PQ1S30

PQ1S30 SHARP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

(Unit: mm) Low Power-Loss Voltage Regulator Tec.PW970702 n General Description n Features n Applications n Output Voltage Line-up PQ1S30 series Low Output Current, Compact Surface Mount Type Low Power-Loss Voltage Regulators Output voltage 2.2V PQ1S22 PQ1S23 PQ1S25 PQ1S27 PQ1S28 PQ1S29 PQ1S30 PQ1S31 PQ1S32 PQ1S33 PQ1S47 PQ1S50 2.3V 2.5V 2.7V 2.8V 2.9V 3.0V 3.1V 3.2V 3.3V 4.7V 5.0V Model No. Output voltage Model No. ( ): Typical values 2.2–0.2 3.3 to 0.3 15°MAX 1.2–0.2 0.15 to 0.1

3.8 MAX

(3.4)

1.4 MAX

0 to 0.1 (0.3) 0.32–0.1 x 6 (0.95) (0.95) 1S30 6 5 4 1 2 3 Internal connection

1 ON/OFF control terminal(Vc)

4 DC output(Vo)

6 DC input(Vin)

Sharp's PQ1S30 series are 180mA output, compact resin mold surface mount package type low power-loss voltage regulators. They contribute to improve the performance of analog circuit due to high ripple rejection. They are suitable for energy and space saving of battery drive compact equipment such as portable equipment, personal information tools. (1) Compact surface mount package(3.4 x 2.2 x 1.2mm) (2) Low power-loss (Dropout voltage: TYP.0.1V/MAX. 0.2V at Io=60mA) (3) High ripple rejection(TYP.60dB) (4) Low current operation type (Dissipation current at no load: TYP. 170µA) (5) Built-in ON/OFF control function (Dissipation current at OFF-state: MAX. 0.1µA) (6) Low voltage operation type (Input voltage: MIN. 1.8V) (7) Overcurrent, overheat protection functions (1) Cellular phones (2) Cordless phones (3) Personal information tools(PDA) (4) Cameras/Camcoders (5) PCMCIA cards for notebook PCs * It is available for every 0.1V(1.8V to 5.5V) n Outline Dimensions (Notice) • In the absence of device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

• Specifications are subject to change without notice for improvement. (Internet) • Data for Sharp's optoelectronic/power devices is provided on internet. ( Address http://www.sharp.co.jp/ecg/)

Low Power-Loss Voltage Regulator Tec.PW970702 n Absolute Maximum Ratings PQ1S30 series (Ta=25°C) Parameter Symbol Ratings Unit *1 Input voltage Vin 16 V *1 ON/OFF control terminal voltage Vc 16 V Output current Io 240 mA *2 Power dissipation Pd 400 mW *3 Junction temperature Tj 150 °C Operating temperature Topr - 30 to +80 °C Storage temperature Tstg - 55 to +150 °C Soldering temperature Tsol 260(for 10s) °C (Ta=25°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Output voltage Vo - 150 V mA mA Output current Io -- -Recommended output current - 180 240 - mV - 80 mV -m V Load regulation RegL1 RegL2 RegL3 Io=5mA to 60mA Io=5mA to 100mA Io=5mA to 150mA Line regulation RegI Vi=Vo+1V to Vo+6V - 5 20 mV Temperature coefficient of output voltageTcVo Io=10mA,Tj= - 25 to 75°C 10Hz<f<100kHz, Cn=0.1µF, Io=30mA 0.05 - %/°C - 30 - - 50 - µV Ripple rejection RR Vno -6 0 90 150 -d B Dropout voltage Output noise voltage Vo=3V series Vo=5V series Vi-o1 Vi-o2 Io=60mA,*5 Io=150mA,*5 - 0.1 0.2 - 0.29 0.4 V *6 ON-state voltage for controlVc(on) - 1.8 - - V ON-state current for controlIc(on) Vc=1.8V - 12 150 30 µA OFF-state voltage for controlVc(off) - - - 0.6 V 200 µA µA Quiescent current Iq Io=0mA Output OFF-state dissipation current Iqs Vin=8V,Vc=0.4V Response time(Rise time) Tr Io=30mA,Vc=0 → 1.8V, Co=10µF Noise control terminal voltage -- - - 0.1 ms- 0.3 - V- 1.25 - *4 Output current shall be the value when output voltage lowers 0.3V from the voltage at Io=30mA. *5 Dropout voltage when output voltage lowers 100mV from the voltage at Vin=Vo+1V. *6 In case of opening control terminal, output voltage turns off. Refer to the next page. *1 All are open except GND and applicable terminals. *2 At surface-mounted condition *3 Overheat protection may operate at 125<=Tj<=150°C. n Electrical Characteristics

Tec.PW970702 Low Power-Loss Voltage RegulatorPQ1S30 series (Ta=25°C) Parameter Symbol Condition MIN. TYP. MAX. Unit Output voltage PQ1S22 PQ1S23 PQ1S25 PQ1S27 PQ1S28 PQ1S29 PQ1S30 PQ1S31 PQ1S32 PQ1S33 PQ1S47 PQ1S50 Vo - 2.22.12 2.28 2.22 2.38 2.42 2.58 2.62 2.78 2.72 2.88 2.82 2.98 2.92 3.08 3.02 3.18 3.12 3.28 3.215 3.385 4.58 4.82 4.88 5.12 2.3 2.5 2.7 2.8 2.9 3.0 3.1 3.2 3.3 4.7 5.0 V n Output Voltage Line-up * It is available for every 0.1V (1.8V to 5.5V). As of August 1997