PL2303TA PROLIFIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

V0.1 5/9/12’ Prolific Technology Inc. 7F, #48, Sec.3, Nan-Kang Rd., Taipei, Taiwan 115, ROC Tel: 886-2-2654-6363 Fax: 886-2-2654-6161 E-mail : sales@prolific.com.tw http://www.prolific.com.tw OVERVIEW The PL2303TA is a low cost and high performance USB-to-Serial Bridge Controller. The PL2303TA provides a convenient solution for connecting an RS-232 like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL2303TA highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. The PL2303TA is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices. With very small power consumption in either operating or suspend mode, the PL2303TA is perfect for bus powered operation with plenty of power left for the attached devices. PL2303TA is Pin-to-Pin compatible with PL-2303HXA and PL-2303XA.

FEATURES

/circle6 Full Compliant with USB Specification v2.0 (Full-Speed) /circle6 On chip USB 1.1 transceiver, 5V to 3.3V regulator, and

12 MHz crystal oscillator

/circle6 Supports RS-232 like serial interface - Full-duplex transmitter and receiver (TXD and RXD) - Six MODEM control pins (RTS, CTS, DTR, DSR, DCD, and RI) - Parity error, frame error, and serial break detection - Programmable baud rate from 75 bps to 6,000,000 bps /circle6 Extensive flow control mechanism - Adjustable high/low watermark level - Automatic flow control with CTS/RTS/ XON/XOFF /circle6 Configurable 256-byte outbound buffer and 256-byte inbound buffer or 128-byte outbound buffer and 384-byte inbound buffer /circle6 Supports remote wake-up from MODEM input signals /circle6 Two general purpose I/O (GPIO) pins /circle6 Optional external EEPROM for startup device configurations /circle6 Small footprint 28-pin SSOP IC package /circle6 Pin compatible with PL-2303HXA and PL-2303XA PL2303TA USB to Serial Bridge Controller BLOCK DIAGRAM PLL Power Management ROM USB EndPoint Controller Data Buffer USB1.1 Interface 2-Wire Serial EEPROM I/F RS232 I/F Controller 12MHz USB Transceiver Regulator 5V 3.3V RS-232 Like I/F USB SIE 2-Wire EEPROM