PM200RL1A060

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Intellimod™ L1-Series Three Phase IGBT Inverter + Brake

200 Amperes/600 Volts

Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 11/12 Rev. 2 Description: Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: £ Complete Output Power Circuit £ Gate Drive Circuit £ Protection Logic – Short Circuit – Over Temperature Using On-chip Temperature Sensing – Under Voltage £ Low Loss Using Full Gate CSTBT ™ IGBT Chip Applications: £ Inverters £ UPS £ Motion/Servo Control £ Power Supplies Ordering Information: Example: Select the complete part number from the table below -i.e. PM200RL1A060 is a 600V,

200 Ampere Intellimod™ Intelligent

Power Module. Type Current Rating VCES Amperes Volts (x 10) PM 200 60 Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 5.31 135.0 C 4.33 110.0 D 3.07 78.0±0.5 E 2.81 71 .5 F 2.62 66.5 G 1 .37 34.7 H 1 .32 33.6 K 1 .02 26.0 L 1 .59 40.5 M 0.79 20.0 N 0.65 16.5 Q 1 .19 30.15 R 0.43 11 .0 Dimensions Inches Millimeters S 0.51 13.0 T 0.16 4.0 U 0.1 Dia. Dia.2.5 V 0.02 Sq. Sq. 0.5 W M5 Metric M5 X 0.22 Dia. Dia. 5.5 Y 0.24 Rad. Rad. 6 Z 0.39 10.0 AA 0.13 3.25 AB 0.08 2.0 AC 0.24 6.05 AD 0.71 18.0 AE 0.46 11 .7 AF 0.74 18.7 AG 0.41 10.5 AH 0.85 21 .5 B K K L DM M N A S T F E Q ZAA Z Z P J R GH C V SQ. PIN (19 TYP.) X (4 PLACES) AC AC AE AG AG W (6 PLACES) Y (4 PLACES) W V 14589121319 U B N P AB 19 FO 17 VN

14 VN1

8 VVP1

2 UFO

6 VFO

5 VVPC

9 VWPC

10 WFO

12 VWP1

1 VUPC

4 VUP1

13 VNC

U (2 TYP.) AF AC AH AD VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT PU Br VWNB VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT UNFO VNC WN VN1 VN VWPC WP WFO VWP1 VVPC VP VFO VVP1 VUPC UP UFO VUP1

Intellimod™ L1-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 11/12 Rev. 2 Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Characteristics Symbol PM200RL1A060 Units Power Device Junction Temperature Tj -20 to 150 °C Storage Temperature Tstg -40 to 125 °C Mounting Torque, M5 Mounting Screws — 31 in-lb Mounting Torque, M5 Main Terminal Screws — 31 in-lb Module Weight (Typical) — 800 Grams Supply Voltage, Surge (Applied between P - N) VCC(surge) 500 Volts Self-protection Supply Voltage Limit (Short Circuit protection Capability)* VCC(prot.) 400 Volts Isolation Voltage, AC 1 minute, 60Hz Sinusoidal VISO 2500 Volts IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) VCES 600 Volts Collector Current (TC = 25°C) (Note 1) ±IC 200 Amperes Peak Collector Current (TC = 25°C) ±ICP 400 Amperes Collector Dissipation (TC = 25°C) (Note 1) PC 625 Watts IGBT Brake Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) VCES 600 Volts Collector Current (TC = 25°C) (Note 1) ±IC 100 Amperes Peak Collector Current (TC = 25°C) ±ICP 200 Amperes Collector Dissipation (TC = 25°C) (Note 1) PC 390 Watts Diode Forward Current IF 100 Amperes Diode Rated DC Reverse Voltage (TC = 25°C) VR(DC) 600 Volts Control Sector Supply Voltage (Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC) V D 20 Volts Input Voltage (Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-Br-VNC) V CIN 20 Volts Fault Output Supply Voltage VFO 20 Volts (Applied between UFO-VUPC, VFO-VVPC, WFO-VWPC, FO-VNC) Fault Output Current (UFO, VFO, WFO, FO Terminals) I FO 20 mA *VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C Arm UP VP WP UN VN WN Br Axis IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi Note 1: TC (under the chip) Measurement Point X Y

Intellimod™ L1-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 11/12 Rev. 2 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-Emitter Saturation Voltage V CE(sat) V D = 15V, VCIN = 0V, IC = 200A, — 1 .75 2.35 Volts T j = 25°C V D = 15V, VCIN = 0V, IC = 200A, — 1 .75 2.35 Volts T j = 125°C Diode Forward Voltage VEC -I C = 200A, VCIN = 15V, VD = 15V — 1 .7 2.8 Volts Inductive Load Switching Times ton 0.3 0.8 2.0 µs t rr V D = 15V, VCIN = 0 ⇔ 15V — 0.4 0.8 µs t C(on) V CC = 300V, IC = 200A — 0.4 1 .0 µs t off T j = 125°C — 1 .0 2.3 µs t C(off) — 0.3 1 .0 µs Collector-Emitter Cutoff Current ICES V CE = VCES, VD = 15V, Tj = 25°C — — 1 .0 mA V CE = VCES, VD = 15V, Tj = 125°C — — 10 mA IGBT Brake Sector Collector-Emitter Saturation Voltage V CE(sat) V D = 15V, VCIN = 0V, IC = 100A, — 1 .75 2.35 Volts T j = 25°C V D = 15V, VCIN = 0V, IC = 100A, — 1 .75 2.35 Volts T j = 125°C Forward Voltage VFM I F = 100A — 1 .7 2.8 Volts Collector-Emitter Cutoff Current ICES V CE = VCES, VD = 15V, Tj = 25°C — — 1 .0 mA V CE = VCES, VD = 15V, Tj = 125°C — — 10 mA Control Sector Circuit Current ID V D = 15V, VCIN = 15V, VN1-VNC — 8 16 mA V D = 15V, VCIN = 15V, VXP1-VXPC — 2 4 mA Input ON Threshold Voltage Vth(on) Applied between UP-VUPC, 1 .2 1 .5 1 .8 Volts Input OFF Threshold Voltage Vth(off) V P-VVPC, WP-VWPC, UN- VN- WN-Br-VNC 1 .7 2.0 2.3 Volts Short Circuit Trip Level SC Inverter Part 400 — — Amperes (-20°C ≤ Tj ≤ 125°C, VD = 15V) Brake Part 200 — — Amperes Short Circuit Current Delay Time toff(SC) V D = 15V — 0.2 — µs Over Temperature Protection OT Trip Level 135 — — °C (Detect Tj of IGBT Chip) OT(hys) Reset Level — 20 — °C Supply Circuit Under-voltage Protection UV Trip Level 11 .5 12.0 12.5 Volts (-20 ≤ Tj ≤ 125°C) UVR Reset Level — 12.5 — Volts Fault Output Current* IFO(H) V D = 15V, VCIN = 15V — — 0.01 mA I FO(L) V D = 15V, VCIN = 15V — 10 15 mA Fault Output Pulse Width* tFO V D = 15V 1 .0 1 .8 — ms *Fault output is given only when the internal SC, OT and UV protections schemes of either upper or lower arm device operates to protect it.

Intellimod™ L1-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 11/12 Rev. 2 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristic Symbol Condition Min. Typ. Max. Units Junction to Case Thermal Resistance R th(j-c)Q IGBT (Per 1 Element) (Note 1) — — 0.20* °C/Watt Inverter Part Rth(j-c)D FWDi (Per 1 Element) (Note 1) — — 0.30* °C/Watt Junction to Case Thermal Resistance R th(j-c)Q IGBT (Note 1) — — 0.32* °C/Watt Brake Part Rth(j-c)D FWDi (Note 1) — — 0.53* °C/Watt Contact Thermal Resistance Rth(c-f) Case to Fin Per Module, — — 0.023 °C/Watt Thermal Grease Applied (Note 1) Recommended Conditions for Use Characteristic Symbol Condition Value Units Supply Voltage VCC Applied across P-N Terminals ≤400 Volts Control Supply Voltage** VD Applied between VUP1-VUPC, 15.0 ±1 .5 Volts V VP1-VVPC, VWP1-VWPC, VN1-VNC Input ON Voltage VCIN(on) Applied between UP-VUPC, ≤0.8 Volts Input OFF Voltage VCIN(off) V P-VVPC, WP-VWPC, UN- VN- WN-Br-VNC ≥9.0 Volts PWM Input Frequency fPWM — ≤20 kHz Arm Shoot-through Blocking Time tDEAD Input Signal ≥2.0 µs * If you use this value, Rth(f-a) should be measured just under the chips. ** With ripple satisfying the following conditions: dv/dt swing ≤ ±5V/µs, Variation ≤ 2V peak to peak.

