PTNC210604MD

PTNC210604MD WOLFSPEED | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 9

Technical content

Features

• On-chip matching for broadband operation
• Typical CW performance, 2200 MHz, 28 V, combined outputs - Output power at P3dB = 63 W - Linear Gain = 28 dB - Efficiency = 50.5%
• Capable of handling 10:1 VSWR @28 V, 10 W mod avg output power
• Integrated ESD protection
• Human Body Model Class 1A (per ANSI/ESDA/ JEDEC JS-001)
• Integrated temperature compensation
• Pb-free and RoHS compliant Wideband LDMOS Two-stage Integrated Power Amplifier

20 W + 40 W, 28 V, 1805 – 2200 MHz

Description

The PTNC210604MD is a wideband, two-stage, LDMOS integrated power amplifier. It incorporates internal matching for operation from 1805 MHz to 2200 MHz, and dual independent outputs with 20 W and 40 W of output power each. It is available in a 14-lead plastic overmold package with gull wing leads. RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed Doherty test fixture) VDD = 28 V, IDQ1M = 63 mA, IDQ2M = 150 mA, IDQ1P = 40 mA, VGS2P = 2.6 V, POUT = 10 W avg, ƒ = 2200 MHz, 3GPP WCDMA signal, channel bandwidth = 3.84 MHz, peak/average = 10 dB @ 0.01% CCDF Characteristic Symbol Min. Typ. Max. Unit Gain Gps 26 27 — dB Drain Efficiency hD 34.5 37 — % Adjacent Channel Power Ratio ACPR — –33 –28 dBc Output PAR @ 0.01% probability on CCDF OPAR 7.5 8.1 — dB Note: All published data at TCASE = 25°C unless otherwise indicated ESD: Electrostatic discharge sensitive device—observe handling precautions! 30 32 34 36 38 40 42 44 46 48 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1M = 63 mA, IDQ2M = 150 mA, IDQ1P = 40 mA, VGS2P= 2.6 V, ƒ = 2200 MHz, 3GPP WCDMA signal, PAR = 10 dB,

3.84 MHz BW

PAR @ 0.01% CCDF Gain Efficiency ptnc210604md_g1

Rev. 03.5, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 DC Characteristics Maximum Ratings Parameter Symbol Value Unit Drain-source Voltage VDSS 65 VGate-source Voltage VGS –6 to +10 Operating Voltage VDD 0 to +32 Junction Temperature TJ 225 Storage Temperature Range TSTG –65 to +150 Characteristic Symbol Min. Typ. Max. Unit Conditions Drain-Source Breakdown Voltage VBR(DSS) 64 — — V VGS = 0 V, IDS = 51.7 µA Drain Leakage Current – Stage 1 IDSS — — 0.1 µA VDS = 28 V, VGS = 0 V — — 1.0 VDS = 60 V, VGS = 0 V Drain Leakage Current – Stage 2 — — 0.1 VDS = 28 V, VGS = 0 V — — 1.0 VDS = 60 V, VGS = 0 V Gate Leakage Current – Stage 1 IGSS — —

0.1 VGS = 1 V, VDS = 0 V

Gate Leakage Current – Stage 2 — — On-State Resistance – Stage 1 (Main) RDS(on) — 5.8 — W VGS = 10 V, VDS = 0.1 V On-State Resistance – Stage 1 (Peak) — 3.7 — On-State Resistance – Stage 2 (Main) — 0.66 — On-State Resistance – Stage 2 (Peak) — 0.33 — Operating Gate Voltage VGS2 — 2.90 — V VDS = 28 V, IDQ1M = 63 mA — 2.76 — VDS = 28 V, IDQ2M = 150 mA — 2.72 — VDS = 28 V, IDQ1P = 40 mA — 2.11 — VDS = 28 V Fixture Operating Gate Voltage — 5.40 — VDS = 28 V, IDQ1M = 63 mA — 4.37 — VDS = 28 V, IDQ2M = 150 mA — 3.95 — VDS = 28 V, IDQ1P = 40 mA — 2.60 — VDS = 28 V

Rev. 03.5, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300

Ordering Information

Type and Version Order Code Package Shipping PTNC210604MD V2 R5 PTNC210604MD-V2-R5 PG-HB1DSO-14-4 Tape & Reel, 500 pcs Parameter Symbol Value Unit Conditions Thermal Resistance Stage 1 RqJC 4.6 °C/W TCASE = 70°C, 12 W CW Thermal Resistance Stage 2 1.5 TCASE = 70°C, 12 W CW Level Test Standard Package Temperature Unit

3 IPC/JEDEC J-STD-020 260 °C

Moisture Sensitivity Level Typical Performance (data taken in test fixture, 2100 MHz to 2200 MHz) Figure 1. Single-carrier WCDMA Drive-up Figure 2. Single-carrier WCDMA Broadband Performance

© 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. Figure 3. Single-carrier WCDMA Broadband Performance Figure 5. Small Signal CW Gain & Input Return Loss Figure 4. CW Performance Figure 6. IMD versus two-tone spacing

2100 MHz Gain

2150 MHz Gain

2200 MHz Gain

2100 MHz Eff

2150 MHz Eff

2200 MHz Eff

Rev. 03.5, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Load Pull Performance Main Side Load Pull Performance – Pulsed CW signal: 1 ms, 10% duty cycle, 28 V, IDQ =63 mA, 150 mA Peak Side Load Pull Performance – Pulsed CW signal: 1 ms, 10% duty cycle, 28 V, IDQ = 40 mA, VGS2P = 2.6 V P1dB Max Output Power Max PAE Freq [MHz] Zs [W] Zl [W] Gain [dB] P1dB [dBm] P3dB [W] PAE [%] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] PAE [%] P3dB Max Output Power Max PAE Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] PAE [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] PAE [%] P1dB Max Output Power Max PAE Freq [MHz] Zs [W] Zl [W] Gain [dB] P1dB [dBm] P3dB [W] PAE [%] Zl [W] Gain [dB] P1dB [dBm] P1dB [W] PAE [%] P3dB Max Output Power Max PAE Freq [MHz] Zs [W] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] PAE [%] Zl [W] Gain [dB] P3dB [dBm] P3dB [W] PAE [%]

Rev. 03.5, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Evaluation Board, 2100 – 2200 MHz C 112 R 109 C 111 R 105 C 206 R 111 R 104 C 202 R 107 C 203 R 108 C 201 C 110 C 207 C 205 C 108 C 106 R 103 C 105 C 101 C 103 R 101 R 102 C 102 C 104 R 110 C 107 R 106 C 204 C 109 C 208 C 209 C 210 C 211 PT NC 210604 MD _04 A RF _IN 2p1G RF _OUT pt n c21 060 4 m d_ C D_ 09 - 10 - 20 18 RO 4350 , 20 MIL , 2 oz U 1 (244 ) V DD 2M V DD 2P V DD 1M V G 2M V DD 1P V G 1M V G 2P V G 1P Reference circuit assembly diagram (not to scale) Evaluation Board Part Number L TA/PTNC210604MD-V2 PCB Information Rogers 4350, 0.508 mm [0.020”] thick, 2 oz. copper, εr = 3.66, ƒ = 2100 – 2200 MHz Find Gerber files for this test fixture on the Wolfspeed Web site at www.wolfspeed.com/RF

Rev. 03.5, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Components Information Component Description Manufacturer P/N C101, C103, C105, C107, C109, C111, C202, C206 Capacitor, 4.7 µF Murata Electronics North America GRM32ER71H475KA88L C102, C104, C106, C108, C110, C112, C203, C207 Capacitor, 10 µF Taiyo Yuden UMK325C7106MM-T C201, C205 Capacitor, 10 pF ATC ATC800A100JT250T C204 Capacitor, 1.8 pF ATC ATC600F1R8BT250XT C208 Capacitor, 2.0 pF ATC ATC600F2R0BT250XT C209 Capacitor, 2.7 pF ATC ATC600F2R7BT250XT C210, C211 Capacitor, 8.2 pF ATC ATC600F8R2BT250XT R101, R103 Resistor, 0 ohms Panasonic Electronic Components ERJ-3GEY0R00V R102 Resistor, 50 ohms Anaren C16A50Z4 R104, R105, R106, R107 Resistor, 1K ohms Panasonic Electronic Components ERJ-8GEY J102V R108, R109, R110, R111 Resistor, 4.3K ohms Panasonic Electronic Components ERJ-8GEY J432V U1 Hybrid Coupler Anaren X3C21P1-04S VD2/RFOUT B VD1 A VG2 A VG1 A RFIN A N/C N/C N/C N/C RFIN B VG1 B VG2 B VD1B VD2/RFOUT A ptmc210204md_PD_5-2-2016 Source: plated copper heat slug on backside of package Lead connections for PTNC210604MD Pinout Diagram (top view) Evaluation Board, 2100 – 2200 MHz (cont.)

Rev. 03.5, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 Diagram Notes–unless otherwise specified: 1. Mold/Dam Bar/Metal protrusion of 0.30 mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces are tin-plated, except area of cut. 8. Lead thickness: 0.25 mm. TOP VIEW END VIEW 2X 0.50 6.91 3.45 18.44 16.26 0.05 3.00 0.25 0.25 1.00 1.02 0° MIN. + 0.06… - 0.02 STAND OFF PG_HB1DSO-14-3_01_2-11-2020 SIDE VIEW DETAIL A SCALE 3:1 BOTTOM VIEW

2 X 10°

4 X 7°

2 X 2.02 1.86 SEE DETAIL A 0.10 MAX. 2.62 4 X 1.0213.06 4.00 9.02

0.52 X 45°

2 X 3.25 2 X 5.30 7.65 2.35 3.83 2 X 0.35 11 X 1.00 12 X 0.35 1.50 19.44 14.94 ± 0.15 1.27

Rev. 03.5, 2022-1-27 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. The information in this document is subject to change without notice. 4600 Silicon Drive | Durham, NC 27703 | Tel: +1.919.313.5300 © 2022 Wolfspeed, Inc. All rights reserved. Wolfspeed® and the Wolfstreak logo are registered trademarks and the Wolfspeed logo is a trademark of Wolfspeed, Inc. PATENT: https://www.wolfspeed.com/legal/patents The information in this document is subject to change without notice. For more information, please contact:

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com Notes & Disclaimer Specifications are subject to change without notice. “Typical” parameters are the average values expected by Wolfspeed in large quantities and are provided for information purposes only. Wolfspeed products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. No responsibility is assumed by Wolfspeed for any infringement of patents or other rights of third parties which may result from use of the information contained herein. No license is granted by implication or otherwise under any patent or patent rights of Wolfspeed.