PM300CL1A060

PM300CL1A060 POWEREX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Intellimod™ L-Series Three Phase IGBT Inverter

300 Amperes/600 Volts

Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 03/10 Rev. 1 Description: Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: £ Complete Output Power Circuit £ Gate Drive Circuit £ Protection Logic – Short Circuit – Over Temperature Using On-chip Temperature Sensing – Under Voltage £ Low Loss Using Full Gate CSTBT™ IGBT Chip Applications: £ Inverters £ UPS £ Motion/Servo Control £ Power Supplies Ordering Information: Example: Select the complete part number from the table below -i.e. PM300CL1A060 is a 600V,

300 Ampere Intellimod™ Intelligent

Power Module. Type Current Rating VCES Amperes Volts (x 10) PM 300 60 Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 5.31 135.0 C 4.33 110.0 D 3.07 78.0±0.5 E 2.81 71 .5 F 2.62 66.5 G 1 .37 34.7 H 1 .32 33.6 K 1 .02 26.0 L 1 .59 40.5 M 0.79 20.0 N 0.65 16.5 Q 1 .19 30.15 R 0.43 11 .0 Dimensions Inches Millimeters S 0.51 13.0 T 0.16 4.0 U 0.1 Dia. Dia.2.5 V 0.02 Sq. Sq. 0.5 W M5 Metric M5 X 0.22 Dia. Dia. 5.5 Y 0.24 Rad. Rad. 6 Z 0.39 10.0 AA 0.13 3.25 AB 0.08 2.0 AC 0.24 6.05 AD 0.71 18.0 AE 0.46 11 .7 AF 0.74 18.7 AG 0.41 10.5 AH 0.85 21 .5 B K K L DM M N A S T F E Q ZAA Z Z P J R GH C V SQ. PIN (19 TYP.) X (4 PLACES) AC AC AE AG AG W (6 PLACES) Y (4 PLACES) W V 14589121319 U B N P AB 19 FO 17 VN

14 VN1

8 VVP1

2 UFO

6 VFO

5 VVPC

9 VWPC

10 WFO

12 VWP1

1 VUPC

4 VUP1

13 VNC

U (2 TYP.) AF AC AH AD VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT PU NC VWNNC VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT UNFO VNC WN VN1 VN VWPC WP WFO VWP1 VVPC VP VFO VVP1 VUPC UP UFO VUP1

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 03/10 Rev. 1 Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Characteristics Symbol PM300CL1A060 Units Power Device Junction Temperature Tj -20 to 150 °C Storage Temperature Tstg -40 to 125 °C Mounting Torque, M5 Mounting Screws — 31 in-lb Mounting Torque, M5 Main Terminal Screws — 31 in-lb Module Weight (Typical) — 800 Grams Supply Voltage, Surge (Applied between P - N) VCC(surge) 500 Volts Self-protection Supply Voltage Limit (Short Circuit protection Capability)* VCC(prot.) 400 Volts Isolation Voltage, AC 1 minute, 60Hz Sinusoidal VISO 2500 Volts IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) VCES 600 Volts Collector Current (TC = 25°C) (Note 1) ±IC 300 Amperes Peak Collector Current (TC = 25°C) ±ICP 600 Amperes Collector Dissipation (TC = 25°C) (Note 1) PC 833 Watts Control Sector Supply Voltage (Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC) VD 20 Volts Input Voltage (Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-VNC) VCIN 20 Volts Fault Output Supply Voltage VFO 20 Volts (Applied between UFO-VUPC, VFO-VVPC, WFO-VWPC, FO-VNC) Fault Output Current (UFO, VFO, WFO, FO Terminals) IFO 20 mA *VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C X Y Note 1: TC (under the chip) Measurement Point Arm UP VP WP UN VN WN Axis IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 03/10 Rev. 1 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-Emitter Saturation Voltage V CE(sat) V D = 15V, VCIN = 0V, IC = 300A, — 1 .75 2.35 Volts T j = 25°C V D = 15V, VCIN = 0V, IC = 300A, — 1 .75 2.35 Volts T j = 125°C Diode Forward Voltage VEC -I C = 300A, VCIN = 15V, VD = 15V — 1 .7 2.8 Volts Inductive Load Switching Times ton 0.3 0.8 2.0 µs t rr V D = 15V, VCIN = 0 ↔ 15V — 0.4 0.8 µs t C(on) V CC = 300V, IC = 300A — 0.4 1 .0 µs t off T j = 125°C — 1 .0 2.3 µs t C(off) — 0.3 1 .0 µs Collector-Emitter Cutoff Current ICES V CE = VCES, VD = 15V, Tj = 25°C — — 1 .0 mA V CE = VCES, VD = 15V, Tj = 125°C — — 10 mA Control Sector Circuit Current ID V D = 15V, VCIN = 15V, VN1-VNC — 6 12 mA V D = 15V, VCIN = 15V, VXP1-VXPC — 2 4 mA Input ON Threshold Voltage Vth(on) Applied between UP-VUPC, 1 .2 1 .5 1 .8 Volts Input OFF Threshold Voltage Vth(off) V P-VVPC, WP-VWPC, UN- VN- WN-VNC 1 .7 2.0 2.3 Volts Short Circuit Trip Level SC -20°C ≤ Tj ≤ 125°C, VD = 15V 600 — — Amperes Short Circuit Current Delay Time toff(SC) V D = 15V — 0.2 — µs Over Temperature Protection OT Trip Level 135 — — °C (Detect Tj of IGBT Chip) OT(hys) Reset Level — 20 — °C Supply Circuit Under-voltage Protection UV Trip Level 11 .5 12.0 12.5 Volts (-20 ≤ Tj ≤ 125°C) UVR Reset Level — 12.5 — Volts Fault Output Current* IFO(H) V D = 15V, VCIN = 15V — — 0.01 mA I FO(L) V D = 15V, VCIN = 15V — 10 15 mA Fault Output Pulse Width* tFO V D = 15V 1 .0 1 .8 — ms *Fault output is given only when the internal SC, OT and UV protections schemes of either upper or lower arm device operates to protect it.

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 03/10 Rev. 1 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Thermal Characteristics Characteristic Symbol Condition Min. Typ. Max. Units Junction to Case Thermal Resistance R th(j-c)Q IGBT (Per 1 Element) (Note 1) — — 0.15 °C/Watt R th(j-c)D FWDi (Per 1 Element) (Note 1) — — 0.23 °C/Watt Contact Thermal Resistance Rth(c-f) Case to Fin Per Module, — — 0.023 °C/Watt Thermal Grease Applied (Note 1) Recommended Conditions for Use Characteristic Symbol Condition Value Units Supply Voltage VCC Applied across P-N Terminals ≤400 Volts Control Supply Voltage* VD Applied between VUP1-VUPC, 15.0 ± 1 .5 Volts V VP1-VVPC, VWP1-VWPC, VN1-VNC Input ON Voltage VCIN(on) Applied between UP-VUPC, ≤0.8 Volts Input OFF Voltage VCIN(off) V P-VVPC, WP-VWPC, UN- VN- WN-VNC ≥9.0 Volts PWM Input Frequency fPWM — ≤20 kHz Arm Shoot-through Blocking Time tDEAD Input Signal ≥2.0 µs *With ripple satisfying the following conditions: dv/dt swing ≤ ±5V/µs, Variation ≤ 2V peak to peak.

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 03/10 Rev. 1 COLLECTOR CURRENT, -IC, (AMPERES) REVERSE RECOVERY CURRENT, Irr, (AMPERES) REVERSE RECOVERY TIME, trr, (µs) COLLECTOR CURRENT, -IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) SWITCHING LOSS, E(on), (mJ/PULSE) SWITCHING LOSS (ON) VS. COLLECTOR CURRENT (TYPICAL) COLLECTOR CURRENT, IC, (AMPERES) SWITCHING LOSS, E(off), (mJ/PULSE) SWITCHING LOSS (OFF) VS. COLLECTOR CURRENT (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) COLLECTOR RECOVERY CURRENT, -IC, (AMPERES) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) 0 2.01.51.00.5 103 102 101 100 VD = 15V Tj = 25°C Tj = 125oC SUPPLY VOLTAGE, VD, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE CHARACTERISTICS (TYPICAL) 12 16 1817 IC = 300A Tj = 25oC Tj = 125oC 1514130 350250 300150 20050 100 0 350250 300150 20050 100 REVERSE RECOVERY CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER VOLTAGE, VCE(sat), (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) OUTPUT CHARACTERISTICS (TYPICAL) VD = 17V Tj = 25°C COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) VD = 15V Tj = 25°C Tj = 125oC 1. 5 0.5 1. 0 2.0 0 350250 300150 20050 100 0 350250 300150 20050 100 150 350 250 300 200 100 2.0 1. 8 1. 2 1. 0 1. 6 1. 4 2.4 2.2 0 2.01.51.00.5 120 100 0 350250 300150 20050 100 0.6 0.5 0.4 0.2 0.3 0.1 0 350250 300150 20050 100 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C COLLECTOR RECOVERY CURRENT, -IC, (AMPERES) SWITCHING LOSS, Err, (mJ/PULSE) SWITCHING RECOVERY LOSS CHARACTERISTICS (TYPICAL)

Intellimod™ L-Series Three Phase IGBT Inverter Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 03/10 Rev. 1 TIME, (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi - TYPICAL) 101 10-110-210-3 100 101 100 10-1 10-2 Zth = Rth • (NORMALIZED VALUE) Single Pulse TC = 25°C Per Unit Base = R th(j-c) = 0.15°C/W (IGBT) R th(j-c) = 0.23°C/W (FWDi) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') 10-2 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIME, tc(on), (µs) SWITCHING TIME (ON) VS. COLLECTOR CURRENT (TYPICAL) 10-1 100 100 101 103102 10-2 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIME, tc(off), (µs) SWITCHING TIME (OFF) VS. COLLECTOR CURRENT (TYPICAL) 10-1 100 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIME, toff, (µs) SWITCHING TIME (OFF) VS. COLLECTOR CURRENT (TYPICAL) CIRCUIT FREQUENCY, fC, (kHz) CIRCUIT CURRENT, ID, (mA) CIRCUIT CURRENT VS. CIRCUIT FREQUENCY CHARACTERISTICS (N-SIDE - TYPICAL) 100 100 VD = 15V Tj = 25°C Tj = 125oC 0 20 2515105 SUPPLY CIRCUIT UNDER-VOLTAGE PROTECTION, UV/UVr, (VOLTS) -50 500 100 150 JUNCTION TEMPERATURE, Tj, (°C) TRIP LEVEL / RESET LEVEL VS. JUNCTION TEMPERATURE CHARACTERISTICS (TYPICAL) -50 500 100 150 2.0 1.6 0.4 0.8 1.2 UV UVr JUNCTION TEMPERATURE, Tj, (°C) SC (SC OF Tj = 25°C NORMALIZED 1) SHORT CIRCUIT TRIP LEVEL VS. JUNCTION TEMPERATURE CHARACTERISTICS (TYPICAL) CIRCUIT FREQUENCY, fC, (kHz) CIRCUIT CURRENT, ID, (mA) CIRCUIT CURRENT VS. CIRCUIT FREQUENCY CHARACTERISTICS (P-SIDE - TYPICAL) VD = 15V Tj = 25°C Tj = 125oC 0 20 2515105 VD = 15V 100 101 103102 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIME, ton, (µs) SWITCHING TIME (ON) VS. COLLECTOR CURRENT (TYPICAL) 100 101 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C 100 101 103102 100 101 103102 10-1 100 101 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C