Intellimod™ L1-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 11/12 Rev. 2 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C COLLECTOR RECOVERY CURRENT, -IC, (AMPERES) REVERSE RECOVERY CURRENT, Irr, (AMPERES) REVERSE RECOVERY TIME, trr, (s) 1.0 0.8 0.6 0.4 0.2 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING LOSS, Eon, (mJ/PULSE) SWITCHING LOSS (ON) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) COLLECTOR CURRENT, IC, (AMPERES) SWITCHING LOSS, Eoff, (mJ/PULSE) SWITCHING LOSS (OFF) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) REVERSE RECOVERY CHARACTERISTICS (TYPICAL - INVERTER PART) EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) COLLECTOR RECOVERY CURRENT, -IC, (AMPERES) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL - INVERTER PART) 0 2.01.51.00.5 103 102 101 100 VD = 15V Tj = 25°C Tj = 125°C COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL - INVERTER PART) 0 100 250150 200 VD = 15V Tj = 25°C Tj = 125°C 2.0 1.5 1.0 0.5 SUPPLY VOLTAGE, VD, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE CHARACTERISTICS (TYPICAL - INVERTER PART) 12 16 1817 IC = 200A Tj = 25°C 151413 2.4 2.2 2.0 1.8 1.4 1.6 1.2 1.0 REVERSE RECOVERY CHARACTERISTICS (TYPICAL - INVERTER PART) COLLECTOR-EMITTER VOLTAGE, VCE(sat), (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) OUTPUT CHARACTERISTICS (TYPICAL - INVERTER PART) 0 0.5 1.0 1.5 2.0 VD = 17V Tj = 25°C 250 100 200 150 COLLECTOR RECOVERY CURRENT, -IC, (AMPERES) SWITCHING LOSS, Err, (mJ/PULSE) SWITCHING RECOVERY LOSS CHARACTERISTICS (TYPICAL - INVERTER PART) 0 50 100 250150 200 COLLECTOR RECOVERY CURRENT, -IC, (AMPERES) 0 50 100 250150 200 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C 100 0 50 100 250150 200 0 50 100 250150 200 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C 0 50 100 250150 200 Tj = 25°C Tj = 125°C

Intellimod™ L1-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 11/12 Rev. 2 100 101 103102 10-2 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIME, tc(on), (µs) SWITCHING TIME (ON) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 10-1 100 100 101 103102 10-2 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIME, tc(off), (µs) SWITCHING TIME (OFF) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 10-1 100 100 101 103102 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIME, toff, (µs) SWITCHING TIME (OFF) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 SC (SC OF Tj = 25°C IS NORMALIZED 1) SHORT CIRCUIT TRIP LEVEL CHARACTERISTICS (TYPICAL - INVERTER PART) CIRCUIT FREQUENCY, fC, (kHz) CIRCUIT CURRENT, ID, (mA) CIRCUIT CURRENT VS. CARRIER FREQUENCY CHARACTERISTICS (N-SIDE - INVERTER PART) 0 2520155 10 CIRCUIT FREQUENCY, fC, (kHz) CIRCUIT CURRENT, ID, (mA) CIRCUIT CURRENT VS. CARRIER FREQUENCY CHARACTERISTICS (P-SIDE - INVERTER PART) 0 25 VD = 15V Tj = 25°C Tj = 125°C VD = 15V VD = 15V Tj = 25°C Tj = 125°C 20155 10 JUNCTION TEMPERATURE, Tj, (°C) SUPPLY CIRCUIT UNDER-VOLTAGE PROTECTION, UV/UVr, (VOLTS) SUPPLY CIRCUIT UNDER-VOLTAGE PROTECTION CHARACTERISTICS (TYPICAL - INVERTER PART) -50 150 UV UVr 100500 JUNCTION TEMPERATURE, Tj, (°C) -50 150100500 2.0 1.2 1.6 0.8 0.4 100 101 103102 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIME, ton, (µs) SWITCHING TIME (ON) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 TIME, (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi - INVERTER PART) 101 10-110-210-3 100 101 100 10-1 10-2 Zth = Rth • (NORMALIZED VALUE) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Single Pulse TC = 25°C Per Unit Base = R th(j-c) = 0.2°C/W (IGBT) R th(j-c) = 0.3°C/W (FWDi) VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C

Intellimod™ L1-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 11/12 Rev. 2 TIME, (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi - BRAKE PART) 101 10-110-210-3 100 101 100 10-1 10-2 Zth = Rth • (NORMALIZED VALUE) Single Pulse TC = 25°C Per Unit Base = R th(j-c) = 0.32°C/W (IGBT) R th(j-c) = 0.53°C/W (FWDi) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL - BRAKE PART) 0 120 VD = 15V Tj = 25°C Tj = 125°C 80 100604020 2.0 1.5 1.0 0.5 SUPPLY VOLTAGE, VD, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE CHARACTERISTICS (TYPICAL - BRAKE PART) 12 18 IC = 75A Tj = 25°C Tj = 125°C 16 17151413 2.4 2.0 2.2 1.6 1.8 1.4 1.2 1.0 COLLECTOR-EMITTER VOLTAGE, VCE(sat), (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR RECOVERY CURRENT, -IC, (AMPERES) OUTPUT CHARACTERISTICS (TYPICAL - BRAKE PART) 0 0.5 1.0 1.5 2.0 VD = 17V Tj = 25°C 120 100 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL - BRAKE PART) 0 2.01.51.00.5 103 102 101 100 VD = 15V Tj = 25°C Tj = 125°C