PTRA094808NF

PTRA094808NF WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

Features

• Broadband internal input and output matching
• Asymmetrical design - Main: P1dB = 210 W Typ - Peak: P1dB = 340 W Typ
• Typical Pulsed CW performance, 896 MHz, 48 V, Doherty configuration - Output power at P1dB = 300 W - Output power at P3dB = 420 W - Efficiency = 53% - Gain = 17.5 dB
• Capable of handling 10:1 VSWR @ 48 V, 100 W (CW) output power
• Integrated ESD protection
• Human Body Model class 1C (per ANSI/ESDA/ JEDEC JS-001)
• Low thermal resistance
• Pb-free and RoHS compliant Thermally-Enhanced High Power RF LDMOS FET

480 W, 48 V, 859 – 960 MHz

Description

The PTRA094808NF is a 480-watt LDMOS FET intended for use in multi-standard cellular power amplifier applications in the 859 to 960 MHz frequency band. Features include input and output matching, high gain and thermally-enhanced package with earless flange. Manufactured with Wolfspeed’s advanced LDMOS process, this device provides excellent thermal performance and superior reliability. RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed Doherty production test fixture) VDD = 48 V, IDQ = 450 mA, VGS(PEAK) = 2.05 V, POUT = 87 W avg, ƒ = 895 MHz, 3GPP signal, channel bandwidth = 3.84 MHz, peak/average = 10 dB @ 0.01% CCDF Characteristic Symbol Min. Typ. Max. Unit Linear Gain Gps 16.5 17.5 — dB Drain Efficiency hD 48.5 52.5 — % Adjacent Channel Power Ratio ACPR — –30.5 –26.5 dBc Output PAR @ 0.01% CCDF OPAR 7.1 7.5 — dB Note: All published data at TCASE = 25°C unless otherwise indicated ESD: Electrostatic discharge sensitive device—observe handling precautions! -60 -40 -20 25 30 35 40 45 50 55 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 48 V, IDQ(MAIN) = 450 mA, VGS(PEAK) = 2.05 V, ƒ = 895 MHz, 3GPP WCDMA signal, PAR = 10 dB,

3.84 MHz BW

PAR @ 0.01% CCDF ptra094808nf_g1

Rev. 05.2, 2022-01-04 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 DC Characteristics (each side) Maximum Ratings Parameter Symbol Value Unit Drain-source Voltage VDSS 105 VGate-source Voltage VGS –6 to +12 Operating Voltage VDD 0 to +55 Junction Temperature TJ 225 Storage Temperature Range TSTG –65 to +150 Characteristics Symbol Value Unit Conditions Thermal Resistance (Main) RqJC 0.51 °C/W TCASE = 70°C, 87.1 W CW Characteristic Symbol Min. Typ. Max. Unit Conditions Drain-Source Breakdown Voltage VBR(DSS) 105 — — V VGS = 0 V, IDS = 10 mA Drain Leakage Current IDSS — — 1 µA VDS = 48 V, VGS = 0 V — — 10 VDS = 105 V, VGS = 0 V Gate Leakage Current IGSS — — 1 VGS = 14 V, VDS = 0 V On-State Resistance (main) RDS(on) — 0.08 — W VGS = 10 V, VDS = 0.1 V On-State Resistance (peak) — 0.05 — Operating Gate Voltage (main) VGS 3 3.5 4 V VDS = 48 V, IDQ = 0.45 A Operating Gate Voltage (peak) — 2.05 — VDS = 48 V, IDQ = 0 A Thermal Characteristics 1. Operation above the maximum values listed here may cause permanent damage. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. For reliable continuous operation, the device should be operated within the operating voltage range (VDD) specified above. 2. Parameters values can be affected by end application and product usage. Values may change over time.

Ordering Information

Moisture Sensitivity Level Type and Version Order Code Package and Description Shipping PTRA094808NF V1 R5 PTRA094808NF-V1-R5 PG-HBSOF-6-2 Tape & Reel, 500 pcs Level Test Signal Package Temperature Unit

3 IPC/JEDEC J-STD-020 260 °C

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 5. CW Performance at various VDD Figure 6. CW Performance Small Signal

Rev. 05.2, 2022-01-04 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Load Pull Performance Main Side Load Pull Performance – Pulsed CW signal: 10 µsec, 10% duty cycle, VDD = 48 V, IDQ = 350 mA, class AB Peak Side Load Pull Performance – Pulsed CW signal: 10 µsec, 10% duty cycle, VDD = 48 V, VGS(PEAK) = 2 V, class C P1dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] P1dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] P3dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] P3dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%]

Rev. 05.2, 2022-01-04 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 R104 R105 C115 C102 C107 C106 C101 C111 C110 C109 C108 R102 C113 C114 R101C105 C104R103 C103 C112 C211 C212 C210 C213 C214 C215 C216 C203 C207 C209 C206 C205 C208 C202 C201 C204 C217 C218 U1 RF_OUTRF_IN RO4360, 24 MIL PTRA094808NF_OUT_04A PTRA094808NF_IN_04A RO4360,

24 MIL

(285) V GS (MAIN) V GS (PEAK) V DD V DD R104 R105 C115 C102 C107 C106 C101 C111 C110 C109 C108 R102 C113 C114 R101C105 C104R103 C103 C112 C211 C212 C210 C213 C214 C215 C216 C203 C207 C209 C206 C205 C208 C202 C201 C204 C217 C218 U1 RF_OUTRF_IN RO4360, 24 MIL PTRA094808NF_OUT_04A PTRA094808NF_IN_04A RO4360, (285) V GS (MAIN) V GS (PEAK) V DD V DD Reference circuit assembly diagram (not to scale) Evaluation Board, 869 – 894 MHz Evaluation Board Part Number L TA/PTRA094808NF-V1 PCB Information Rogers 4360, 0.609 mm [0.024”] thick, 2 oz. copper, εr = 6.15 Find Gerber files for this test fixture on the Wolfspeed Web site at www.wolfspeed.com/RF

Rev. 05.2, 2022-01-04 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Components Information Component Description Manufacturer P/N Input C101 Capacitor, 6.8 pF ATC ATC600F6R8BT250T C102 Capacitor, 2.7 pF ATC ATC600F2R7BT250T C103, C105 Capacitor, 1.8 pF ATC ATC600F1R8BT250T C104, C111 Capacitor, 33 pF ATC ATC600F330JT250T C106, C113 Capacitor, 68 pF ATC ATC600F680JT250T C107, C114, C115 Capacitor, 10 µF Taiyo Yuden UMK325C7106MM-T C108 Capacitor, 8.2 pF ATC ATC100B8R2BT500XB C109 Capacitor, 2.0 pF ATC ATC600F2R0BT250T C110 Capacitor, 1.0 pF ATC ATC600F1R0BT250T C112 Capacitor, 3.3 pF ATC ATC600F3R3BT250T R101, R102 Resistor, 5.6 Ω Panasonic Electronic Components ERJ-8RQJ5R6V R103 Resistor, 50 Ω Anaren C16A50Z4 R104, R105 Resistor, 1,000 Ω Panasonic Electronic Components ERJ-8GEY J102V U1 Hybrid coupler CEMAX CMX09Q02 Output C201, C210 Capacitor, 10 µF Taiyo Yuden UMK325C7106MM C202 Capacitor, 10 pF ATC ATC600F100JT250T C203 Capacitor, 1.5 pF ATC ATC600F1R5CT250T C204 Capacitor, 20 pF ATC ATC100B200JT500XB C205 Capacitor, 68 pF ATC ATC600F680JT250T C206, C207, C208, C209, C214, C215, C216, C217, C218 Capacitor, 10 µF, 100 V TDK Corporation C5750X7S2A106M230KB C211 Capacitor, 47 pF ATC ATC100B470JT500XB C212 Capacitor, 12 pF ATC ATC600F120JT250T C213 Capacitor, 47 pF ATC ATC600F470JT250T G1 G2 D2D1 V1 Main Peak V2 PG-HBSOF-6-1_PD_8-29-2020_bn Pin Description D1 Drain Device 1 (Main) D2 Drain Device 2 (Peak) G1 Gate Device 1 (Main) G2 Gate Device 2 (Peak) S Source (flange) V1 Drain video decoupling, no DC bias V2 NC or connected to ground Pinout Diagram (top view) S

Rev. 05.2, 2022-01-04 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications – Package PG-HBSOF-6-2 0.63ÊxÊ45 PG-HBSOF-6-2_prelim_08-30-20162ÊXÊ10 25.40 0.25 22.7ʱÊ0.15 2ÊXÊ7 0.52ÊXÊ1.00 G2 2ÊXÊ1.52 2ÊXÊ1.19 2ÊXÊ8.92 2ÊXÊ6.29 2ÊXÊ1.61 25.40 4ÊXÊ7.83 4.46 2ÊXÊ16.76 1.17 3.00 9.75 3.30Y 9.75 2ÊXÊ3.51 1.57ʱÊ0.10 5.40 VIEWÊY 2ÊXÊ0.5 21.3 23.26 24.4 0.05 3.02 2.70 0.75 7G2 G1 D2 D1 VV VV S PG-HBSOF-6-2_prelim_08-30-2016 Diagram Notes–unless otherwise specified: 1. Mold/dam bar/metal protusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar/metal protusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 – drain; G1, G2 – gate; S – source, V – VDD. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = sourec, V1, V2 = no DC bias, NC or connect to GRD V2V1 PG-HBSOF-6-2_2017-01-112 X 10°

2 X 7°

0.63 x 45° Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = source, V1, V2 = no DC bias, NC or connect to GRD V2V1 2x 7° 0.63x 45° 2x 1.00 2x 1.19 2x 8.92 2x 6.29 2x 1.61 2x 3.51 2x 16.76 2x 1.52 1.57 11. Pins: D1, D2 = drain; G1, G2 = gate; S = source; V1 = drain video decoupling, no DC Bias, V2 = NC or connected to GRD

Rev. 05.2, 2022-01-04 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications – Package PG-HBSOF-6-2 (bottom view) 2x 0.50 0.05 2.700.75 5.40 3.02 23.26 24.40 2 2 Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = source, V1, V2 = no DC bias, NC or connect to GRD V2 V1 PG-HBSOF-6-2_02.1_01-17-2017 D2 D1 G2 G1 11. Pins: D1, D2 = drain; G1, G2 = gate; S = source; V1 = drain video decoupling, no DC Bias, V2 = NC or connected to GRD

Rev. 05.2, 2022-01-04 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. For more information, please contact:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com Notes & Disclaimer Specifications are subject to change without notice. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for information purposes only. Wolfspeed products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed.