PTRA097008NB WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Features

  • Broadband internal input and output matching
  • Asymmetric design - Main: P1dB = 300 W typical - Peak: P1dB = 400 W typical
  • Typical pulsed CW performance (10 µs, 10% duty cycle, class AB test), 942 MHz, 48 V, combined outputs, Doherty configuration - Output power at P1dB = 180 W - Output power at P3dB = 600 W - Efficiency = 52% - Gain = 19 dB
  • Capable of handing 10:1 VSWR at 48 V, 89 W (CW)output power
  • Integrated ESD protection
  • Human Body Model Class 2 (per ANSI/ESDA/JEDEC JS-001)
  • Low thermal resistance
  • Pb-free and RoHS-compliant -60 -40 -20 25 30 35 40 45 50 55 Efficiency (%) Peak/Average Ratio (dB), Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 50 V, IDQ(MAIN) = 600 mA, VGS(PEAK) =2 . 4V ,ƒ=9 6 0M H z , 3GPP WCDMA signal, 10 dB PAR,

3.84 MHz bandwidth

PAR @ 0.01% CCDF ra097008nb-gr1a PTRA097008NB

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 DC Characteristics (each side) Characteristic Conditions Symbol Min Typ Max Unit Drain-Source Breakdown Voltage VGS = 0 V, IDS = 10 mA V(BR)DSS 105 — — V Drain Leakage Current VDS = 50 V, VGS = 0 V IDSS — — 1 µA V DS = 105 V, VGS = 0 V IDSS — — 10 µA On-State Resistance (Main) VGS = 10 V, VDS = 0.1 V RDS(on) — 0.07 — W (Peak) V GS = 10 V, VDS = 0.1 V RDS(on) — 0.05 — W Operating Gate Voltage (Main) VDS = 48 V, IDQ = 600 mA VGS 3 3.65 4 V (Peak) V DS = 48 V, IDQ = 0 mA VGS — 2.4 — V Gate Leakage Current VGS = 14 V, VDS = 0 V IGSS — — 1 µA Maximum Ratings Parameter Symbol Value Unit Drain-Source Voltage VDSS 105 V Gate-Source Voltage VGS –6 to +12 V Operating Voltage VDD 0 to +55 V Junction Temperature TJ 225 °C Storage Temperature Range TSTG –65 to +150 °C 1. Operation above the maximum values listed here may cause permanent damage. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component. Exposure to absolute maximum rating conditions for extended periods may affect device reli- ability. For reliable continuous operation, the device should be operated within the operating voltage range (VDD) specified above. 2. Parameters values can be affected by end application and product usage. Values may change over time. Thermal Characteristics Parameter Symbol Value Unit Thermal Resistance Main (TCASE = 70°C, Pavg = 90 W CW) R qJC 0.45 °C/W Moisture Sensitivity Level Level Test Signal Package Temperature Unit

3 IPC/JEDEC J-STD-020 260 °C

Ordering Information

Type and Version Order Code Package Description Shipping PTRA097008NB V1 R2 PTRA097008NB-V1-R2 PG-HB2SOF-6-1 Tape & Reel, 250 pcs

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 -70 -60 -50 -40 -30 -20 -10 25 30 35 40 45 50 55 Efficiency (%) ACP Up, ACP Low (dBc) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 50 V, IDQ(MAIN) = 600 mA, VGS(PEAK) = 2.4 V, ƒ = 960 MHz, 3GPP WCDMA signal, 10 dB PAR,

960 MHz ACPU

960 MHz ACPL

960 MHz Eff

Typical Performance (data taken in a production test fixture) 875 925 975 1025 Efficiency (%) Gain (dB) Frequency (MHz) Single-carrier WCDMA Broadband VDD = 50 V, IDQ(MAIN) = 600 mA, VGS(PEAK) = 2.4 V, POUT = 49.5 dBm, 3GPP WCDMA signal, 10 dB PAR, -30 -25 -20 -15 -10 -35 -30 -25 -20 -15 875 925 975 1025 Return Loss (dB) ACP Low, ACP Up (dBc) Frequency (MHz) Single-carrier WCDMA Broadband VDD = 50 V, IDQ(MAIN) = 600 mA, VGS(PEAK) = 2.4 V, POUT = 49.5 dBm, 3GPP WCDMA signal, 10 dB PAR, Efficiency (%) Gain (dB) Output Power (dBm) CW Performance VDD = 50 V, IDQ(MAIN) = 600 mA, VGS(PEAK) = 2.4 V, ƒ = 925 MHz, 942 MHz, 960 MHz

