PTRA083818NF

PTRA083818NF WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

Features

• Broadband internal input matching
• Asymmetrical Doherty design - Main : P1dB = 165 W Typ - Peak : P1dB = 250 W Typ
• Typical Pulsed CW performance, 805 MHz, 48 V, combined outputs - Output power at P1dB = 275 W - Efficiency = 59.6% - Gain = 18.6 dB
• Capable of handling 10:1 VSWR @ 48 V, 81.3 W CW output power
• Integrated ESD protection
• Human Body Model class 1C (per ANSI/ESDA/ JEDEC JS-001)
• Low thermal resistance
• Pb-free and RoHS compliant Thermally-Enhanced High Power RF LDMOS FET

275 W, 48 V, 733 – 805 MHz

Description

The PTRA083818NF is a 275-watt LDMOS FET intended for use in multi-standard cellular power amplifier applications in the 733 to 805 MHz frequency band. Features include input matching, high gain and thermally-enhanced package with earless flanges. Manufactured with Wolfspeed’s advanced LDMOS process, this device provides excellent thermal performance and superior reliability. RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed Doherty production test fixture) VDD = 48 V, IDQ = 200 mA, VGS(PEAK) = 2.0 V, POUT = 81.3 W avg, ƒ = 805 MHz, 3GPP signal, channel bandwidth = 3.84 MHz, peak/average = 10 dB @ 0.01% CCDF Characteristic Symbol Min. Typ. Max. Unit Linear Gain Gps 17.2 18 — dB Drain Efficiency hD 53 56 — % Adjacent Channel Power Ratio ACPR — –27.3 –24 dBc Output PAR @ 0.01% CCDF OPAR 5.5 6.3 — dB Note: All published data at TCASE = 25°C unless otherwise indicated ESD: Electrostatic discharge sensitive device—observe handling precautions! -60 -40 -20 25 30 35 40 45 50 55 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 48 V, IDQ(MAIN) = 200 mA, VGS(PEAK) = 2.0 V, ƒ = 805 MHz, 3GPP WCDMA signal, PAR = 10 dB,

3.84 MHz BW

PAR @ 0.01% CCDF ptra083818nf_g1

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 DC Characteristics Maximum Ratings Parameter Symbol Value Unit Drain-source Voltage VDSS 105 VGate-source Voltage VGS –6 to +12 Operating Voltage VDD 0 to +55 Junction Temperature TJ 225 Storage Temperature Range TSTG –65 to +150 Characteristics Symbol Value Unit Conditions Thermal Resistance (main) RqJC 0.53 °C/W TCASE = 70°C, 81.3 W CW Characteristic Symbol Min. Typ. Max. Unit Conditions Drain-Source Breakdown Voltage VBR(DSS) 105 — — V VGS = 0 V, IDS = 10 mA Drain Leakage Current IDSS — — 1 µA VDS = 48 V, VGS = 0 V — — 10 VDS = 105 V, VGS = 0 V Gate Leakage Current IGSS — — 1 VGS = 10 V, VDS = 0 V On-State Resistance (main) RDS(on) — 0.12 — W VGS = 10 V, VDS = 0.1 V On-State Resistance (peak) — 0.08 — Operating Gate Voltage (main) VGS 3 3.5 4 V VDS = 48 V, IDQ = 0.20 mA Operating Gate Voltage (peak) — 2 — VDS = 48 V, IDQ = 0 mA Thermal Characteristics 1. Operation above the maximum values listed here may cause permanent damage. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. For reliable continuous operation, the device should be operated within the operating voltage range (VDD) specified above. 2. Parameters values can be affected by end application and product usage. Values may change over time.

Ordering Information

Moisture Sensitivity Level Type and Version Order Code Package Description Shipping PTRA083818NF V1 R5 PTRA083818NF-V1-R5 PG-HBSOF-6-2 Tape & Reel, 500 pcs Level Test Signal Package Temperature Unit

3 IPC/JEDEC J-STD-020 260 °C

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 5. CW Performance at various VDD Figure 6. CW Performance Small Signal

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Load Pull Performance Main Side Load Pull Performance – Pulsed CW signal: 10 µs, 10% duty cycle, 48 V, IDQ = 350 mA, class AB Peak Side Load Pull Performance – Pulsed CW signal: 10 µs, 10% duty cycle, 48 V, VGS(PEAK) = 2.2 V, class C P1dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] P1dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] P3dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] P3dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%]

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Evaluation Board, 733 – 805 MHz C218 C217 C216 C214 C215 C211 C210 C212 C213 C201 C208C202 C207 C203 C209 C204 C205 C101 C112 C110 C109 R103 C108 C107 R102 C111 C106 C102 R101 C103 C105 C104 PTRA083818NF_IN_02 A RO4360, 24 MIL RO4360,

24 MIL

PTRA083818NF_OUT_02 A (285) (285) V DD V DDV GS(PEAK) RF_IN RF_OUT V GS(MAIN) C206 C220 C219 C221 C222 PTRA083818N F_CD _ 02 -2 2-2 01 9 C218 C217 C216 C214 C215 C211 C210 C212 C213 C201 C208C202 C207 C203 C209 C204 C205 C101 C112 C110 C109 R103 C108 C107 R102 C111 C106 C102 R101 C103 C105 C104 PTRA083818NF_IN_02 A RO4360, 24 MIL RO4360, PTRA083818NF_OUT_02 A (285) (285) V DD V DDV GS(PEAK) RF_IN RF_OUT V GS(MAIN) C206 C220 C219 C221 C222 PTRA083818N F_CD _ 02 -2 2-2 01 9 Reference circuit assembly diagram (not to scale) Evaluation Board Part Number L TA/PTRA083818NF-V1 PCB Information Rogers 4360, 0.609 mm [0.024”] thick, 2 oz. copper, εr = 6.4, ƒ = 733 – 805 MHz Find Gerber files for this test fixture on the Wolfspeed Web site at www.wolfspeed.com/RF

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Components Information Component Description Manufacturer P/N Input C101 Capacitor, 10 pF ATC ATC800A100JT250T C102 Capacitor, 5.6 pF ATC ATC800A5R6CT250T C103, C104, C108, C110 Capacitor, 82 pF ATC ATC800A820JT250T C105, C106, C111, C112 Capacitor, 2.2 µF TDK Corporation C4532X7R1H225M160KA C107 Capacitor, 20 pF ATC ATC800A200JT250T C109 Capacitor, 9.1 pF ATC ATC100B9R1CW500XB R101, R102 Resistor, 10 ohms Panasonic Electronic Components ERJ-3GEY J100V R103 Resistor, 50 ohms Richardson C8A50Z4A U1 Hybrid Coupler Anaren X3C07P1-05S Output C201, C222 Capacitor, 2.2 µF TDK Corporation C4532X7R1H225M160KA C202 Capacitor, 2.7 pF ATC ATC800A2R7CT250T C203, C214 Capacitor, 82 pF ATC ATC800A820JT250T C204, C206, C215, C216, C217, C219, C220, C221 Capacitor, 10 µF TDK Corporation C5750X7S2A106M230KB C205, C218 Capacitor, 1 µF TDK Corporation C4532X7R2A105M230KA C207, C210 Capacitor, 3.9 pF ATC ATC800A3R9CT250T C208 Capacitor, 12 pF ATC ATC100B120JW500XB C209 Capacitor, 5.6 pF ATC ATC800A5R6CT250T C211 Capacitor, 1.2 pF ATC ATC800A1R2CT250T C212 Capacitor, 6.8 pF ATC ATC800A6R8CT250T C213 Capacitor, 100 pF ATC ATC800A101JT250T G1 G2 D2D1 V1 Main Peak V2 PG-HBSOF-6-1_PD_8-29-2020_bn Pin Description D1 Drain Device 1 (Main) D2 Drain Device 2 (Peak) G1 Gate Device 1 (Main) G2 Gate Device 2 (Peak) S Source (flange) V1 Drain video decoupling, no DC bias V2 NC or connected to GRD Pinout Diagram (top view)

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications – Package PG-HBSOF-6-2 (top view) 0.63ÊxÊ45 PG-HBSOF-6-2_prelim_08-30-20162ÊXÊ10 25.40 0.25 22.7ʱÊ0.15 2ÊXÊ7 0.52ÊXÊ1.00 G2 2ÊXÊ1.52 2ÊXÊ1.19 2ÊXÊ8.92 2ÊXÊ6.29 2ÊXÊ1.61 25.40 4ÊXÊ7.83 4.46 2ÊXÊ16.76 1.17 3.00 9.75 3.30 Y 9.75 2ÊXÊ3.51 1.57ʱÊ0.10 5.40 VIEWÊY 2ÊXÊ0.5 21.3 23.26 24.4 0.05 3.02 2.70 0.75 7G2 G1 D2 D1 VV VV S PG-HBSOF-6-2_prelim_08-30-2016 Diagram Notes–unless otherwise specified: 1. Mold/dam bar/metal protusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar/metal protusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 – drain; G1, G2 – gate; S – source, V – VDD. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = sourec, V1, V2 = no DC bias, NC or connect to GRD V2V1 PG-HBSOF-6-2_2017-01-112 X 10°

2 X 7°

0.63 x 45° Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = source; V1 = drain video decoupling, no DC Bias, V2 = NC or connected to GRD V2V1 2x 7° 0.63x 45° 2x 1.00 2x 1.19 2x 8.92 2x 6.29 2x 1.61 2x 3.51 2x 16.76 2x 1.52 1.57

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications (cont.) – Package PG-HBSOF-6-2 (bottom view) 2x 0.50 0.05 2.700.75 5.40 3.02 23.26 24.40 2 2 Diagram Notes—unless otherwise specified 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. V2 V1 PG-HBSOF-6-2_02.1_01-17-2017 D2 D1 G2 G1 8.All tolerances ± 0.1 mm unless specified otherwise. 9.All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = source; V1 = drain video decoupling, no DC Bias, V2 = NC or connected to GRD

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. For more information, please contact:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com Notes & Disclaimer Specifications are subject to change without notice. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for information purposes only. Wolfspeed products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed.