 2.0A 22A 30A 2% +12V 0A 8A 10A 3% -12V 0A 2.5A 3% (N/A) 150W PU150-32B__+5V_2.0A 224 30A 2% +I5V_ 0A 6.44 8A 3% -ISV_ 0A 2A 3% (N/A) 150W. PU150-33B —+5V 2.0A 22A 30A 2% +15V 0A 6.44 8A 3% -I2V OA 25A 3% (N/A) 150W PUI50-40B _+SV_2.0A 224 30A_2% +12V 0A 8A _10A 3% -I2V__0A_2.5A 3% SV 0A__SA__SA_3% _150W PUI50-41B | *5V 2.0A 22A 30A 2% +15V 0A 64A 8A 3% -1SV. 0A 2A 3% 24V OA 4S5A 3A 3% 15QW PUI5S0-44B — +5V 2.0A 22A 30A 2% +12V OA 8A 10A 3% -I5V 0A 2A 3% I5V. 0A 4A 4,5A 3% 150W PUI50-45B —+5V 2.0A 22A 30A 2% +12V 0A 8A 10A 3% -12V 0A 25A 3% 24V OA 45A SA 3% 150W Notes: (1) Output #1 can be built for one-wire current sharing. Add suffix "Z" , e.g. PUIS0-45B-Z for this requirement. (2) The maximum current of each output shall be derated to 75% if no forced air is provided by user. (3) The output #1 of all multiple output models needs a minimum load of 2A to support the other outputs at their maximum rated loads. MECHANICAL SPECIFICATIONS Single Output models in > Sit 1. Dimensions shown in inch [mm] Keil 2. Tolerance 0.02 [0.5] maximum yo x 3. Input connector PI mates with Molex 2.50163 51 eek retest deter? olf] housing 09-50-3051 and Molex 2878 - ® old series crimp terminal. ow i22 29 i @ housing 09-50-3031 and Molex 2878 oa series crimp terminal. ossuser +40 tine} 5. Connector P4 mates with Molex housing 51110-0851 and pins 50394-8100. 1501380) ° @ e |° 6. Weight: os on — ° 0.84 Kgs (1.86 Lbs.) approx. ——, 50 1216.0) Multiple Output models ee NOTES: 4.25 (108.0) le Pt 1. Dimensions shown in inch [mm] ® || yea 2. Tolerance 0.02 [0.5] maximum i ia 3. Input connector Pt mates with Molex 250 163.5) Iheearnon#e2 ORM pa housing 09-50-3051 and Molex 2878 | va e ve | series crimp terminal. Ty ____|___} 4. Output connector P3 mates with Molex ose (22 asifel i mir) housing 09-50-3091 and Molex 2878 SS series crimp terminal. 4 ss ite et 7.40 [188 0) 5. Connector P4 mates with Molex housing vipee Te nnn ey @ |e 51110-0851 and pins 50394-8100. 0) © 00nd ©. 6. Weight: ott 0.84 Kgs (1.86 Lbs.) approx. 50 216.0) ———

Product Information

PU150-23B specifications and overview.

Summary

150 WATT SWITCHING POWER SUPPLIES

Description

150 WATT SWITCHING POWER SUPPLIES

Source title PU150-23B Datasheet(PDF) - Tumbler Technologies + TRUMPower

Related Parts

More parts from the same family.

Browse manufacturer