PM300CLA120

PM300CLA120 POWEREX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Intellimod™ L-Series Three Phase IGBT Inverter

300 Amperes/1200 Volts

1Rev. 12/05 Description: Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: £ Complete Output Power Circuit £ Gate Drive Circuit £ Protection Logic – Short Circuit – Over Temperature Using On-chip Temperature Sensing – Under Voltage £ Low Loss Using 5th Generation IGBT Chip £ Low EMI/RFI Applications: £ Inverters £ UPS £ Motion/Servo Control £ Power Supplies Ordering Information: Example: Select the complete part number from the table below -i.e. PM300CLA120 is a 1200V,

300 Ampere Intellimod™ Intelligent

Power Module. Type Current Rating V CES Amperes Volts (x 10) PM 300 120 Outline Drawing and Circuit Diagram VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT PUVWN VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT UN VWPC WP WPFO VWP1VUN1 VVPC VP VPFO VVP1 VUPC UP UPFO VUP1 VUNC UNFO VN VVN1 VVNC VNFO WN VWN1 VWNC WNFO

17 VUNC

14 UPFO

16 VUP1

18 UNFO

13 VUPC

32 VWP1

29 VWPC

26 VNFO

20 VUN1

24 VVP1

21 VVPC

25 VVNC

28 VVN1

30 WPFO

22 VPFO

34 WNFO

33 VWNC

36 VWN1

K (8 PLACES) R (12 PLACES) A N D L M LMLJ J 1 2 3 4 5 6 12 11 10 9 8 7 Q ABAB AD AC YAE AB H H H Z P V W U AA 13 21 28 29 3620 F G S EC T JAF X Y B Dimensions Inches Millimeters A 6.77 172.0 B 5.90 150.0 C 5.39 137.0 D 6.38 162.0 E 4.84 123.0 F 4.33 110.0 G 3.90 99.0 H 1.97 50.0 J 0.236 6.0 K 5.5 Metric M5.5 L 0.866 22.0 M 1.10 28.0 N 0.55 14.0 P 0.945 24.0 Q 0.43 11.0 R M6 Metric M6 Dimensions Inches Millimeters S 0.217 5.5 T 0.79 20.0 U 0.08 2.0 V 0.67 17.0 W 0.62 15.8 X 0.025 Sq. Sq. 0.64 Y 0.1 Dia Dia. 2.5 Z 1.40 35.5 AA 1.44 36.6 AB 0.36 9.08 AC 0.10 2.54 AD 0.40 10.16 AE 0.127 3.22 AF 0.53 13.5 AG 0.256 6.5

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 2 Rev. 12/05 Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Characteristics Symbol PM300CLA120 Units Power Device Junction Temperature Tj -20 to 150 °C Storage Temperature Tstg -40 to 125 °C MMounting Torque, M5 Mounting Screws — 31 in-lb Mounting Torque, M6 Main Terminal Screws — 40 in-lb Module Weight (Typical) — 1250 Grams Supply Voltage, Surge (Applied between P - N) VCC(surge) 1000 Volts Self-protection Supply Voltage Limit (Short Circuit protection Capability)* VCC(prot.) 800 Volts Isolation Voltage, AC 1 minute, 60Hz Sinusoidal VISO 2500 Volts *VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) VCES 1200 Volts Collector Current (TC = 25°C) ±IC 300 Amperes Peak Collector Current (TC = 25°C) ±ICP 600 Amperes Collector Dissipation (TC = 25°C) PC 1562 Watts Control Sector Supply Voltage (Applied between VUP1-VUPC, VVP1-VVPC, VD 20 Volts VWP1-VWPC, VUN1-VUNC, VWN1-VWNC, VN1-VNC) Input Voltage (Applied between UP-VUPC, VP-VVPC, WP-VWPC, VCIN 20 Volts UN-VUNC, VN-VVNC, WN-VWNC) Fault Output Supply Voltage (Applied between UPFO-VUPC, VPFO-VVPC, VFO 20 Volts WPFO-VWPC, UNFO-VUNC, VNFO-VVNC, WNFO-VWNC) Fault Output Sink Current at UPFO, VPFO, WPFO, UNFO, VNFO, WNFO Terminals I FO 20 mA

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 3Rev. 12/05 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-Emitter Cutoff Current ICES V CE = VCES, VCIN = 15V, Tj = 25°C — — 1.0 mA V CE = VCES, VCIN = 15V, Tj = 125°C — — 10 mA Diode Forward Voltage VEC -I C = 300A, VCIN = 15V, VD = 15V — 2.8 3.9 Volts Collector-Emitter Saturation Voltage V CE(sat) V D = 15V, VCIN = 0V, IC = 300A, — 1.8 2.3 Volts Tj = 25°C VD = 15V, VCIN = 0V, IC = 300A, — 1.9 2.4 Volts Tj = 125°C Inductive Load Switching Times ton 0.5 1.0 2.5 µs trr VD = 15V, VCIN = 0 1 15V — 0.5 0.8 µs tC(on) VCC = 600V, IC = 300A — 0.4 1.0 µs toff Tj = 125°C — 2.3 3.5 µs tC(off) — 0.7 1.2 µs Control Sector Short Circuit Trip Level SC -20°C ≤ Tj ≤ 125°C, VD = 15V 600 — — Amperes Short Circuit Current Delay Time toff(SC) VD = 15V — 0.2 — µs Over Temperature Protection OT Trip Level 135 145 — °C (Detect Tj of IGBT Chip) OTR Reset Level — 125 — °C Supply Circuit Under-voltage Protection UV Trip Level 11.5 12.0 12.5 Volts (-20 ≤ Tj ≤ 125°C) UVR Reset Level — 12.5 — Volts Circuit Current ID Upper Arm VD = 15V, VCIN = 15V — 20 27 mA Lower Arm VD = 15V, VCIN = 15V — 20 27 mA Input ON Threshold Voltage Vth(on) Applied between U P-VUPC, VP-VVPC, 1.2 1.5 1.8 Volts Input OFF Threshold Voltage Vth(off) W P-VWPC, UN-VUNC, VN-VVNC, WN-VWNC 1.7 2.0 2.3 Volts Fault Output Current* IFO(H) VD = 15V, VFO = 15V — — 0.01 mA IFO(L) VD = 15V, VFO = 15V — 10 15 mA Fault Output Pulse Width* tFO VD = 15V 1.0 1.8 — ms *Fault output is given only when the internal SC, OT and UV protection of either upper or lower arms is tripped.

