PQ1M155M2SPQ

PQ1MXX5M2SPQ SHARP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Sheet No.: OP06037 Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Parameter Symbol Rating Unit 500 V VInput voltage 900 mW Power dissipation Junction temperature 150 Operating temperature -30 to +85 Storage temperature -55 to +150 Soldering temperature 270(10s) Features Outline Dimensions Lead finish:Lead-free solder plating (Composition: SnBi)

Applications

(Ta=25°C) ON/OFF control terminal voltage Output current *1 All are open except GND and applicable terminals. *2 At surface-mounted condition *3 Overheat protection may operate at Tj:125°C to 150°C Model Line-up Model No. 1.8V 2.5V 3.3V 5.0V PQ1M185M2SPQ PQ1M255M2SPQ PQ1M335M2SPQ PQ1M505M2SPQ (Unit : mm) Output Voltage (TYP.) mA 1 2 5 42 Internal connection Lot No.(OLD DIN standard) Control circuit 0.42 ±0.1 1.6 ±0.2 4.3±0.3 4.5±0.2 1.5±0.2 1.5±0.2 1.5±0.2 0.4±0.05 ① Noise control terminal (Nr) ② GND ③ ON/OFF control terminal (Vc) ④ DC input (Vin) ⑤ DC output (VO) 1.Compact surface mount package (4.5×4.3×1.5mm) 2.Output current : MAX.500mA 3.Power dissipation : MAX.900mW (At mounting PCB shown in Fig.3) 4.Low power-loss (Dropout voltage : MAX. 0.7V at I O=500mA) 5.High ripple rejection(TYP.65dB) 6.Built-in ON/OFF control function 7.Built-in overcurrent, overheat protection functions 8.Use of ceramic capacitor is possible as output smooth capacitor 9.RoHS directive compliant 1.CD-ROM drives 2.DVD-ROM drives 3.Digital Still Cameras V IN VC IO PD Tj Topr Tstg Tsol Compact Surface Mount Type Low Power-Loss Voltage Regulators3 3M Product mass:(0.055g) ( ) : Typical dimensions 1.5V PQ1M155M2SPQ

Sheet No.: OP06037

Electrical Characteristics

V dB Parameter Output voltage Load regulation Line regulation Ripple rejection ON-state voltage for control ON-state current for control Symbol Conditions MIN. MAX. Unit 65RR Quiescent current Output OFF-state dissipation current Refer to the table below. mV/°C 0.4 -OFF-state voltage for control 20 70 PQ1M255M2SPQ PQ1M335M2SPQ 3.234 PQ1M185M2SPQ 2.440 4.900 V Symbol MIN. TYP. MAX. UnitModel No. TYP. 3.0 0.1 - 0.7- V Conditions PQ1Mxx5M2SPQ Series 200- 60 Output noise voltage 40 - Dropout voltage 5 1.8 - μA V - V μA-- 0.6

4 Excluding PQ1M155M2SPQ,PQ1M185M2SPQ

5 Dropout voltage when output voltage lowers 0.1V from the voltage at VIN=VO+1V. 3.3 2.5 5.0 3.366 2.560 5.100 (Unless otherwise specified, VIN=3.0V,IO＝30mA,VC=1.8V,Ta＝25°C(PQ1M155M2SPQ,PQ1M185M2SPQ)) (Unless otherwise specified, VIN=VO(TYP.)+1.0V,IO＝30mA,VC=1.8V,Ta＝25°C(PQ1M255M2SPQ,PQ1M335M2SPQ,PQ1M505M2SPQ)) VO RegL IO=5mA to 500mA mV PQ1M185M2SPQ PQ1M255,335,505M2SPQ RegI VIN=VO(TYP.)+1V to VO(TYP.)+6V(MAX9V) VIN=3.0V to 7.8V mV TCVO IO=10mA,Tj=-25 to +75°C Refer to Fig.2 Vno(rms) PQ1M155,185M2SPQ PQ1M335M2SPQ 10kHz<f<100kHz,Cn=0.1μF,IO=30mA 10kHz<f<100kHz,Cn=0.1μF,IO=30mA - 30 - μV Vi-o IO=500mA VC(ON) IC(ON) VC=1.8V VC(OFF) Iq IO=0mA 1 Iqs VC=0.2V mA 6 In case of opening control terminal ③,output voltage turns off. VO PQ1M505M2SPQ 1.74 1.8 1.86 VIN=3.0V,IO＝30mA,VC=1.8V,Ta＝25°C(PQ1M155M2SPQ,PQ1M185M2SPQ) VIN=VO(TYP.)+1.0V,IO＝30mA,VC=1.8V,Ta＝25°C(PQ1M255M2SPQ,PQ1M335M2SPQ,PQ1M505M2SPQ) A A A Io V Vo Vc 1μF Iq,I qs Vin IC(ON) 0.01 μF 1μF RL Fig.1 Test Circuit ei eo V Vin 1μF Vc 0.1μF 1μF RL f=400 Hz(sine wave) ei(rms)=100 mV Vin=Vo(TYP)+1.0V Vc=1.8V,Io=30mA RR=20log(ei(rms)/eo(rms)) Fig.2 Test Circuit for Ripple Rejection Table.1 Output Voltage Temperature coefficient of output voltage PQ1M155M2SPQ VIN=3.0V to 7.5V 0.4 1.44 1.5 1.56PQ1M155M2SPQ

Sheet No.: OP06037 Fig.3 Power Dissipation vs. Ambient Temperature Output current IO (A) Relative output voltage (%) Fig.4 Overcurrent Protection Characteristics (Typical Value) Input voltage VIN (V) Circuit operating current IBIAS (mA) Fig.6 Circuit Operating Current vs. Input Voltage (Typical Value) (PQ1M335M2SPQ) Power dissipation PD (mW) Ambient temperature Ta (°C) Note) Oblique line portion:Overheat protection may operate in this area. Input voltage VIN (V) Output voltage VO (V) Fig.5 Output Voltage vs. Input Voltage (Typical Value) (PQ1M335M2SPQ) Junction temperature Tj (°C) Fig.7 Quiescent Current vs. Junction Temperature (Typical Value) PQ1Mxx5M2SPQ Series 100 200 300 400 500 600 700 800 900 1000 -40 -25 0 25 50 8575 125100 150 Material PCB Size Copper foil area Thickness of copper PCB Copper foil Mounting PCB 100 01 23 4 56 7 RL=∞Ω RL=13.2Ω RL=6.6Ω Ta=25°C CIN=CO=1μF (Ceramic capacitor) C N=0.01μF (Ceramic capacitor) 0 12 3 4567 RL=∞Ω RL=13.2Ω RL=6.6Ω Ta=25°C CIN=CO=1μF (Ceramic capacitor) CN=0.01μF (Ceramic capacitor) -50 -25 0 25 50 75 125 100 200 300 400 500 600 700 800 900 1000 VIN=VO(TYP.)+1.0V VC=1.8V IO=0mA Quiescent current Iq(μA)

Sheet No.: OP06037 Fig.10 Dropout Voltage vs. Output Current (Typical Value) Fig.8 Dropout Voltage vs. Junction Temperature (Typical Value) (PQ1M335M2SPQ) Junction temperature Tj (°C) Dropout voltage Vi–O(V) Fig.9 Output Voltage Deviation vs. Junction Temperature (Typical Value) (PQ1M335M2SPQ) Junction temperature Tj (°C) Output voltage deviation ΔVO(mV) Output current IO (mA) Dropout voltage VI-O (V) Ripple rejection RR (dB) Input ripple frequency f(kHz) Fig.11 Ripple Rejection vs. Input Ripple Frequency (Typical Value) (PQ1M335M2SPQ) Fig.12 Output Peak Current vs. Junction Temperature (Typical Value) Junction temperature Tj (°C) Output peak current IOP(A) ■ Example of application ON/OFF signal High : Output ON Load : Output OFFLow or Open PQ1Mxx5M2SPQ Series -50 -25 0 25 50 75 125 100 0.30 0.40 0.50 0.60 0.70

0.80 VIN=Input voltage when output voltage

falls 0.1V from that at VIN=VO(TYP.)+1.0V VC=1.8V,IO=500mA CIN=CO=1μF(Ceramic capacitor) CN=0.01μF(Ceramic capacitor) -50 -25 0 25 50 75 125 100 -40 -50 -30 -20 -10 50 VIN=4.3V,VC=1.8V,IO=30mA, CIN=CO=1μF(Ceramic capacitor) CN=0.01μF(Ceramic capacitor) 0 50 100 150 200 250 300 350 400 450 500 0.4 0.5 0.6 0.3 0.2 0.1 Ta=25°C,VC=1.8V VIN=Input voltage when output voltage falls 0.1V from that at VIN=VO(TYP.)+1.0V CIN=CO=1μF(Ceramic capacitor) CN=0.01μF(Ceramic capacitor) 0.1 1 10 100 Ta=25°C,VIN=4.3V,VC=1.8V IO=30mA,ei(rms)=100mV CIN=CO=1μF(Ceramic capacitor) CN=0.1μF(Ceramic capacitor) -50 -25 0 25 50 75 125 100 0.40 0.45 0.50 0.55 0.60 0.65 VIN=VO(TYP.)+1.0V IOP:Output current when output voltage falls 0.3V from that at IO=30mA. 2 1 VIN CIN 0.01μF CＯ