PQ090DNA1ZPH

PQXXXDNA1ZPH SHARP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. ■ Features Outline Dimensions

Applications

(Unit : mm) 1.AV equipment 2.OA equipment Sheet No.: OP06051 Compact Surface Mount type Low Power-Loss Voltage Regulators Model Line-up Output Voltage (TYP.) Model No. Parameter Symbol Rating Unit V VInput voltage Power dissipation Junction temperature 150 Operating temperature -40 to +85 Storage temperature -40 to +150 Soldering temperature 260(10s) Absolute Maximum Ratings (Ta=25°C) Output control voltage Output current *1 All are open except GND and applicable terminals. *2 PD: With infinite heat sink *3 Overheat protection may operate at Tj:125°C to 150°C VIN VC IO PD Tj Topr Tstg Tsol A 1.Output current : 1A 2.High isolation voltage VIN:MAX.24 V 3.Low dissipation current (Dissipation current at no load: MAX. 8mA Output OFF-state dissipation current: MAX.5μA) 4.Built-in ON/OFF function 5.Built-in overcurrent and overheat protection functions 6.Built-in ASO protection function 7.Ceramic capacitor compatible 8.RoHS directive compliant 5.0V 3.3V 8.0V PQ033DNA1ZPH PQ050DNA1ZPH PQ080DNA1ZPH PQ090DNA1ZPH PQ120DNA1ZPH 12.0V 9.0V Lead finish:Lead-free solder plating (Composition: Sn2Cu) Product mass:(0.2g) NC GND Specific IC DC input (VIN) ON/OFF control terminal (VC) DC output(VO) Epoxy resin ( ) : Typical dimensions (0.3) (1.7)(0.9) (0.3) 050DNA1 1 2 4 5 6.6MAX. 2.5MIN. 9.7MAX. 5.2±0.5 5.5±0.2 2.1±0.5 (0～0.25) 0.3+0.2 -0.1 4-(1.27) 0.7 MAX. H Lead finish identification mark

Sheet No.: OP06051

Electrical Characteristics

ON-state voltage for control ON-state current for control Symbol Conditions MIN. MAX. Unit 1.0 60RR 200- -Quiescent current Output OFF-state dissipation current %/°C Refer to Fig.3 OFF-state voltage for control TYP. V 0.2 - 2.0 - V 0.8--- V OFF-state current for control 2- PQxxxDNA1ZPH Series (Unless otherwise specified,condition shall be VIN=5V,IO=0.5A,VC=2.7V,Ta=25°C) VO RegL IO=5mA to 1A RegI Temperature coefficient of output voltageTCVO Tj=0 to +125°C, IO=5mA ±0.01 VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs VC=0.4V IO=0A IO=0A, VC=0.4V μA μA mA μA Dropout voltage VI-O 0.5- 0.2 V

5 In case of opening control terminal ②, output voltage turns off

VIN=4 to 14V,IO=5mA (1) PQ033DNA1ZPH VIN=3.5V,IO=0.5A VC=2.7V 3.33.218 3.382 %1.0- 0.2 dB Parameter Output voltage Load regulation Line regulation Ripple rejection ON-state voltage for control ON-state current for control Symbol Conditions MIN. MAX. Unit 1.0 60RR 200- -Quiescent current Output OFF-state dissipation current %/°C Refer to Fig.3 OFF-state voltage for control TYP. V 0.2 - 2.0 - V 0.8--- V OFF-state current for control 2- (Unless otherwise specified,condition shall be VIN=7V,IO=0.5A,VC=2.7V,Ta=25°C) VO RegL IO=5mA to 1A RegI Temperature coefficient of output voltageTCVO Tj=0 to +125°C, IO=5mA ±0.01 VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs VC=0.4V IO=0A IO=0A, VC=0.4V μA μA mA μA Dropout voltage VI-O 0.5- 0.2 V VIN=6 to 16V,IO=5mA (2) PQ050DNA1ZPH ,IO=0.5A VC=2.7V 5.04.875 5.125 %1.0- 0.2 4 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. dB Parameter Output voltage Load regulation Line regulation Ripple rejection ON-state voltage for control ON-state current for control Symbol Conditions MIN. MAX. Unit 1.0 60RR 200- -Quiescent current Output OFF-state dissipation current %/°C Refer to Fig.3 OFF-state voltage for control TYP. V 0.2 - 2.0 - V 0.8--- V OFF-state current for control 2- (Unless otherwise specified,condition shall be VIN=10V,IO=0.5A,VC=2.7V,Ta=25°C) VO RegL IO=5mA to 1A RegI Temperature coefficient of output voltageTCVO Tj=0 to +125°C, IO=5mA ±0.01 VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs VC=0.4V IO=0A IO=0A, VC=0.4V μA μA mA μA Dropout voltage VI-O 0.5- 0.2 V VIN=9 to 19V,IO=5mA (3) PQ080DNA1ZPH ,IO=0.5A VC=2.7V 8.07.8 8.2 %1.0- 0.2 4 Input voltage shall be the value when output voltage is 95% in comparison with the initial value.

