PM65 TRUMPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

65 WATT MEDICAL POWER SUPPLIES

DESCRIPTION

The PM65 series of compact, open PCB constructed, AC-DC switching power supplies are capable of delivering 50 to 65 watts of continuous power. They are ideally suited for use in medical equipment not for patient contact, and operate at 85 to 264 V AC input voltage without the need of voltage selection. All models meet the safety requirements of UL, CSA and IEC.

FEATURES

‧ Low safety ground leakage current ‧ Meet EN 55011 and FCC Class B ‧ Small size, light weight ‧ 100% burn-in ‧ Wide input range 85 to 264 V AC ‧ Input surge current protection ‧ Overvoltage protection ‧ Overcurrent protection INPUT SPECIFICATIONS Input voltage： 85 to 264 V AC Input frequency： 47 to 63 Hz Input current： 1.60A（rms）for 115V AC 1.00A（rms）for 230V AC Leakage current： 90uA max. @ 115V AC, 60Hz 150uA max. @ 230V AC, 50Hz PM65 SERIES Safety Standard Approvals ： OUTPUT SPECIFICATIONS Output voltage/current ： See rating chart Total output power ： 65 watts maximum Ripple and noise ： 1﹪peak to peak maximum Overvoltage protection ： Provided on output #1 only; set at 112 - 132 ﹪of its nominal output voltage Overcurrent protection ： All outputs protected to short circuit conditions Temperature coefficient ： All outputs ±0.04 ﹪/℃maximum Transient response ： Maximum excursion of 4﹪or better on all models, recovering to 1﹪of final value within 500us after a 25 ﹪ step load change ENVIRONMENTAL SPECIFICATIONS Operating temperature： 0℃ to +70 ℃ Storage temperature： -40℃ to +85 ℃ Relative humidity： 5﹪to 95﹪non-condensing Derating： Derate from 100﹪at +50℃ linearly to 50% at +70℃ GENERAL SPECIFICATIONS Switching frequency ： 32KHz ±5KHz Efficiency ： 70﹪minimum on single output models with V o ≧12V , 65% minimum on the others. Hold-up time ： 10 msec minimum at 110VAC Line regulation ： ±0.5﹪maximum at full load Inrush current ： 15 amps @ 115V AC, or 30 amps @ 230V AC, at 25℃ cold start Withstand voltage ： 4000V AC from input to output 1500V AC from input to ground 500V AC from output to ground MTBF ： 400,000 hours minimum at full load at 25℃ ambient , calculated per MIL-HDBK-217F EMC PERFORMANCE (EN60601-1-2: 2001) EN55011: Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion , Class A EN61000-3-3: Line flicker EN61000-4-2: ESD,± 8KV air and ± 6KV contact EN61000-4-3: Radiated immunity, 3V/m, for 80~2500MHz EN61000-4-4: Fast transient/burst, ± 2KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 3A/m EN61000-4-11: V oltage dips, 30% reduction for 500ms, 60% reduction for 100ms and >95% reduction for 10ms Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● sales@trumpower.com ● www.TRUMPower.com UL 2601-1 CSA C22.2 No. 601.1 TÜV EN60601-1 (MDD)

OUTPUT VOLTAGE/CURRENT RATING CHART Maximum (1) (2) Output #1 Output #2 Output #3 Output #4 Output PM65-10A 5V 0A 10A 2% (N/A) (N/A) (N/A) 50W PM65-12A 12V 0A 5.5A 1% (N/A) (N/A) (N/A) 65W PM65-13A 15V 0A 4.5A 1% (N/A) (N/A) (N/A) 65W PM65-14A 24V 0A 3.0A 1% (N/A) (N/A) (N/A) 65W PM65-16A 30V 0A 2.5A 1% (N/A) (N/A) (N/A) 65W PM65-17A 36V 0A 2.2A 1% (N/A) (N/A) (N/A) 65W PM65-23A +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% (N/A) (N/A) 65W PM65-24A +5V 1A 6.0A 3% +15V 0.4A 3.0A 5% (N/A) (N/A) 65W PM65-25A +5V 1A 6.0A 3% +24V 0.3A 2.0A 5% (N/A) (N/A) 65W Notes: (1) All multiple output models may be operated at no-load without damage. At no-load, output voltage tolerance increases to 10% (2) Safety agency approvals are for the a bove listed models in PCB format. To order a model with a metallic L-bracket or box, change suffix “A” to “B” for L-bracket format or to “C” for enclosed format (mechanical details shown in page 7-2), e.g. PM65-25C. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3081 and Molex 2878 series crimp terminal. 5. Weight: 400 grams (PCB format) 6. The “ ＊” marked mounting hole is for system grounding through a metallic stand-off to the system chassis. PIN CHART PIN MODEL 1 2 3 4 5 6 7 8 PM65-10A PM65-13A PM65-16A PM65-12A PM65-14A PM65-17A OUTPUT OUTPUT OUTPUT OUTPUT #1 RETURN RETURN RETURN RETURN PM65-23A PM65-25A PM65-24A OUTPUT OUTPUT COMMON RETURN COMMON RETURN OUTPUT OUTPUT #2 N.C. N.C. PM65-30A PM65-32A PM65-39A PM65-31A PM65-33A OUTPUT OUTPUT COMMON RETURN COMMON RETURN OUTPUT OUTPUT OUTPUT #3 N.C. PM65-40A OUTPUT OUTPUT COMMON RETURN COMMON RETURN OUTPUT OUTPUT OUTPUT OUTPUT Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● sales@trumpower.com ● www.TRUMPower.com