PQ1X151M2ZPH

PQ1XXX1M2ZPH SHARP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Sheet No.: OP06028 Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Parameter Symbol Rating Unit 300 V mA VInput voltage 350 mW Power dissipation Junction temperature 150 Operating temperature -30 to +85 Storage temperature -55 to +150 Soldering temperature 270(10s) Features Outline Dimensions Lead finish:Lead-free solder plating (Composition: Sn2Cu)

Applications

PQ1Xxx1M2ZPH Series Low Output Current, Compact Surface Mount Type Low Power-Loss Voltage Regulators (Ta=25°C) ON/OFF control terminal voltage Output current VIN VC IO PD Tj Topr °C Tstg Tsol *1 All are open except GND and applicable terminals. *2 At mounted on PCB *3 Overheat protection may operate at Tj:125°C to 150°C Model Line-up Output Voltage (TYP.) Model No. Output Voltage (TYP.) Model No. 1.5V 1.8V 2.5V 2.6V 2.7V PQ1X151M2ZPH PQ1X181M2ZPH PQ1X251M2ZPH PQ1X261M2ZPH PQ1X271M2ZPH 3.0V 3.3V PQ1X301M2ZPH PQ1X331M2ZPH 3.5V 3.7V 4.0V PQ1X351M2ZPH PQ1X371M2ZPH PQ1X401M2ZPH (1.9) (0.95) (0.95) (0.3) Control circuit 5 4 1 2 3 (Unit : mm)1.Compact surface mount package (2.9×1.6×1.1mm) 2.Low power-loss (Dropout voltage: TYP. 0.11 V/MAX. 0.26V at I O=60mA) Also compatible ceramic capacitors because of suppressing oscillation level 3.High ripple rejection (TYP. 70dB) 4.Built-in ON/OFF control function (Dissipation current at OFF-state: MAX. 1μA) 5.Built-in overcurrent and overheat protection functions *It is available for every 0.1V of output voltage (1.3V to 5.0V) 6.RoHS directive compliant 1.Cellular phones 2.Cordless phones 3.Personal information tools (PDA) 4.Cameras/Camcoders 5.PCMCIA cards for notebook PCs 2.8V 2.9V PQ1X281M2ZPH PQ1X291M2ZPH 4.5V 5.0V PQ1X451M2ZPH PQ1X501M2ZPH GND Noise reduction (Nr) DC input (VIN) ON/OFF control terminal (VC) DC output (VO) Product mass:(0.015g) ( ) : Typical dimensions 30X Lead finish identification mark 5-0.4±0.1 3.3MAX. (2.9TYP. excluding remaining gate) 1.3MAX 0 to 0.1 1.1±0.2 0.15±0.1 1.6±0.2 0.2MIN. 2.8±0.3 15°MAX. 0.2MIN.

Sheet No.: OP06028

Electrical Characteristics

V mA mA dB V V Parameter Output peak current Recommended output current Load regulation Line regulation Temperature coefficient of output voltage Ripple rejection Output noise voltage Dropout voltage ON-state voltage for control ON-state current for control Symbol Conditions MIN. TYP. MAX. Unit -300 - 150 - 10 50 - 20 100 3.0 20 0.05 RR 70 - 0.11 0.20 1.8 53 0 0.4 Quiescent current -Output OFF-state dissipation current 1 PQ1Xxx1M2ZPH Series Output voltage Refer to the following table.1 Iop - 180 -- - RegL1 RegL2 RegL3 Io=5 to 60mA Io=5 to 100mA Io=5 to 150mA 160 mV mV mV RegI - mV TCVO IO=10mA, Tj=-25 to +75°C -- mV/°C Refer to Fig.2 - Vno(rms) VI-O1 VI-O2 IO=60mA IO=150mA Refer to the following table.2 μV 0.26 0.4 VC(ON) -- - IC(ON) VC=1.8V OFF-state voltage for control VC(OFF) -- V Iq IO=0mA 150 200 μA μA μAIqs VC=0.2V 7 Input voltage when output voltage falls 0.1V from that at Vin=Vo(TYP)+1.0V. PQ1X181M2ZPH PQ1X251M2ZPH PQ1X271M2ZPH PQ1X281M2ZPH PQ1X291M2ZPH 1.8601.81.740 PQ1X151M2ZPH 1.5601.51.440 2.5602.52.440 PQ1X261M2ZPH 2.6602.62.540 2.7602.72.640 V 2.8602.82.740 2.9602.92.840 Symbol MIN. TYP. MAX. UnitModel No. Table.1 Output Voltage Table.2 Output Noise Voltage Symbol MIN. TYP. MAX. UnitModel No. Fig.1 Test Circuit VIN=VO(TYP)+1V to VO(TYP)+6V(MAX.9.0V) A A A V PQ1X301M2ZPH PQ1X331M2ZPH PQ1X351M2ZPH 3.0603.02.940 3.3663.33.234 3.5703.53.430 Iq, I qs VIN 1μF VC IC (ON) 0.01 μF 4.7μF RL IO VO (Unless otherwise specified,VIN=VO(TYP) + 1.0V, IO=30mA,VC=1.8V, Ta=25°C) VO V Input voltage VIN - 92.3 - 10Hz<f<100kHz, CnF=0.1μF, IO=30mA

4 Applied to PQ1X151M2ZPH and PQ1X181M2ZPH

5 Output current shall be the value when output voltage lowers 0.3V from the voltage at IO=30mA.

6 Excluding PQ1X151M2ZPH and PQ1X181M2ZPH

8 In case that the control terminal ( ③ pin) is open, output voltage should be OFF state. VO PQ1X371M2ZPH 3.7743.73.626 PQ1X401M2ZPH 4.0804.03.920 PQ1X451M2ZPH 4.5904.54.410 PQ1X501M2ZPH 5.1005.04.900 PQ1X181M2ZPH PQ1X251M2ZPH PQ1X271M2ZPH PQ1X281M2ZPH PQ1X291M2ZPH PQ1X151M2ZPH PQ1X261M2ZPH PQ1X301M2ZPH PQ1X331M2ZPH PQ1X351M2ZPH PQ1X371M2ZPH PQ1X401M2ZPH PQ1X451M2ZPH PQ1X501M2ZPH Vno(rms) μV 35--

Sheet No.: OP06028 PQ1Xxx1M2ZPH Series eo Fig.2 Test Circuit for Ripple Rejection ei VIN VC RL f=400Hz(sine wave) ei(rms)=100mV V IN=VO(TYP)+1.0V VC=1.8V IO=10mA RR=20log(ei(rms)/eo(rms)) Fig.3 Power Dissipation vs. Ambient Temperature Fig.4 Overcurrent Protection Characteristics (Typical Value) Ambient temperature Ta (°C) Note) Oblique line portion:Overheat protection may operate in this area. Relative output voltage (%) 100 0 0.1 0.2 0.3 0.4 Output current I O (A) Power dissipation P D (mW)Output voltage fluctuation VO (mV) –60 –50 –40 –30 –20 –10 –30–20 140 120100806040200 Junction temperature T j (°C) Output voltage VO (V) Input voltage VIN (V) 01234567 RL= Fig.5 Output Voltage Fluctuation vs . Junction Temperature (PQ1X 301M2ZPH)(Typical Value) VIN=3.8V IO=30mA VC=1.8V CO=4.7μF (Ceramic capacitor) Fig.6 Output Voltage vs. Input Voltage (PQ1X301M2ZPH)(Typical Value) Ta=25°C CIN=1μF (Ceramic capacitor) C O=4.7μF (Ceramic capacitor) 100 200 300 400 -30 -25 0 25 50 75 85 100 125 150 Ta=25°C

Sheet No.: OP06028 PQ1Xxx1M2ZPH Series Circuit operating current IBIAS (mA) Input voltage VIN (V) 01234567 RL= Dropout voltage VI-O (mV) 0.35 0.3 0.25 0.2 0.15 0.1 0.05 –30–20 80 140 1201006040200 Junction temperature Tj (°C) VI-O2 : IO=150mA VI-O1: IO=60mA Quiescent current Iq (μA) –30–20 140 120100806040200 Junction temperature Tj (°C) 200 180 160 140 120 100 VIN=VO +1V VC=1.8V IO=0A Ripple rejection RR (dB) 0.1 1 10 100 Input ripple frequency f (kHz) No Cn Dropout voltage VI-O (V) 0.3 0.2 0.1 0 50 100 150 Output current IO (mA) Fig.7 Circuit Operating Current vs. Input Voltage (PQ1X301M2ZPH)(Typical Value) Ta=25°C CIN=1μF (Ceramic capacitor) C O=4.7μF (Ceramic capacitor) Fig.8 Dropout Voltage vs. Junction Temperature (PQ1X301M2ZPH)(Typical Value) VIN :Voltage when output voltage is 95% Fig.9 Quiescent Current vs. Junction Temperature (Typical Value) Cn=0.1μF Cn=0.01μF Ta=25°C VIN=3.8V VC=1.8V IO=10mA ei (rms) =100mV CO=10μF Fig.11 Dropout Voltage vs. Output Current (Typical Value) Fig.10 R i pple Rejection vs. Input Ripple Frequency (PQ1X281M2ZPH )(Typical Value)