960 MHz Gain

942 MHz Gain

925 MHz Gain

942 MHz Eff

925 MHz Eff

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 29 33 37 41 45 49 53 57 Efficiency (%) Gain (dB) Output Power (dBm) CW Performance at various VDD IDQ(MAIN) = 600 mA, VGS(PEAK) = 2.4 V, ƒ = 960 MHz

46 V, Gain

50 V, Gain

54 V, Gain

46 V, Eff

50 V, Eff

54 V, Eff

-18 -16 -14 -12 -10 875 925 975 1025 Input Return Loss (dB) Gain (dB) Frequency (MHz) CW Performance Small Signal VDD = 50 V, IDQ(MAIN) = 600 mA, VGSPEAK = 2.4 V Input Retrun Loss Gain ra097008nb-gr7 Typical Performance (cont.)

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Load Pull Performance Main Side Load Pull Performance – Pulsed CW signal – 100 µsec, 10% duty cycle, 48 V, IDQ = 600 mA, class AB P1dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] P3dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Peak Side Load Pull Performance – Pulsed CW signal – 100 µsec, 10% duty cycle, 48 V, VGSPK = 3.58 V, class AB P1dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] P3dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%]

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Reference Circuit tuned for 920 to 960 MHz DUT PTRA097008NB-V1 Reference Circuit Part No. L TA/PTRA097008NB-V1 PCB Rogers 3006, 0.064 mm [.025"] thick, 2 oz. copper, εr = 6.50 Find Gerber files for this reference circuit on the Wolfspeed Web site at www.wolfspeed.com/RF Reference circuit assembly diagram (not to scale) RF_IN VGG VGG RF_IN VDD VDD RF_OUT PTRA097008NB p tra 09 70 08 nb _ CD _ 02 _ 20 18 - 05 - 01 width of device 0.392 x 1.6666 = 0.65 PTRA097008NB_IN_02 RO3006, 25 MIL PTRA097008NB_OUT_02 PEAK MAIN RO3006, 25 MIL C215C213 C214C212 C211 C218C233 C216 C217 C232 C227 C224 C226 C229 C230 C231 C228 C202 C201 C222 C223 C225 C221 C204 C206 C220 C219 C207C205 C208 C209 C210 C203 R104 R103 C106 C101C105 C102 R101 C103 C104 C107 C112 C111 C110 R102 RF_IN RF_OUT VGG VDD VDD VGG C109 C108

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Reference Circuit (cont.) Components Information Component Description Manufacturer P/N Input C101, C103, C107 Capacitor, 4.7 pF ATC ATC600F4R7CT250X C102, C108 Capacitor, 36 pF ATC ATC600F360JT250X C104, C109 Capacitor, 3.0 pF ATC ATC600F3R0CT250X C105, C111 Capacitor, 39 pF ATC ATC600F390JT250X C106, C112 Capacitor, 10 µF, 50 V Taiyo Yuden UMK325C7106MM-T C110 Capacitor, 2.4 pF ATC ATC600F2R4CT250X R101, R102, R103 Chip resistor, 5.1 ohms Panasonic ERJ-8GEY J5R1V R104 Resistor, 50 ohms Richardson C16A50Z4 U1 Hybrid coupler Anaren X3C09P1-03S Output C201, C202, C203, C204, C205, C206, C207, C208, C209, C210, C211, C212, C213, C214, C215, C216, C217, C218 Capacitor, 10 µF, 100 V TDK Corporation C5750X7S2A106M230KB C219, C228, C233 Capacitor, 39 pF ATC ATC600F390JT250X C220, C224, C225 Capacitor, 3.3 pF ATC ATC600F3R3CT250X C221 Capacitor, 0.3 pF ATC ATC600F0R3CT250X C222 Capacitor, 1.2 pF ATC ATC600F1R2CT250X C223 Capacitor, 12 pF ATC ATC600F120JT250X C226 Capacitor, 5.1 pF ATC ATC600F5R1CT250X C227 Capacitor, 8.2 pf ATC ATC600F8R2CT250X C229 Capacitor, 1.0 pF ATC ATC600F1R0CT250X C230, C231 Capacitor, 2.0 pF ATC ATC600F2R0CT250X C232 Capacitor, 7.5 pF ATC ATC600F7R5CT250X Pinout Diagram (top view) Pin Description D1 Drain Device 1 (main) D2 Drain Device 2 (peak) G1 Gate Device 1 (main) G2 Gate Device 2 (peak) Source Bottom metallization V1, V2 Drain video decoupling, no DC bias Main Peak V1 V2

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications 32.26 2x 14.12 2x 10.62x 1.02 2.83 7.064x 11.29 2x 4.44 1.57 9.96 9.96 19.46 3.30 0.25 3.81 32.26 5 2x 4.75 2x 1.00 2.03 7.19 2x 0.63x 45° 10° 2x 0.50 0.05 8.46 4.23 31.26 3.51 D1 D2 G1 G2 D2 D1 G2 G1 V V V V PG-HB2SOF-6-1_prelim_02-09-2017 PG-HB2SOF-6-1_prelim_02-09-2017 Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Fillets and radii: all radii are 0.3 mm max. 3. Interpret dimensions and tolerances per ISO 8015. 4. Dimensions are mm. 5. Does not include mold/dam bar and metal protrusion. 6. All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces tin pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Pins: D1, D2 – drain; G1, G2 – gate; S – source; V – drain video decoupling, no DC bias Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included 2. Fillets and radii: all radii are 0.30t mm max 3. Interpret dimensions and tolerances per ISO 8015 4. Dimensions are mm 5. Does not include mold/dam bar and metal protrusion 6. All tolerances ± 0.1 mm 7. All metal surfaces tin pre-plated, except area of cut 8. Lead thickness: 0.25 mm 9. Pins: D1, D2 – drain; G1, G2 – gate; Source – bottom metallization; V – drain video decoupling, no DC bias

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included 2. Fillets and radii: all radii are 0.30t mm max 3. Interpret dimensions and tolerances per ISO 8015 4. Dimensions are mm 5. Does not include mold/dam bar and metal protrusion 6. All tolerances ± 0.1 mm 7. All metal surfaces tin pre-plated, except area of cut 8. Lead thickness: 0.25 mm 9. Pins: D1, D2 – drain; G1, G2 – gate; Source – bottom metallization; V – drain video decoupling, no DC bias Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Fillets and radii: all radii are 0.3 mm max. 3. Interpret dimensions and tolerances per ISO 8015. 4. Dimensions are mm. 5. Does not include mold/dam bar and metal protrusion. 6. All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces tin pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Pins: D1, D2 – drain; G1, G2 – gate; S – source; V – drain video decoupling, no DC bias 32.26 2x 14.12 2x 10.62x 1.02 2.83 7.064x 11.29 2x 4.44 1.57 9.96 9.96 19.46 3.30 0.25 3.81 32.26 5 2x 4.75 2x 1.00 2.03 7.19 2x 0.63x 45° 10° 2x 0.50 0.05 8.46 4.23 31.26 3.51 D1 D2 G1 G2 D2 D1 G2 G1 V V V V PG-HB2SOF-6-1_prelim_02-09-2017 PG-HB2SOF-6-1_prelim_02-09-2017

Rev. 04, 2023-06-22 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 © 2023 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. For more information, please contact:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com Notes & Disclaimer Specifications are subject to change without notice. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for information purposes only. Wolfspeed products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed.