PLP10-130C

PLP-10 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

FEATURES

The picosecond light pulser PLP-10 is an ultrashort pulsed light source that utilizes a laser diode (LD) head. It consists of a controller and an LD head. Ten LD head types are available to accommodate various wavelengths, enabling optical output over a broad wavelength range of 375 to 1,550 nm. The PLP-10 is ideal for frequency characteristics evaluation of POF optical communications, response characteristics evaluation of a photodetector device, and an excitation light source of a fluorescence lifetime measurement system. Optical output is selectable from a window output or FC connector output. G Ultrashort pulses with FWHM of 100 ps or less G High-repetition frequency up to 100 MHz G Stable output power and oscillation timing G Easy to use and maintenance free operation G Built-in trigger delay G LED heads (optonal) Please consult with our sales office. G Frequency characteristics evaluation of POF and Gigabit Ethernet optical fiber G Pulse response measurement of high-speed photodetectors G Record evaluation of an optical recording medium G Excitation light source for fluorescence lifetime measurements HIGH-REPETITION PICOSECOND LIGHT PULSER Model PLP-10 High repetition up to 100 MHz Wavelength range from 375 to 1,550 nm

APPLICATIONS

G

18.1 86 117.4 114 14.7 9.4+2 170 ±2 232 ±1 98.5 ±16 ±2 255 ±2 304.2 ±1 28 ±2 POWER EXT.TRIG. LEVEL INTERNAL TRIGGER EXT. TRIG. (50Ω ) 80M 800K 80K 8K 800 8EXT. OPERATION FREQUENCY (Hz) X1 X1/2X1/5 OPTICAL OUTPUT SYNC. OUT. (50Ω ) SYNC.DELAY (ns) POWER ADJUST. HEAD DRIVE READY EMISSION Description Label (Sample) Parameter Unit Emission wavelength nm 405 635 650 670 780 850 1300 1550 Wavelength tolerance nm < ±10 Spectral half-width nm <10 <5 <5 <5 <5 <5 <10 <20 max. ps 100 110 100 100 100 100 100 100Pulse width typ. Beam divergence angle* θ || deg. 16 15 12 25 25 θ ⊥ 34 35 35 40 30 32 30 30 typ. 100 70 70 70 70 100 20 10 Peak min. 50 30 30 30 30 50 10 5 power typ . mW 50 30 30 30 30 50 10 5FC connector output min. 25 10 10 10 10 25 *Measured using a window output type. 70 90 70 70 70 70 70 70 Homepage Address http://www.hamamatsu.com # Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers. G Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.. G Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications and external appearance are subject to change without notice.. © 2003 Hamamatsu Photonics K.K. ISO 9001 Certificate: 09 105 79045 HAMAMATSU PHOTONICS K.K., Systems Division 812 Joko-cho, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658, E-mail: info@hamamatsu.de, United Kingdom:Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire, AL7 1BW, U.K., Telephone: (44) 1707-294888, Fax: (44) 1707-325777, E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01, E-mail: info@hamamatsu.se - Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Mois, 1/E 20020 Arese (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741, E-mail: info@hamamatsu.it Cat. No. SSCS1055E02 AUG/2003 HPK Created in Japan (PDF) New from H am am atsu DIMENSIONAL OUTLINES (Unit: mm) G M8903 Laser diode head (approx. 0.5 kg)G C8898 Controller (approx. 5.1 kg) G M8903 Laser diode head G C8898 Controller

• Repetition frequency (Hz)
• Synchronous trigger output or -500 to 700 mV / 50 Ω before or after optical output (selectable) Delay time .... t0 (reference time) ±∆ t; ∆t= 0 ns, 20 ns, 40 ns, 60 ns 80 ns 100 ns
• Ambient operating/storage humidity70% or less (non-condensing) ... PLP10-063 PLP10-063C PLP10-065 PLP10-065C PLP10-067 PLP10-067C 5 2 PLP10-078 PLP10-078C PLP10-085 PLP10-085C PLP10-130 PLP10-130C PLP10-155 PLP10-155C PLP10-041 PLP10-041C 10 11 10 Window output Output form type: window: PLP10-xxx / FC connector (for multi-mode optical fiber) : PLP10-xxxC• Note: Measured with 100MHz. The values can be changed depending on the frequency. The PLP head should be selected according to wavelength and output form and can be exchangeable with the controller C8898.

2 MHz, 1 MHz, 500 kHz, 200 kHz, 100 kHz,

50 kHz, 20 kHz, 10 kHz, 5 kHz, 2 kHz, 1 kHz,

500 Hz, 200 Hz, 100 Hz, 50 Hz, 20 Hz, 10 Hz,

5 Hz, 2 Hz

• External trigger output –4 to +4 V/50 Ω G Common specifications Hamamatsu model PLP-10 uses lasers to be classified, Class 3B. Conforming to international laser safety standards (USA:21 CFR 1040.10 CDRH, other areas: IEC Pub.825), which obligate manufacturers to provide preventive safety measures, Hamamatsu lasers are classified, and appropriate safety measures and labeling are provided. Duaring operation, users must also use their preventive safety measures according to laser- related regulations. G Labels - Window output type - - FC connector output type - 375 <±10 <10 100 * * PLP10-038 440 <±10 <10 100 PLP10-044 PLP10-044C