PTRA082808NF WOLFSPEED | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Features

  • Broadband internal input and output matching
  • Asymmetrical design - Main: P1dB = 115 W Typ - Peak: P1dB = 165 W Typ
  • Typical Pulsed CW performance, 820 MHz, 48 V, Doherty configuration - Output power at P3dB = 250 W - Efficiency = 55.6 % - Gain = 16.2 dB
  • Capable of handling 10:1 VSWR @ 48 V, 56.2 W (CW) output power
  • Human Body Model Class 1C (per ANSI/ESDA/JEDEC JS-001)
  • Integrated ESD protection
  • Low thermal resistance
  • Pb-free and RoHS compliant Thermally-Enhanced High Power RF LDMOS FET

280 W, 48 V, 790 – 820 MHz

Description

The PTRA082808NF is a 280-watt LDMOS FET intended for use in multi-standard cellular power amplifier applications in the 790 to 820 MHz frequency band. Features include input and output matching, high gain and thermally-enhanced package with earless flanges. Manufactured with Wolfspeed’s advanced LDMOS process, this device provides excellent thermal performance and superior reliability. RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed Doherty test fixture) VDD = 48 V, IDQ = 200 mA, VGS(PEAK) = 1.0 V, POUT = 56.2 W avg, ƒ = 820 MHz, 3GPP , channel bandwidth = 3.84 MHz, peak/average = 10 dB @ 0.01% CCDF Characteristic Symbol Min. Typ. Max. Unit Gain Gps 15.2 15.5 — dB Drain Efficiency hD 42.7 44.5 — % Adjacent Channel Power Ratio ACPR — –36.4 –33.5 dBc Output PAR @ 0.01% CCDF OPAR 6.6 7.3 — dB Note: All published data at TCASE = 25°C unless otherwise indicated ESD: Electrostatic discharge sensitive device—observe handling precautions! -80 -60 -40 -20 25 30 35 40 45 50 55 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 48 V, IDQ(MAIN) = 200 mA, VGS(PEAK) = 1.0 V, ƒ = 820 MHz, 3GPP WCDMA signal, PAR = 10 dB,

3.84 MHz BW

PAR @ 0.01% CCDF ptra082808nf_g1

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 DC Characteristics (each side) Maximum Ratings Parameter Symbol Value Unit Drain-source Voltage VDSS 105 VGate-source Voltage VGS –6 to +12 Operating Voltage VDD 0 to +55 Junction Temperature TJ 225 Storage Temperature Range TSTG –65 to +150 Characteristics Symbol Value Unit Conditions Thermal Resistance (main) RqJC 0.766 °C/W TCASE = 70°C, 56.2 W CW Thermal Resistance (peak) 0.208 TCASE = 70°C, 200 W CW Characteristic Symbol Min. Typ. Max. Unit Conditions Drain-Source Breakdown Voltage VBR(DSS) 105 — — V VGS = 0 V, IDS = 10 mA Drain Leakage Current IDSS — — 1 µA VDS = 50 V, VGS = 0 V — — 10 VDS = 105 V, VGS = 0 V Gate Leakage Current IGSS — — 1 VGS = 10 V, VDS = 0 V On-State Resistance (main) RDS(on) 0.07 0.3 0.66 W VGS = 10 V, VDS = 0.1 V On-State Resistance (peak) 0.01 0.12 0.325 Operating Gate Voltage (main) VGS 3.0 3.6 4.1 V VDS = 3.6 V, IDQ = 0.2 A Operating Gate Voltage (peak) — 1 — VDS = 1.0 V, IDQ = 0 A Thermal Characteristics 1. Operation above the maximum values listed here may cause permanent damage. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. For reliable continuous operation, the device should be operated within the operating voltage range (VDD) specified above. 2. Parameters values can be affected by end application and product usage. Values may change over time.

Ordering Information

Moisture Sensitivity Level Type and Version Order Code Package Description Shipping PTRA082808NF V1 R5 PTRA082808NF-V1-R5 PG-HBSOF-6-2 Tape & Reel, 500 pcs Level Test Signal Package Temperature Unit

3 IPC/JEDEC J-STD-020 260 °C

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 5. CW Performance at various VDD Figure 6. CW Performance Small Signal

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Load Pull Performance Main Side Load Pull Performance – Pulsed CW signal: 10 µs, 10% duty cycle, 48 V, IDQ = 250 mA Peak Side Load Pull Performance – Pulsed CW signal: 10 µs, 10% duty cycle, 48 V, IDQ = 350 mA P1dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] P1dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] hD [%] P3dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] P3dB Max Output Power Max Drain Efficiency Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] hD [%]

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Evaluation Board, 790 – 820 MHz C203 C212 C214 C215 C211 C210 C209C208 C202 C207 C201 C204 C205 R102 C110 R103 R101 C109 C105 C104 C103 C108 C101 C102 C107 C106 RO3006, 25 MIL (272) RO3006, 25 MIL (272) PTRA082808NF_IN_03A PTRA082808NF_OUT_03A RF_OUTRF_IN V DD V DD V GS(MAIN) V GS(PEAK) R105 R104 C206 C213 Reference circuit assembly diagram (not to scale) Evaluation Board Part Number L TA/PTRA082808NF-V1 PCB Information Rogers 3006, 0.635 mm [0.025”] thick, 2 oz. copper, εr = 3.66, ƒ = 790 – 820 MHz Find Gerber files for this test fixture on the Wolfspeed Web site at www.wolfspeed.com/RF

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Components Information Component Description Manufacturer P/N Input C101, C102 Capacitor, 5.6 pF ATC ATC800A5R6CT250T C103, C104, C108, C109 Capacitor, 56 pF ATC ATC800A560JT250T C105, C110 Capacitor, 10 µF TDK Corporation C5750X5R1H106K230KA C106 Capacitor, 10 pF ATC ATC800A100JT250T C107 Capacitor, 1.5 pF ATC ATC800A1R5CT250T R101, R102 Resistor, 10 ohms Panasonic Electronic Components ERJ-8GEY J100V R103 Resistor, 50 ohms Anaren C8A50Z4A R104, R105 Resistor, 1000 ohms Panasonic Electronic Components ERJ-8GEY J102V U1 Hybrid Coupler Anaren X3C07P1-05S Output C201 Capacitor, 3.0 pF ATC ATC800A3R0CT250T C202 Capacitor, 15 pF ATC ATC800A150JT250T C203, C210, C212 Capacitor, 82 pF ATC ATC800A820JT250T C204, C205, C206, C213, C214, C215 Capacitor, 10 µF , 100V TDK Corporation C5750X7S2A106M230KB C207 Capacitor, 6.8 pF ATC ATC800A6R8CT250T C208 Capacitor, 3.9 pF ATC ATC800A3R9CT250T C209 Capacitor, 2.2 pF ATC ATC800A2R2CT250T C211 Capacitor, 10 pF ATC ATC800A100JT250T G1 G2 D2D1 V1 Main Peak V2 PG-HBSOF-6-1_PD_8-29-2020_bn Pin Description D1 Drain Device 1 (Main) D2 Drain Device 2 (Peak) G1 Gate Device 1 (Main) G2 Gate Device 2 (Peak) S Source (flange) V1, V2 Drain video decoupling, no DC bias Pinout Diagram (top view)

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications – Package PG-HBSOF-6-2 (top view) 0.63ÊxÊ45 PG-HBSOF-6-2_prelim_08-30-20162ÊXÊ10 25.40 0.25 22.7ʱÊ0.15 2ÊXÊ7 0.52ÊXÊ1.00 G2 2ÊXÊ1.52 2ÊXÊ1.19 2ÊXÊ8.92 2ÊXÊ6.29 2ÊXÊ1.61 25.40 4ÊXÊ7.83 4.46 2ÊXÊ16.76 1.17 3.00 9.75 3.30Y 9.75 2ÊXÊ3.51 1.57ʱÊ0.10 5.40 VIEWÊY 2ÊXÊ0.5 21.3 23.26 24.4 0.05 3.02 2.70 0.75 7G2 G1 D2 D1 VV VV S PG-HBSOF-6-2_prelim_08-30-2016 Diagram Notes–unless otherwise specified: 1. Mold/dam bar/metal protusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar/metal protusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 – drain; G1, G2 – gate; S – source, V – VDD. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = sourec, V1, V2 = no DC bias, NC or connect to GRD V2V1 PG-HBSOF-6-2_2017-01-112 X 10°

2 X 7°

0.63 x 45° Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = source, V1, V2 = no DC bias, NC or connect to GRD V2V1 2x 7° 0.63x 45° 2x 1.00 2x 1.19 2x 8.92 2x 6.29 2x 1.61 2x 3.51 2x 16.76 2x 1.52 1.57 11. Pins: D1, D2 = drain; G1, G2 = gate; V1, V2 = drain video decoupling, no DC bias

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Package Outline Specifications (cont.) – Package PG-HBSOF-6-2 (bottom view) 2x 0.50 0.05 2.700.75 5.40 3.02 23.26 24.40 2 2 Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. Does not include mold/dam bar and metal protrusion. 7. Exposed metal surface is tin-plated, may not be covered by mold compound. 8. All tolerances ± 0.1 mm unless specified otherwise. 9. All metal surfaces are tin-plated, except area of cut. 10. Lead thickness: 0.25 mm. 11. Pins: D1, D2 = drain; G1, G2 = gate; S = source, V1, V2 = no DC bias, NC or connect to GRD V2 V1 PG-HBSOF-6-2_02.1_01-17-2017 D2 D1 G2 G1 11. Pins: D1, D2 = drain; G1, G2 = gate; V1, V2 = drain video decoupling, no DC bias

Rev. 06.2, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. For more information, please contact:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com Notes & Disclaimer Specifications are subject to change without notice. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for information purposes only. Wolfspeed products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed.