PTVA082407NF

PTVA082407NF WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 9

Technical content

Features

• Broadband internal input matching
• Typical CW performance, 755 MHz, 48 V - Output power at P1dB = 225 W - Output power at P3dB = 250 W - Gain = 20.5 dB - Efficiency = 43%
• Capable of handling 10:1 VSWR @ 48 V, 80 W CW output power
• Integrated ESD protection
• Human Body Model class 2 (per ANSI/ESDA/ JEDEC JS-001)
• Low thermal resistance
• Pb-free and RoHS compliant Thermally-Enhanced High Power RF LDMOS FET

240 W, 48 V, 746 – 821 MHz

Description

The PTVA082407NF is a 240-watt LDMOS FET manufactured with Wolfspeed’s 48-V LDMOS process. It is designed for use in multi-standard cellular power amplifier applications. It features a single ended design and input matching that allow for use from 746 MHz to 821 MHz. Manufactured with Wolfspeed’s advanced LDMOS process, this device provides excellent thermal performance and superior reliability. RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed production test fixture) VDD = 48 V, IDQ = 900 mA, POUT = 80 W avg, ƒ = 755 MHz, 3GPP signal, channel bandwidth = 3.84 MHz, peak/average = 10 dB @ 0.01% CCDF Characteristic Symbol Min. Typ. Max. Unit Linear Gain Gps 21 22.5 — dB Drain Efficiency hD 33 35.5 — % Adjacent Channel Power Ratio ACPR — –31.5 –29.5 dBc Note: All published data at TCASE = 25°C unless otherwise indicated ESD: Electrostatic discharge sensitive device—observe handling precautions! -60 -40 -20 25 30 35 40 45 50 55 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 48 V, IDQ = 900 mA, ƒ = 755 MHz, 3GPP WCDMA signal, PAR = 10 dB,

3.84 MHz BW

PAR @ 0.01% CCDF ptva082407nf_g1

Rev. 04.1, 2022-02-13 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 DC Characteristics Maximum Ratings Parameter Symbol Value Unit Drain-source Voltage VDSS 105 VGate-source Voltage VGS –6 to +12 Operating Voltage VDD 0 to +55 Junction Temperature TJ 225 Storage Temperature Range TSTG –65 to +150 Parameter Symbol Value Unit Conditions Thermal Resistance RqJC 0.32 °C/W TCASE = 70°C, 240 W CW Characteristic Symbol Min. Typ. Max. Unit Conditions Drain-Source Breakdown Voltage VBR(DSS) 105 — — V VGS = 0 V, IDS = 10 mA Drain Leakage Current IDSS — — 1 µA VDS = 50 V, VGS = 0 V — — 10 VDS = 105 V, VGS = 0 V Gate Leakage Current IGSS — — 1 VGS = 10 V, VDS = 0 V On-State Resistance RDS(on) — 0.16 — W VGS = 10 V, VDS = 0.1 V Operating Gate Voltage VGS 3.3 3.7 4 V VDS = 48 V, IDQ = 0.9 A Thermal Characteristics 1. Operation above the maximum values listed here may cause permanent damage. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. For reliable continuous operation, the device should be operated within the operating voltage range (VDD) specified above. 2. Parameters values can be affected by end application and product usage. Values may change over time.

Ordering Information

Moisture Sensitivity Level Type and Version Order Code Package Description Shipping PTVA082407NF V2 R5 PTVA082407NF-V2-R5 PG-HBSOF-4-2 Tape & Reel, 500 pcs Level Test Signal Package Temperature Unit

3 IPC/JEDEC J-STD-020 260 °C

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 5. CW Performance at various VDD Figure 6. CW Performance Small Signal

Rev. 04.1, 2022-02-13 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 C104 C101 C103 R101 C102 C202 C206 C205 C201 C204 C203 C207 C208 C209 C210 PTVA082407NF_IN_02 RF_IN RF_OUT p t v a 082407 n f _ C D _ 0 5 - 2 7 - 202 0 RO4350, 20 MIL (272) PTVA082407NF_OUT_02A VDD VDD RO4350, 20 MIL (272) VGS C104 C101 C103 R101 C102 C202 C206 C205 C201 C204 C203 C207 C208 C209 C210 PTVA082407NF_IN_02 RF_IN RF_OUT p t v a 082407 n f _ C D _ 0 5 - 2 7 - 202 0 RO4350, 20 MIL (272) PTVA082407NF_OUT_02A VDD VDD RO4350, 20 MIL (272) VGS Reference circuit assembly diagram (not to scale) Evaluation Board, 746 – 821 MHz Evaluation Board Part Number L TN/PTVA082407NF-V2 PCB Information Rogers 4350, 0.508 mm [0.020”] thick, 2 oz. copper, εr = 3.66, ƒ = 746 – 821 MHz Find Gerber files for this test fixture on the Wolfpseed Web site at www.wolfspeed.com/RF

Rev. 04.1, 2022-02-13 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Components Information Component Description Manufacturer P/N Input C101, C103 Capacitor, 56 pF ATC ATC100B560KW500XT C102 Capacitor, 10 pF ATC ATC100B100KW500XT C104 Capacitor, 100 µF, 50 V United Chemi-Con EMVA500ADA101MHA0G R101 Resistor, 10 ohms Panasonic Electronic Components ERJ-8GEY J100V Output C201, C202 Capacitor, 100 µF, 100 V TDK Corporation C5750X7S2A106M230KB C203, C204, C206 Capacitor, 56 pF ATC ATC100B560KW500XT C205 Capacitor, 6.8 pF ATC ATC100B6R8CW500XB C207, C208, C209, C210 Capacitor, 100 µF, 63 V Panasonic Electronic Components EEE-FK1J101P G D Pin Description D Drain G Gate S Source (flange) V Drain video decoupling (use only for decoupling), not for DC bias Pinout Diagram (top view) V V S

Rev. 04.1, 2022-02-13 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Diagram Notes–unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar/metal protrusion. 7. Exposed metal surface tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D – drain; G – gate; S – source; V – drain video decoupling (use only for decoupling), not for DC bias TOP VIEW 10° PG-HBSOF-4-1_part1_03_07-13-2016 0.25 3.51 R0.5 22.7 ± 0.15 0.5 16.75 9.75 9.75 3.3 1 0.63 1.52 2 X 1.19 25.4 0.63 16.75 2 X 1.61 1.52 1.57 ± 0.15 1.17 Y 0.1 MAX. 16.76 10° G DV V 25.4 Diagram Notes–unless otherwise specified: 1. Mold/dam bar/metal protusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar/metal protusion. 7. Exposed metal surface pre-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces pre-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Gold plating thickness: 0.25 micron max. 12. Pins: D – drain; G – gate; S – source; V – VDD. PG-HBSOF-4-2_part1_01_11-23-2016 Diagram Notes – unless otherwise specified: 1. Modem/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Dose not include mold/dam bar/metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All toleranceds ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D = drain; G = gate; S – source; V = drain video decoupling (use only for decoupling), not for DC bias. SIDE VIEW X 45° Package Outline Specifications – Package PG-HBSOF-4-2

Rev. 04.1, 2022-02-13 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 BOTTOM VIEW VIEW Y 23.26 24.4 0.05 0.50.5 21.3 5.4 3.02 R0.4 2.7 0.75 G D V V S Diagram Notes – unless otherwise specified: 1. Modem/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Dose not include mold/dam bar/metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All toleranceds ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D = drain; G = gate; S = source; V = drain video decoupling (use only for decoupling), not for DC bias. PG-HBSOF-4-2_part2_01_11-23-2016 Diagram Notes–unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar/metal protrusion. 7. Exposed metal surface tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D – drain; G – gate; S – source; V – drain video decoupling (use only for decoupling), not for DC bias Package Outline Specifications – Package PG-HBSOF-4-2

Rev. 04.1, 2022-02-13 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. For more information, please contact:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com Notes & Disclaimer Specifications are subject to change without notice. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for information purposes only. Wolfspeed products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed.