PS11034

PS11034 POWEREX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272Intellimod™ Module Application Specific IPM

15 Amperes/600 Volts

Description: Powerex Application Specific IPMs (ASIPMs) are inteligent power modules that integrate power devices, gate drive and protection circuitry in a compact package for use in small inverter applications up to 20kHz. Use of application specific HVICs allow the designer to reduce inverter size and overall design time. Features: □ Compact Packages □ 3Phase Converter Bridge Built-in □ Integrated HVICs □ Direct Connection to DSP/CPU Applications: □ Small Motor Control □ Small Servo Motors □ General Purpose Inverters □ Pump and HVAC Motor Control Ordering Information: PS11034 is a 600V, 15 Ampere Application Specific Intellegent Power Module. Dimensions Inches Millimeters D 2.36 60.0 E 1.42 36.0 F 0.16 4.0 G 0.02 0.6 H 0.08 2.0 J 0.98 25.0 K 0.59 15.0 L 0.35 9.0 M 0.18 4.5 N 0.20 5.08 P 0.05 1.2 Q 1.80 45.72 Dimensions Inches Millimeters R 2.72 69.0 S 1.01 25.7 U 0.16 4.0 V 1.58 40.0 W 0.02 0.4 Y 0.02 0.6 AA 0.18 Rad. 4.5 Rad. BB 0.09 Rad. 2.25 Rad. CC 0.12 Rad. 3.0 Rad. DD 0.8 2.0 EE 2.19 55.5 FF 0.114 3.5 Outline Drawing and Circuit Diagram 21 3 546 10 1412 11 13 15 22 23 24 25 26 27 28 29 30 21 P1 22 R 23 S 24 T 25 N 26 P2 27 U 28 V TERMINAL CODE

1 CBU+

2 CBU-

3 CBV+

4 CBV-

5 CBW+

6 CBW-

16 GND

E D A N P Q (R) CC M LKJB (S) S T C X Z W U V U Y FF DD EE DD X AA BB Tc

Intellimod™ Module Application Specific IPM Powerex, Inc., 200 Hillis Street, Youngw ood, Pennsylvania 15697-1800 (724) 925-7272 Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Characteristics Symbol PS11034 Units Power Device Junction Temperature* T j -20 to 125 °C Storage Temperature T stg -40 to 125 °C Case Operating Temperature (See TC Measure Point Illustration) T C -20 to 100 °C Mounting Torque, M4 Mounting Screws — 13 in-lb Module Weight (Typical) — 70 Grams Isolation Voltage** V ISO 2500 Volts *The indicated values are specified considering the safe operation of all the parts within the ASIPM. The maximum rating for the ASIPM power chips (IGBT & FWDi) is Tj < 150. **60 Hz sinusoidal AC applied between all terminals and the base plate for 1 minute. IGBT Inverter Sector Supply Voltage (Applied between P2 - N2) V CC 450 Volts Supply Voltage, Surge (Applied between P2 - N2, Surge-Value) V CC(surge) 500 Volts Each IGBT Collector-Emitter Static Voltage (Applied between P2-U.V.W, U.V .W-N2) VP or VN 600 Volts Each IGBT Collector-Emitter Switching Voltage V P(S) or VN(S) 600 Volts (Applied between P2-U.V .W, U.V.W-N2 (Pulse)) Each IGBT Collector Current, TC = 25°C, “( )” means IC Peak Value ±IC (±ICP ) ±15 (±30) Amperes Converter Sector Repetitive Peak Reverse Voltage V RRM 800 Volts Recommended AC Input Voltage E a 220 Vrms DC Output Current (3-phase Rectifying Circuit) I DC 15 A Surge (Non-repetitive) Forward Current (1 Cycle at 60Hz, Peak Value Non-repetitive) IFSM 150 A I2t for Fusing (Value for One Cycle of Surge Current) I 2t9 3 A 2s Control Sector Supply Voltage VD , VDB -0.5 ~ 20 Volts Input Signal Voltage V CIN -0.5 ~ 7.5 Volts Fault Output Supply Voltage V FO -0.5 ~ 7.5 Volts Fault Output Current I FO 15 mA DC-Link IGBT Current Signal Amp Output Current I AMP 1m A

Intellimod™ Module Application Specific IPM Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-Emitter Saturation Voltage VCE(sat) IC = 15A, Tj = 25°C, VD = VDB = 15V, — — 2.9 Volts Input = ON (Shunt Voltage Drop Not Included) Diode Forward Voltage V EC Tj = 25°C, -IC = 15A — — 2.9 Volts Converter Diode Voltage V FR Tj = 25°C, IFR = 10A — — 1.5 Volts Converter Diode Reverse Current I RRM VR = VRRM , Tj = 125°C— — 8 m A Switching Times t on 1/2 Bridge Inductive, Input = 5V ↔ 0V, 0.3 0.6 1.5 µS tC(on) VCC = 300V, IC = 15A, Tj = 125°C, — 0.5 1.0 µS toff VD = 15V, VDB = 15V — 1.6 2.5 µS tC(off) Note: ton, toff include delay time of — 0.5 1.3 µS FWDi Reverse Recovery Time t rr the internal control circuit. — 0.12 — µS Short Circuit Endurance (Output, Arm, and @V CC ≤ 400V, Input = 5V → 0V (One-shot), • No Destruction Load Short-Circuit Modes) -20 °C ≤ Tj(start) ≤ 125°C, • F O Output by Protection Operation 13.5V ≤ VD = VDB ≤ 16.5V Switching SOA @V CC ≤ 400V, Input = 5V → 0V, • No Destruction Tj ≤ 125°C, IC < OC Trip Level, • No Protecting Operation 13.5V ≤ VD = VDB ≤ 16.5V • No F O Output TC Measure Point TC TC

Intellimod™ Module Application Specific IPM Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Control Sector Circuit Current (Average) I D Tj = 25°C, VD = 15V, VIN = 5V —— 50 mA IDB Tj = 25°C, VD = VDB = 15V, VIN = 5V —— 5m A Input ON Threshold Voltage V th(on) 0.8 1.4 2.0 Volts Input OFF Threshold Voltage V th(off) 2.5 3.0 4.0 Volts Input Pull-up Resistor Ri Applied between — 50 — kΩ Input Terminal-inside Power Supply PWM Input Frequency f PWM TC ≤ 100°C, Tj ≤ 125°C1 — 15 kHz Arm Shoot-through Blocking Time* t DEAD Relates to Corresponding Inputs 2.2 —— µS TC = -20°C ~ 100°C Input Interlock Sensing t int Relates to Corresponding Input — 100 — ns Inverter DC-link IGBT Current Vamp 100% I C = IOP(100%) , VD = 15V, Tj = 25°C 1.5 2.0 2.5 Volts Sense Voltage Output Signal Vamp 200% I C = IOP(200%) , VD = 15V, Tj = 25°C 3.0 4.0 5.0 Volts Inverter DC-link IGBT Current Vamp 250% I C = IOP(250%) , VD = 15V 5.0 —— Volts Sense Voltage Output Limit Vamp 0% I C = IOP(0%) , VD = 15V — 50 100 mV Over-Current Trip Level OC 14.2 17.7 25.0 Amperes Over-Current Delay Time t OC Tj = 25°C — 10 — µS Short-Circuit Trip Level SC — 30 — Amperes Short-Circuit Delay Time t SC — 2 — µs Trip Level UV D 11.0 12.0 13.0 Volts Supply Circuit Reset Level UV Dr 11.5 12.5 13.5 Volts Under-Voltage Trip Level UV DB TC = Tj = 25°C 10.1 10.8 11.6 Volts Protection Reset Level UV DBr 10.6 11.3 12.1 Volts Delay Time t dV — 10 — µS Fault Output Pulse Width* t FO Tj = 25°C 1.0 1.8 — mS Fault Output Current* I Fo(H) Open Collector Output —— 1 µA IFo(L) —— 15 mA * The dead-time has to be set externally by the CPU; it is not part of the ASIPM internal functions. Refer ro the graph on next page. *Fault output signalling is given only when the internal OC, SC, and UV protection circuits are activated. The OC, SC and UV protection (and fault output) operate for the lower arms only. The OC and SC protection fault output is given in a pulse format while that of UV protection is maintained thrpughout the duration of the under-voltage condition.

Intellimod™ Module Application Specific IPM Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Thermal Characteristics Characteristic Symbol Condition Min. Typ. Max. Units Junction to Case R th(j-c)Q Each IGBT —— 2.8 °C/Watt R th(j-c)D Each FWDi —— 3.9 °C/Watt R th(j-c)DR Each Converter —— 4.8 °C/Watt Contact Thermal Resistance R th(c-f) Case to Fin Per Module. —— 0.074 °C/Watt Thermal Grease Applied Recommended Conditions for Use Characteristic Symbol Condition Min. Typ. Value Units Supply Voltage V CC Applied across P2-N2 Terminals — 300 400 Volts Control Supply Voltage V D Applied between VD -GND 13.5 15.0 16.5 Volts VDB Applied between CBU+ & CBU-, 13.5 15.0 16.5 Volts CBV+ & CBV-, CBW+ & CBW- Control Supply dv/dt dV D /dt, dVDB /dt -1 — 1V / µs Input ON Voltage V CIN(on) Applied between 0 — 0.8 Volts Input OFF Voltage V CIN(off) UP, VP, WP, UN , VN , WN -GND 4.0 — 5.0 Volts Module Case Operating Temperature T C —— 100 °C PWM Input Frequency f PWM TC ≤ 100°C, Tj ≤ 125°C —— 15 kHz Allowable Minimum Input On-pulse Width tXX 1 —— µS Arm Shoot-through Blocking Time t DEAD Relate to Corresponding Inputs 2.2 —— µS CURRENTSENSE VOLTAGE OUTPUT SIGNAL,V AMP , (VOLTS) INVERTER DC-LINK IGBT CURRENT ANALOG SIGNALING (TYPICAL) 0 100 200 300 100% 200% VD = 15V Tj = 25°C ACTUAL LOAD PEAK CURRENT, (%), (IC = IO X /H208442 )

Intellimod™ Module Application Specific IPM Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 LEVEL SHIFT GATE DRIVE UV LOCK-OUT LEVEL SHIFT GATE DRIVE UV LOCK-OUT LEVEL SHIFT OC/SC DETECT GATE DRIVE UV LOCK-OUT GATE DRIVE UV LOCK-OUT AMP INPUT SIGNAL CONDITIONING (SHOOT -THROUGH INTERLOCK) N 2 N 1 T S R C BW –C BW +C BV –C BV +C BU –C BU VD U P VP W P U N VN W N FO Vamp GND W V U FAULT LOGIC HVASIC Functional Block Diagram