Sheet No.: OP06051 dB Parameter Output voltage Load regulation Line regulation Ripple rejection ON-state voltage for control ON-state current for control Symbol Conditions MIN. MAX. Unit 1.0 60RR 200- -Quiescent current Output OFF-state dissipation current %/°C Refer to Fig.3 OFF-state voltage for control TYP. V 0.2 - 2.0 - V 0.8--- V OFF-state current for control 2- PQxxxDNA1ZPH Series (Unless otherwise specified,condition shall be VIN=11V,IO=0.5A,VC=2.7V,Ta=25°C) VO RegL IO=5mA to 1A RegI Temperature coefficient of output voltageTCVO Tj=0 to +125°C, IO=5mA ±0.01 VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs VC=0.4V IO=0A IO=0A, VC=0.4V μA μA mA μA Dropout voltage VI-O 0.5- 0.2 V VIN=10 to 20V,IO=5mA (4) PQ090DNA1ZPH VC=2.7V 9.08.775 9.225 %1.0- 0.2 dB Parameter Output voltage Load regulation Line regulation Ripple rejection ON-state voltage for control ON-state current for control Symbol Conditions MIN. MAX. Unit 1.0 60RR 200- -Quiescent current Output OFF-state dissipation current %/°C Refer to Fig.3 OFF-state voltage for control TYP. V 0.2 - 2.0 - V 0.8--- V OFF-state current for control 2- (Unless otherwise specified,condition shall be VIN=14V,IO=0.5A,VC=2.7V,Ta=25°C) VO RegL IO=5mA to 1A RegI Temperature coefficient of output voltageTCVO Tj=0 to +125°C, IO=5mA ±0.01 VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs VC=0.4V IO=0A IO=0A, VC=0.4V μA μA mA μA Dropout voltage VI-O 0.5- 0.2 V VIN=13 to 23V,IO=5mA (5) PQ120DNA1ZPH ,IO=0.5A VC=2.7V 12.011.7 12.3 %1.0- 0.2 4 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. ,IO=0.5A4 4 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. 1 3 Load VIN CIN VO CO Fig.1 Example of application High:Output ON Low or Open:Output OFF ON/OFF signal

Sheet No.: OP06051 PQxxxDNA1ZPH Series Ambient temperature Ta (°C) Note) Oblique line portion:Overheat protection may operate in this area. Power dissipation PD (W) Output voltage VO (V) Output current IO (A) Fig.5 Overcurrent Protection Characteristics (PQ033DNA1ZPH) A A V A VIN 1μF 10μF VC IC VO IO RL Iq ei eo 2.7V 5 V~ 1μF IO RL 10μF VIN VC Fig.2 Test Circuit Fig.3 Test Circuit for Ripple Rejection f=120Hz(sine wave) ei(rms)=0.5V V IN= 5V (PQ033DNA1ZPH) 7V (PQ050DNA1ZPH) 10V (PQ080DNA1ZPH) 11V (PQ090DNA1ZPH) 14V (PQ120DNA1ZPH) I O=0.3A RR=20log(ei(rms)/eo(rms)) 0.5 1.5 2.0 3.5 4.0 1.0 2.5 3.0 VIN=24V VIN=15V VIN=12V VIN=5V VIN=3.8V VIN=7VVIN=9V Fig.4 Power Dissipation vs. Ambient Temperature VC=2.7V CIN=1μF CO=10μF Ta=Room temp.