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 4 Rev. 12/05 Thermal Characteristics Characteristics Symbol Test Conditions Min. Typ. Max. Units Junction to Case Thermal Resistance R th(j-c)Q IGBT (Per 1/6 Module) (Note 1) — — 0.08 °C/Watt Rth(j-c)D FWDi (Per 1/6 Module) (Note 1) — — 0.13 °C/Watt Contact Thermal Resistance Rth(c-f) Case to Fin Per Module, — — 0.014 °C/Watt Thermal Grease Applied Note 1: If you use this value, Rth(f-a) should be measured just under the chips. Recommended Conditions for Use Characteristic Symbol Condition Value Units Supply Voltage VCC Applied across P-N Terminals ≤800 Volts Control Supply Voltage* VD Applied between V UP1-VUPC, VVP1-VVPC, 15.0 ± 1.5 Volts V WP1-VWPC, VUN1-VUNC, VVN1-VVNC, VWN1-VWNC Input ON Voltage VCIN(on) Applied between U P-VUPC, UN-VUNC, ≤0.8 Volts Input OFF Voltage VCIN(off) V N-VVNC, VP-VVPC, WN-VWNC, WP-VWPC ≥9.0 Volts PWM Input Frequency fPWM — ≤20 kHz Arm Shoot-through Blocking Time tDEAD Input Signal ≥3.0 µs *With ripple satisfying the following conditions: dv/dt swing ≤ ±5V/µs, Variation ≤ 2V peak to peak.

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 5Rev. 12/05 VCC = 600V VD = 15V Tj = 25oC Tj = 125oC VCC = 600V VD = 15V Tj = 25°C Tj = 125°C VCC = 600V VD = 15V Tj = 25°C Tj = 125°C COLLECTOR CURRENT, -IC, (AMPERES) REVERSE RECOVERY CURRENT, Irr, (AMPERES) REVERSE RECOVERY TIME, trr, (µs) 101 102 103 101 102 103 COLLECTOR CURRENT, -IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) SWITCHING LOSS, ESW(on), (mJ/PULSE) 101 102 103 101 102 103 SWITCHING LOSS (ON) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) COLLECTOR CURRENT, IC, (AMPERES) SWITCHING LOSS, ESW(off), (mJ/PULSE) SWITCHING LOSS (OFF) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) REVERSE RECOVERY CHARACTERISTICS (TYPICAL - INVERTER PART) EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) COLLECTOR CURRENT, -IC, (AMPERES) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL - INVERTER PART) 103 102 101 VD = 15V Tj = 25°C Tj = 125oC SUPPLY VOLTAGE, VD, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE CHARACTERISTICS (TYPICAL - INVERTER PART) 12 16 1817 IC = 300A Tj = 25oC Tj = 125oC 1514130 40032080 160 240 REVERSE RECOVERY CHARACTERISTICS (TYPICAL - INVERTER PART) COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) OUTPUT CHARACTERISTICS (TYPICAL - INVERTER PART) VD = 17V Tj = 25°C 101 102 103 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIMES, ton, (µs) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL - INVERTER PART) VD = 15V Tj = 25°C Tj = 125oC VCC = 600V VD = 15V Tj = 25°C Tj = 125°C INDUCTIVE LOAD INDUCTIVE LOAD INDUCTIVE LOAD 1.5 0.5 1.0 2.5 2.0 160 240 400 320 1.5 0.5 1.0 2.5 2.0 101 100 10-1 10-2 102 101 100 103 102 101 100 102 101 100 VCC = 600V VD = 15V Tj = 25°C Tj = 125oC INDUCTIVE LOAD

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 6 Rev. 12/05 101 102 103 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIMES, tc(on), (µs) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 101 102 103 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIMES, tc(off), (µs) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 101 102 103 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIMES, toff, (µs) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 VCC = 600V VD = 15V Tj = 25°C Tj = 125oC INDUCTIVE LOAD VCC = 600V VD = 15V Tj = 25°C Tj = 125oC INDUCTIVE LOAD VCC = 600V VD = 15V Tj = 25°C Tj = 125oC INDUCTIVE LOAD Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.08°C/W (IGBT) TIME, (s) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) 100 10-5 10-4 10-3 10-1 10-2 10-3 10-3 10-2 10-1 100 101 10-1 10-2 10-3 Zth = Rth • (NORMALIZED VALUE) Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.13°C/W (FWDi) TIME, (s) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 100 10-5 10-4 10-3 10-1 10-2 10-3 10-3 10-2 10-1 100 101 10-1 10-2 10-3 Zth = Rth • (NORMALIZED VALUE)