PM51A

PM51A BEHA-AMPROBE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

www.Amprobe.comAmprobe® Test Tools Data Sheet No hassle warranty No waiting. No shipping charges. Our commitment to high-quality products and customer service is demonstrated by our industry exclusive “No Hassle” warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. (note: $500 MSLP limit) PM51A Digital Multimeter The ultimate shirt-pocket DMM with frequency & capacitance This shirt-pocket-sized meter is only 3/8” thick and weighs less than 3 oz. With full functionality offering AC and DC voltage to 600 V, resistance to 40 Megohm, capacitance to 3000 μF, frequency to 1 MHz, continuity w/beeper, and diode test. Fully autoranging, this meter offers seven different measurement functions with 27 full ranges of measurement. The digital display is oversized with large digits and an- nunciators. In spite of its size, this meter is fully safety rated to CAT III 300 V, CAT II 600 V and is UL approved. No other meter offers this small size with such performance and high safety ratings. Measures AC and DC voltage, resistance, continuity with beeper, ■ capacitance and frequency Fully autoranging with 7 measurement functions and 27 ranges ■ Large oversize digital display with measurement results ■ and the unit icon Data Hold freezes measurement value on the display One-year, ■ no-hassle warranty 600V 300V

Amprobe® Test Tools www.Amprobe.com Data Sheet General Specifications PM51A Digital Multimeter Display and update rate 3-3/4 digits 4000 counts; Updates 3 per second nominal Operating temperature 0 °C - 40 °C Altitude Operating below 2000 m Storage temperature -20 °C ~ 60 °C, < 80 % R.H. (with battery removed) Temperature coefficient Nominal 0.15 x (specified accuracy)/ °C @ (0 °C ~ 18 °C or 28 °C ~ 40 °C), or otherwise specified Sensing Average sensing Overload protection 600 V dc and V ac rms Low battery Below approx. 2.4 V Power supply 3 V standard button battery x 1 (IEC-CR2032; ANSI-NEDA-5004LC) Power consumption (typical) 2 mA Automatic Power Off (APO) timing Idle for 30 minutes APO consumption (typical) 2.2 μA Dimension L 113 mm x W 53 mm x H 10.2 mm (4.4 x 2.1 x 0.4 in) Weight Approx. 78 gm (3 oz) Special features Data Hold, and 30 ms MAX Hold Agency approvals CE, cULus Safety Meets IEC61010-1, UL61010B-1, CAN/CSA-C22.2 No. 1010.1-92, CAT II 600 V and CAT III 300 V, Pollution Degree 2, Class 2 E.M.C. Meets EN61326

www.Amprobe.com Data SheetPM51A Digital Multimeter Function Range Accuracy Specifications DC Voltage NMRR > 50 dB @ 50 Hz/60 Hz CMRR > 120 dB @ dc, 50 Hz/60 Hz; Rs=1 kW Input impedance 10 MW, 30 pF nominal; (1000 MW for 400.0 mV range) AC Voltage 50 Hz - 60 Hz 4.000 V, 40.00 V, 400.0 V ± (2.0 %+5 dgt) 60 Hz - 500 Hz 4.000 V, 40.00 V, 400.0 V ± (3.0 %+5 dgt) 50 Hz - 500 Hz 600 V ± (3.5 %+5 dgt) Input impedance 10 MW, 30 pF nominal CMRR > 60 dB @ dc to 60 Hz, Rs=1 k W Capacitance 500.0 nF, 5.000 μF, 50.00 μF, 500.0 μF, 3000 μF 1Additional 50.00 nF range accuracy is not specified 2Accuracies with film capacitor or better 3Updates > 1 minute on large values 4Specified with battery voltage above 2.8 V (half full battery). Accuracy decreases gradually to 12% at low battery warning voltage of approx 2.4 V. Resistance 4.000 K W, 40.00 KW, 400.0 KW ± (1.0 %+4 dgt) Open circuit voltage 0.4 V DC typical Frequency

400 Hz, 4 kHz, 40 kHz, 400 kHz, 1 MHz

1 ± (0.5 %+4 dgt) 1Specified at input voltage < 20 V ac rms input signal: Sine-wave, or square-wave with duty cycle > 40 % & < 70 % Sensitivity (V-peak) 5 Hz - 100 kHz > 1.3 Vp 100 kHz - 500 kHz > 2.2 Vp 500 kHz - 1 MHz > 4.2 Vp Diode Tester Test current (typical) 0.25 mA Open circuit voltage 1.6 V dc Audible Continuity Tester Open circuit voltage 0.4 V dc typical Audible threshold 65 W ±55 W

www.Amprobe.comwww.Amprobe.comAmprobe® Test Tools Data Sheet Amprobe® Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 tel: 877-AMPROBE Amprobe® Test Tools Europe In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0 ©2007 Amprobe Test Tools. All rights reserved. 9/2007 2277152 D-US-N Rev B Included Accessories battery (installed) and users manual. Optional Accessories H-PMA Protective holster VC3A Zippered carrying case PM51A Digital Multimeter