Sheet No.: OP06051 PQxxxDNA1ZPH Series Output voltage VO (V) Output current IO (A) 2.0 4.0 1.0 3.0 5.5 5.0 VIN=24V VIN=15V VIN=12V VIN=5.5V VIN=7V VIN=9V VIN=24V VIN=20V VIN=9.5V VIN=15V VIN=12V VIN=11V Fig.6 Overcurrent Protection Characteristics (PQ050DNA1ZPH) Fig.7 Overcurrent Protection Characteristics (PQ090DNA1ZPH) VC=2.7V CIN=1μF CO=10μF Ta=Room temp. VC=2.7V CIN=1μF CO=10μF Ta=Room temp. Output voltage VO (V) Output current IO (A) VIN=24V VIN=17V VIN=12.5V VIN=14V VIN=15V -50 -25 0 25 50 75 100 125 150 11.8 11.82 11.84 11.86 11.88 11.9 11.92 11.94 11.96 11.98 VIN=14V VC=2.7V IO=0.5A CIN=1μF CO=10μF VC=2.7V CIN=1μF CO=10μF Ta=Room temp. Fig.8 Overcurrent Protection Characteristics (PQ120DNA1ZPH) Output voltage VO (V) Output current IO (A) Fig.9 Output Voltage vs. Ambient Temperature (PQ120DNA1ZPH) Output voltage VO (V) Ambient temperature Ta (°C) 0 24 68 1 0 RL=24Ω (IO=0.5A) RL=∞Ω (IO=0A) VC=2.7V Ta=Room temp. CIN=1μF CO=10μF 12 14 16 18 RL=12Ω (IO=1A) 02 4 6 8 1 5 VC=2.7V Ta=Room temp. CIN=1μF CO=10μF 10 12 14 RL=12Ω (IO=1A) RL=24Ω (IO=0.5A) RL=∞Ω (IO=0A) Fig.10 Output Voltage vs. Input Voltage (PQ120DNA1ZPH) Input voltage VIN (V) Output voltage VO (V) Fig.11 Circuit Operating Current vs. Input Voltage (PQ120DNA1ZPH) Input voltage VIN (V) Circuit operating current IBIAS (mA)

Sheet No.: OP06051 PQxxxDNA1ZPH Series -50 -25 0 25 50 75 100 125 150 2.2 2.4 2.6 2.8 3.2 3.4 3.6 3.8 VIN=14V VC=2.7V IO=0A CIN=1μF CO=10μF -50 -25 0 25 50 75 100 125 150 0.05 0.1 0.15 0.2 0.25 0.3 VIN=11.4V VC=2.7V IO=0.5A CIN=1μF CO=10μF Fig.12 Quiescent Current vs. Ambient Temperature (PQ120DNA1ZPH) Quiescent current Iq(μA) Ambient temperature Ta (°C) Dropout voltage VI-O(V) Fig.13 Dropout Voltage vs. Ambient Temperature (PQ120DNA1ZPH) Ambient temperature Ta (°C) 0.1 1 10 100 1 000 ei(rms)=0.5V VC=2.7V IO=0.3A CO=10μF Ta=Room temp. VIN=14V 40 0 0.25 0.5 0.75 1 ei(rms)=0.5V f=120HZ V C=2.7V CO=10μF Ta=Room temp. VIN=14V Fig.14 Ripple Rejection vs. Input Ripple Frequency (PQ120DNA1ZPH) Ripple rejection RR (dB) Input ripple frequency f (kHz) Ripple rejection RR (dB) Fig.15 Ripple Rejection vs. Output Current (PQ120DNA1ZPH) Output current IO(A) 0.5 1.5 -40 -20 0 20 40 60 80 100 120 2.0 Cu area 740mm2 Cu area 180mm2 Cu area 100mm2 Cu area 70mm2 Cu area 36mm2 Fig.16 Power Dissipation vs. Ambient Temperature (Typical Value) Ambient temperature Ta (°C) Power dissipation PD (W) Mounting PCB PCB Cu Material Size Cu thickness : Glass-cloth epoxy resin : 50×50×1.6mm : 35μm