PS-PMOS GREYSTONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM OUTSIDE PARTICULATE MATTER SENSOR PMOS SERIES PRODUCT DESCRIPTION The PMOS Outside Particulate Matter Sensor uses an optical sensor based on laser scattering principles and features innovative contamination resistance technology to perform highly accurate and reliable PM measurements. The replaceable sensor measures particles of PM1.0, PM2.5, PM4.0, or PM10, with a continuous operation lifetime of more than 8 years. The sensor will provide long- term reliability and high resolution particle size binning for the detection of environmental dust and other particles. TYPICAL INSTALLATION For complete installation and wiring details, please refer to the product installation instructions. The PMOS series should be mounted on an outside North facing wall, under the eaves which will provide protection from direct sunlight and wind. The PMOS can be mounted directly to buildings wall face using the provided mounting holes. There are 0.85” knockouts for conduit connection. The basic PMOS has a screw block terminal provided for connection to the Building Automation System. SENSOR Laser scatter method (field replaceable) PARTICULATE SIZE PM1.0, PM2.5, PM4.0, or PM10 (selectable) MASS CONCENTRATION RANGE 0 - 1000 ug/m3 RESOLUTION 1 ug/m3 ACCURACY ±10 ug/m3 (0 - 100 ug/m3), ±10% (100 - 1000 ug/m3) RESPONSE TIME 1 second SENSOR LIFETIME >8 years ANALOG MODEL Consumption: 75 mA max @ 24 Vdc, 100 mA max @ 24 Vac Output Signals: 4-20 mA (sourcing) or 0-5 Vdc / 0-10 Vdc (selectable) Output Drive Capability: Current - 550Ω max Voltage - 5,000Ω min Output Scale: 0 to 1000 ug/m3 (menu selectable) BACnet® MODEL Consumption: 50 mA max @ 24 Vdc, 80 mA max @ 24 Vac Interface: MS/TP , 2 wire RS-485 Baud Rate: 9600, 19200, 38400, 57600, 76800 or 115200 (menu selectable) Address Range: 0 - 127 (menu selectable) MODBUS MODEL Consumption: 50 mA max @ 24 Vdc, 80 mA max @ 24 Vac Interface: MS/TP , 2 wire RS-485, RTU Baud Rate: 9600, 19200, 38400, 57600, 76800 or 115200 (menu selectable) Address Range: 1-255 (menu selectable) PM ALARM RELAY (OPTIONAL) Contact Ratings: Form C (NO + NC), 2A @ 140 Vac, 2A @ 30 Vac Setpoint + Hysteresis: Programmable via menu DISPLAY Internal LCD for setup Display values Mass Concentration: 0 - 1000 ug/m3 Air Quality Index: 0 - 500 AQI Good/Moderate/Poor (menu selectable) POWER SUPPLY 24 Vac/dc ±20% (non-isolated half-wave rectified) PROTECTION CIRCUITRY Reverse voltage protected, over-voltage protected OPERATING CONDITIONS -10 to 60°C (14 to 140°F), 20 to 80 %RH non-condensing STORAGE CONDITIONS -30 to 60°C (-22 to 140°F) ENCLOSURE Polycarbonate, IP65 (NEMA 4X) ENCLOSURE DIMENSIONS 130mm W x 130mm H x 75mm D (5.12” x 5.12” x 2.95”) WIRING Screw terminal block (14 to 22 AWG) COUNTRY OF ORIGIN Canada SPECIFICATIONS 130 mm 5.11” 130 mm 5.11” 74.7 mm 2.94”
PRINTED IN CANADA Copyright © Greystone Energy Systems Inc. All Rights Reserved www.greystoneenergy.com PS-PMOSXXX-05 Greystone Energy Systems, Inc.
150 English Drive, Moncton,
New Brunswick, Canada E1E 4G7 Ph: +1 (506) 853-3057 Fax: +1 (506) 853-6014 North America: 1-800-561-5611 E-mail: mail@greystoneenergy.com WIRING INFORMATION TERMINAL FUNCTION PWR + 24 Vdc/24 Vac (HOT) COM Common OUT Analog Output NO Relay Normally Open Contact R. COM Relay Common NC Relay Normally Closed Contact If BACnet® or Modbus Output Selected B(+) Network Output A(-) Network Output SHLD Network Output MCERTS CERTIFICATION The PMRMC series incorporates the SPS30 PM sensor for accurate and reliable PM sensing. The SPS30 particulate matter sensor has achieved MCERTS certification, which proves the performance of the PM sensor. In addition, the certification confirms that the SPS30 can be easily integrated into applications that comply with the European Air Quality Standard DIN EN 15267. The MCERTS certification scheme was established by the UK’s Environment Agency and is built around international and European standards to ensure high- quality environmental data monitoring. The SPS30 underwent laboratory and field tests and has been proven to fulfill the latest MCERTS and associated DIN EN 15267 European air quality standards. Compliance with the above-mentioned standards requires low intra-model variability (≤ 5 µg/m3), making the SPS30 the first choice for integration into applications requiring high precision. The certification is issued by the Sira Certification Service, one of the leading notified bodies in Europe. They are also accredited according to ISO/IEC 17065 UKAS and are part of the Canadian Standards Association (CSA Group). Learn more about the MCERTS certification on the website of CSA Group or have a look at the certificate as linked below.. Website: https://www.csagroupuk.org/services/mcerts/mcerts-product-certification/mcerts-certified-products/mcerts-certified-products-indicative-ambient-particulate-monitors/ Certificate: https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9.6_Particulate_Matter/Datasheets/Sensirion_PM_Sensors_Datasheet_SPS30_MCERTS-Certificate_2020.pdf PRODUCT PMOS Outside Particulate Matter Sensor RELAY X R None Alarm Relay OUTPUT X B M Analog Output Only BACnet® and Analog Outputs Modbus and Analog Outputs ORDERING PMOS PART NUMBER NOTE: Greystone Energy Systems, Inc. reserves the right to make design modifications without prior notice. ACCESSORIES PMFRSM Replaceable sensor module and wire harness PWR COM OUT SHLD N.C. R. COM N.O. STATUS LED MENU ROLL V mA