PM150RLA060

PM150RLA060 POWEREX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Intellimod™ L-Series Three Phase IGBT Inverter + Brake

150 Amperes/600 Volts

Description: Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: £ Complete Output Power Circuit £ Gate Drive Circuit £ Protection Logic – Short Circuit – Over Temperature Using On-chip Temperature Sensing – Under Voltage £ Low Loss Using 5th Generation IGBT Chip Applications: £ Inverters £ UPS £ Motion/Servo Control £ Power Supplies Ordering Information: Example: Select the complete part number from the table below -i.e. PM150RLA060 is a 600V,

150 Ampere Intellimod™ Intelligent

Power Module. Type Current Rating V CES Amperes Volts (x 10) PM 150 60 Dimensions Inches Millimeters A 4.72 120.0 B 2.17 55.0 C 0.63 16.0 D 4.17 106.0 E 0.28 7.0 F 0.78 19.75 G 2.62 66.5 H 0.13 3.25 J 0.63 16.0 K 0.08 2.0 L 0.10 2.5 M 2.81 71.5 N 0.20 5.0 P 0.43 11.0 Q 0.42 10.75 R 0.87 22.0 Dimensions Inches Millimeters S 0.46 11.75 T 0.59 15.0 U 0.91 23.0 V 0.57 14.5 W 1.26 32.0 X 1.22 31.0 Y 0.69 17.5 Z 1.14 29.0 AA 0.51 13.0 AB M5 Metric M5 AC 0.22 Dia. Dia. 5.5 AD 0.28 7.0 AE 0.08 2.0 AF 0.02 Sq. Sq. 0.5 AG 0.10 Dia. Dia. 2.5 Outline Drawing and Circuit Diagram 19 FO 17 VN

14 VN1

8 VVP1

2 UFO

6 VFO

5 VVPC

9 VWPC

10 WFO

12 VWP1

1 VUPC

4 VUP1

13 VNC

Q V Y Y W P A DE GF L H J J M J K K K K R U U U T S N B AA C Z X AB (6 PLACES) AC (2 PLACES) AE AF AG (2 PLACES) N P B U V W 1 5 9 19 VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT PU Br VWNB VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT VCC SI GND GND OUT FO IN OT UNFO VNC WN VN1 VN VWPC WP WFO VWP1 VVPC VP VFO VVP1 VUPC UP UFO VUP1

Intellimod™ L-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Characteristics Symbol PM150RLA060 Units Power Device Junction Temperature Tj -20 to 150 °C Storage Temperature Tstg -40 to 125 °C Mounting Torque, M5 Mounting Screws — 31 in-lb Mounting Torque, M5 Main Terminal Screws — 31 in-lb Module Weight (Typical) — 380 Grams Supply Voltage, Surge (Applied between P - N) VCC(surge) 550 Volts Self-protection Supply Voltage Limit (Short Circuit protection Capability)* VCC(prot.) 400 Volts Isolation Voltage, AC 1 minute, 60Hz Sinusoidal VISO 2500 Volts *VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) VCES 600 Volts Collector Current (TC = 25°C) ±IC 150 Amperes Peak Collector Current (TC = 25°C) ±ICP 300 Amperes Collector Dissipation (TC = 25°C) PC 480 Watts IGBT Brake Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) VCES 600 Volts Collector Current (TC = 25°C) ±IC 75 Amperes Peak Collector Current (TC = 25°C) ±ICP 150 Amperes Collector Dissipation (TC = 25°C) PC 300 Watts Diode Rated DC Reverse Voltage (TC = 25°C) VR(DC) 600 Volts Diode Forward Current IF 75 Amperes Control Sector Supply Voltage (Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC) V D 20 Volts Input Voltage (Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-Br-VNC) V CIN 20 Volts Fault Output Supply Voltage VFO 20 Volts (Applied between UFO-VUPC, VFO-VVPC, WFO-VWPC, FO-VNC) Fault Output Current (UFO, VFO, WFO, FO Terminals) IFO 20 mA

Intellimod™ L-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-Emitter Cutoff Current ICES V CE = VCES, VD = 15V, Tj = 25°C — — 1.0 mA VCE = VCES, VD = 15V, Tj = 125°C — — 10 mA Diode Forward Voltage VEC -I C = 150A, VCIN = 15V, VD = 15V — 2.2 3.3 Volts Collector-Emitter Saturation Voltage V CE(sat) V D = 15V, VCIN = 0V, IC = 150A, — 1.6 2.1 Volts Tj = 25°C VD = 15V, VCIN = 0V, IC = 150A, — 1.5 2.0 Volts Tj = 125°C Inductive Load Switching Times ton 0.5 1.0 2.4 µs trr VD = 15V, VCIN = 0 ⇔ 15V — 0.2 0.4 µs tC(on) VCC = 300V, IC = 150A — 0.4 1.0 µs toff Tj = 125°C — 1.2 2.5 µs tC(off) — 0.5 1.0 µs IGBT Brake Sector Collector-Emitter Cutoff Current ICES V CE = VCES, VD = 15V, Tj = 25°C — — 1.0 mA VCE = VCES, VD = 15V, Tj = 125°C — — 10 mA Diode Forward Voltage VFM IF = 75A — 2.2 3.3 Volts Collector-Emitter Saturation Voltage V CE(sat) V D = 15V, VCIN = 0V, IC = 75A, — 1.6 2.1 Volts Tj = 25°C VD = 15V, VCIN = 0V, IC = 75A, — 1.5 2.0 Volts Tj = 125°C Arm UP VP WP UN VN WN Br Axis IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi Note 2: TC (Under the Chip) Measurement Point TOP VIEW TC MEASUREMENT POINT Note 1:TC (Base Plate) Measurement Point Y BOTTOM VIEW X

Intellimod™ L-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Control Sector Short Circuit Trip Level SC Inverter Part 300 — — Amperes (-20°C ≤ Tj ≤ 125°C, VD = 15V) Brake Part 150 — — Amperes Short Circuit Current Delay Time toff(SC) VD = 15V — 0.2 — µs Over Temperature Protection OT Trip Level 135 145 155 °C (Detect Tj of IGBT Chip) OTR Reset Level — 125 — °C Supply Circuit Under-voltage Protection UV Trip Level 11.5 12.0 12.5 Volts (-20 ≤ Tj ≤ 125°C) UVR Reset Level — 12.5 — Volts Circuit Current ID VD = 15V, VCIN = 15V, VN1-VNC — 20 30 mA VD = 15V, VCIN = 15V, VXP1-VXPC — 5 10 mA Input ON Threshold Voltage Vth(on) Applied between UP-VUPC, 1.2 1.5 1.8 Volts Input OFF Threshold Voltage Vth(off) V P-VVPC, WP-VWPC, UN- VN- WN-Br-VNC 1.7 2.0 2.3 Volts Fault Output Current* IFO(H) VD = 15V, VCIN = 15V — — 0.01 mA IFO(L) VD = 15V, VCIN = 15V — 10 15 mA Fault Output Pulse Width* tFO VD = 15V 1.0 1.8 — ms *Fault output is given only when the internal SC, OT and UV protections schemes of either upper or lower devide operate to protect it. Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristic Symbol Condition Min. Typ. Max. Units Junction to Case Thermal Resistance R th(j-c)Q Inverter IGBT (Per 1/6 Module) (Note 1) — — 0.26 °C/Watt Rth(j-c)D Inverter FWDi (Per 1/6 Module) (Note 1) — — 0.43 °C/Watt Rth(j-c)Q Brake IGBT (Per 1/6 Module) (Note 1) — — 0.42 °C/Watt Rth(j-c)D Brake FWDi (Per 1/6 Module) (Note 1) — — 0.69 °C/Watt Rth(j-c)Q Inverter IGBT (Per 1/6 Module) (Note 2) — — 0.20 °C/Watt Rth(j-c)D Inverter FWDi (Per 1/6 Module) (Note 2) — — 0.33 °C/Watt Rth(j-c)Q Brake IGBT (Per 1/6 Module) (Note 2) — — 0.32 °C/Watt Rth(j-c)D Brake FWDi (Per 1/6 Module) (Note 2) — — 0.53 °C/Watt Contact Thermal Resistance Rth(c-f) Case to Fin Per Module, — — 0.038 °C/Watt Thermal Grease Applied (Note 1) Recommended Conditions for Use Characteristic Symbol Condition Value Units Supply Voltage VCC Applied across P-N Terminals ≤400 Volts Control Supply Voltage VD Applied between VUP1-VUPC, 15.0 ± 1.5 Volts VVP1-VVPC, VWP1-VWPC, VN1-VNC Input ON Voltage VCIN(on) Applied between UP-VUPC, ≤0.8 Volts Input OFF Voltage VCIN(off) V P-VVPC, WP-VWPC, UN- VN- WN-Br-VNC ≥9.0 Volts PWM Input Frequency fPWM ≤20 kHz Arm Shoot-through Blocking Time tDEAD Input Signal ≥2.0 µs With ripple satisfying the following conditions: dv/dt swing ≤ ±5V/µs, Variation ≤ 2V peak to peak.

Intellimod™ L-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25°C Tj = 125°C VCC = 300V VD = 15V Tj = 25°C Tj = 125°C EMITTER CURRENT, IE, (AMPERES) REVERSE RECOVERY CURRENT, Irr, (AMPERES) REVERSE RECOVERY TIME, trr, (µs) 102 100 101 101 100 103102 100 100 101 10-1 10-2 103102 EMITTER CURRENT, IE, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) SWITCHING LOSS, ESW(on), (mJ/PULSE) 101 100 100 101 10-1 10-2 103102 VCC = 300V VD = 15V Tj = 25°C Tj = 125°C COLLECTOR CURRENT, IC, (AMPERES) 101 100 100 101 10-1 10-2 103102 SWITCHING LOSS (ON) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) SWITCHING LOSS, ESW(off), (mJ/PULSE) SWITCHING LOSS (OFF) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) REVERSE RECOVERY CHARACTERISTICS (TYPICAL - INVERTER PART) EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) EMITTER CURRENT, IE, (AMPERES) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL - INVERTER PART) 102 101 100 VD = 15V Tj = 25°C Tj = 125°C SUPPLY VOLTAGE, VD, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE CHARACTERISTICS (TYPICAL - INVERTER PART) 12 16 1817 IC = 150A Tj = 25°C Tj = 125°C 151413 2.0 1.5 1.0 0.5 REVERSE RECOVERY CHARACTERISTICS (TYPICAL - INVERTER PART) COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) OUTPUT CHARACTERISTICS (TYPICAL - INVERTER PART) 0 0.5 1.0 1.5 2.0 VD = 17V Tj = 25oC 200 160 120 100 101 103102 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIMES, ton, (µs) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 VCC = 300V VD = 15V Tj = 25oC Tj = 125oC INDUCTIVE LOAD COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 0 120 150906030 2.0 1.5 1.0 0.5 VD = 15V Tj = 25°C Tj = 125°C

Intellimod™ L-Series Three Phase IGBT Inverter + Brake Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 TIME, (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi - INVERTER PART) 101 10-110-210-3 100 101 100 10-1 10-3 10-2 Zth = Rth • (NORMALIZED VALUE) Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.26°C/W (IGBT) Rth(j-c) = 0.43°C/W (FWDi) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') TIME, (s) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi - BRAKE PART) 101 10-110-210-3 100 101 100 10-1 10-3 10-2 Zth = Rth • (NORMALIZED VALUE) Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.42°C/W (IGBT) Rth(j-c) = 0.69 °C/W (FWDi) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIMES, tc(on), (µs) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIMES, tc(off), (µs) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 10-1 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING TIMES, toff, (µs) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 100 101 COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL - BRAKE PART) 0 80 VD = 15V Tj = 25°C Tj = 125°C 604020 2.0 1.5 1.0 0.5 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) OUTPUT CHARACTERISTICS (TYPICAL - BRAKE PART) SUPPLY VOLTAGE, VD, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE CHARACTERISTICS (TYPICAL - BRAKE PART) 12 16 1817 IC = 75A Tj = 25°C Tj = 125°C 151413 2.0 1.5 1.0 0.5 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) EMITTER CURRENT, IE, (AMPERES) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL - BRAKE PART) 102 101 10-1 100 VD = 15V Tj = 25°C Tj = 125°C 0 0.5 1.0 1.5 2.0 VD = 17V Tj = 25oC 100 100 101 103102 VCC = 300V VD = 15V Tj = 25oC Tj = 125oC INDUCTIVE LOAD 100 101 103102 VCC = 300V VD = 15V Tj = 25oC Tj = 125oC INDUCTIVE LOAD 100 101 103102 VCC = 300V VD = 15V Tj = 25oC Tj = 125oC INDUCTIVE LOAD