PQ1KAXX3MZPH SHARP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Sheet No.: OP06063 Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. ■ Features Outline Dimensions

Applications

(Unit : mm) Compact Surface Mount Type Low Power-Loss Voltage Regulators Lot No.(OLD DIN standard) Parameter Symbol Rating Unit 300 V VInput voltage 150 °C Power dissipation *3 Junction temperature Operating temperature Storage temperature -55 to +150 Soldering temperature 270(10s) (Ta=25°C) Output current *1 All are open except GND and applicable terminals. *2 At surface-mounted condition *3 Overheat protection may operate at Tj:125°C to 150°C Output control voltage 400*2 1.Compact surface mount package (3.4×2.2×1.2mm) 2.Output current : MAX.300mA 3.Built-in ON/OFF control function 4.Built-in overcurrent, overheat protection functions 5.Use of ceramic capacitor is possible as output smooth capacitor 6.RoHS directive compliant 1.CD-ROM drives 2.DVD-ROM drives 1.5V PQ1KA153MZPH 1.8V 2.5V 3.0V PQ1KA183MZPH PQ1KA253MZPH PQ1KA303MZPH 3.3V 5.0V 9.0V PQ1KA333MZPH PQ1KA503MZPH PQ1KA903MZPH -40 to +85 VIN Model Line-up Output Voltage (TYP.) Model No. Absolute Maximum Ratings VC IO mA PD mW Tj Topr Tstg Tsol DC output (VO)

5 GND

ON/OFF control terminal (VC) 5 4 3 4 KA33 DC input(VIN) Product mass:(0.025g) ( ) : Typical dimensions Internal connection diagram Specific IC Noise reduction (Nr) Lead finish:Lead-free solder plating (Composition: Sn2Cu) (0.95) (0.95) 0.32±0.1×6 3.8MAX (3.4)

1.4 MAX

1.2±0.20～0.1 0.15±0.1 (0.3) 2.2±0.2 0.2 MIN 0.2 MIN 3.3±0.3 15˚MAX

Electrical Characteristics

Symbol MIN. TYP. MAX. UnitParameter Conditions Output noise voltage Dropout voltage PQ1KAxx3MZPH Series Refer to Fig.2 Refer to list.1 Fig.1 Standard measuring circuit of Regulator portion Fig.2 Standard measuring circuit of critical rate of ripple rejection ±0.5 ― 0.4 0.2 51 5 0.05 RR mV mV dB 55 ― V 10 60 0.5 1.8 VO VIN ― 2.5 15 ― V VO<3V,IO=5 to 300mARegL VO≥3V,IO=5 to 300mA % RegI VO<3V,VIN=VO(TYP)+1V to VO(TYP)+6V VO≥3V,VIN=VO(TYP)+1V to VO(TYP)+6V % TCVO IO=10mA, Tj=0 to 100°C % Vno(rms) 10Hz<f<100kHz,Cn=0.1μF,IO=30mA μV VC(ON) IC(ON) VC(OFF) Excluding PQ1KA153MZPH , PQ1KA183MZPH VI-O IO=300mA, 0.4 0.7 ― V―― VC=1.8V μA ― V Iq IO=0mA 800― μA550 Iqs VC=0.2V ― μA1― (Unless otherwise specified condition shall be VIN=VO(TYP.)+1.0V,IO=30mA,VC=1.8V,Ta=25°C) Parameter Symbol Conditions MIN. TYP. MAX. Input voltage Temperature coefficient of output voltage On-state voltage for control7 On-state current for control Off-voltage for control Output off-state consumption current 5, 6 Typical value of 3.3V output model.4 5 Input voltage when output voltage falls 0.1V from that at VIN=VO(TYP)+1.0V. 7 In case that the control terminal (③ pin) is non-connection,output voltage should be OFF state. VIN=VO(TYP.)+1.0V, IO=30ｍA, VC=1.8V,Ta=25°C PQ1KA153MZPH PQ1KA183MZPH PQ1KA253MZPH PQ1KA303MZPH VO 1.440 1.740 2.440 1.560 1.860 2.560 3.060 V 1.5 1.8 2.5 3.02.940 PQ1KA333MZPH PQ1KA503MZPH PQ1KA903MZPH 3.234 4.900 3.366 5.100 9.180 3.3 5.0 9.08.820 f=400Hz Sine wave ei(rms)=100mV V IN=VO(TYP.)+1.0V VC=1.8V IO=10mA RR=20log {ei(rms)/Eo(rms)} List.1 Output voltage Line-up Sheet No.: OP06063 A A V 1μF 0.01μF 1μF Io RL Vo Iq,Iqs VIN VC A IC(ON) 4 V 1μF 0.1μF 1μF RL eo VIN VC ei 2 5

Sheet No.: OP06063 Fig.3 Power Dissipation vs. Ambient Temperature PQ1KAxx3MZPH Series Output current IO (A) Relative output voltage (%) Fig.4 Overcurrent Protection Characteristics 0 12 3 45670 RL=11Ω RL=22Ω RL=∞Ω Input voltage VIN (V) Circuit operating current IBIAS (mA) Fig.6 Circuit Operating Current vs. Input Voltage (Typical Value) (PQ1KA333MZPH) Ta=25°C CIN=CO=1μF (Ceramic capacitor) C N=0.01μF (Ceramic capacitor) 100 200 300 400 500 -40 -25 0 25 50 8575 125100 150 Power dissipation PD (mW) Ambient temperature Ta (°C) Note) Oblique line portion:Overheat protection may operate in this area. 01 23 4 56 7 RL=110Ω RL=22Ω RL=11Ω Ta=25°C CIN=CO=1μF (Ceramic capacitor) C N=0.01μF (Ceramic capacitor) Input voltage VIN (V) Output voltage VO (V) Fig.5 Output Voltage vs. Input Voltage (Typical Value) (PQ1KA333MZPH) -40 -20 0 20 40 60 100 80 120 1400 100 200 300 400 500 600 VIN=VO(TYP.)+1.0V, VC=1.8V,Io=0mA Junction temperature Tj (°C) Fig.7 Quiescent Current vs. Junction Temperature (Typical Value) Fig.8 Dropout Voltage vs. Junction Temperature (Typical Value) (PQ1KA333MZPH) -40 -20 0 20 40 60 100 80 120 140 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Junction temperature Tj (°C) Dropout voltage Vi–O(V) VIN=Input voltage when output voltage falls 0.1V from that at VIN=VO(TYP.)+1.0V VC=1.8V,IO=300mA, CIN=CO=1μF(Ceramic capacitor) CN=0.01μF(Ceramic capacitor) 100 Quiescent current Iq(μA)

Sheet No.: OP06063 Fig.10 Dropout Voltage vs. Output Current (Typical Value) PQ1KAxx3MZPH Series 0 50 100 150 200 250 3000 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Output current IO (mA) Dropout voltage VI-O (V) Ta=25°C,VC=1.8V,VIN=Input voltage when output voltage falls 0.1V from that at VIN=VO(TYP.)+1.0V -40 -20 0 20 40 60 100 80 120 140 0.1 0.2 0.3 0.4 0.5 Fig.12 Output Peak Current vs. Junction Temperature (Typical Value) Junction temperature Tj (°C) Output peak current IOP(A) VIN=VO(TYP.)+1.0V IOP:Output current when output voltage falls 0.3V from that at IO=30mA. ■ Example of application ON/OFF signal High : Output ON : Output OFFLow or Open -40 -20 0 20 40 60 100 80 120 140 -40 -50 -30 -20 -10 VIN=4.3V,VC=1.8V, IO=30mA, CIN=CO=1μF(Ceramic capacitor) CN=0.01μF(Ceramic capacitor) Fig.9 Output Voltage Deviation vs. Junction Temperature (Typical Value) (PQ1KA333MZPH) Junction temperature Tj (°C) Output voltage deviation ΔVO(mV) 0 1 10 100 Ta=25°C,VIN=4.3V,VC=1.8V IO=30mA, CO=1μF(Ceramic capacitor) CN=0.1μF(Ceramic capacitor) Ripple rejection RR (dB) Input ripple frequency f(kHz) Fig.11 Ripple Rejection vs. Input Ripple Frequency (Typical Value) (PQ1KA333MZPH) VIN CIN 0.01μF CＯ Load