PH965C6 FUJI | Alldatasheet
Document overview
- Manufacturer or author: DATASHEET SEARCH, DATABOOK, COMPONENT, FREE DOWNLOAD SITE
- PDF pages: 12
Technical content
ċĈěČ ĕĈĔČ ċęĈĞĕ ĊďČĊĒČċ ĈėėęĖĝČċ ċĞĎõĕĖõ Fu ji Electric Co.,Ltd. ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷þ ççççççMS5D1444 1/12 SPECIFICATION Fuji Electric Co.,Ltd. Matsumoto Factory Device Name : SILICON DIODE Type Name : PH965C6 Spec.No. : MS5D1444 đĨĵõôùÿôî÷ù đĨĵõôùÿôî÷ù đĨĵõôùÿôî÷ù
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ý Fuji Electric Co.,Ltd. ççççççMS5D1444 2/12 Revised Records Date Classi- Ind. Content Applied Drawn Checked Checked Approved fication date JUN.-1 enactment Issued K. T. -2001 date SAKURAI HOSEN JAN.-28alteration a Eadd test items Issued -2002 date
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ççç MS5D1444 3/12 1. SCOPE This specification provides the ratings and the test requirement for FUJI SILICON DIODE PH965C6 2. Application PFC circuit(current continuous mode) This diode is a product which optimizes the diode characteristic for the PFC circuit.This product is a product by which the trr characteristic was valued more than VF though there is a relation of the trade-off up to VF and Trr.The total loss of the PFC circuit can be suppressed by shortening trr. 3. OUT VIEW, MARKING, MOLDING RESIN, CHARACTERISTICS (1) Out view is shown MS5D1444 9/12 (2) Marking is shown MS5D1444 9/12 It is marked to type name or abbreviated type name, polarity and Lot No. (3) Molding resin Epoxy resin UL:V-0 (4) Characteristics is shown MS5D1444 10/12~12/12 4. RATINGS
4.1 MAXIMUM RATINGS
SYMBOL CONDITIONS RATINGS UNITS Repetitive peak reverse voltage V RRM 600 V Non-repetitive peak reverse voltage VRSM 600 V Surge peak forward current Ips tw 200ns 30 * A Peak forward current Ip 20 * A Square wave duty =1/2 Tc = 107@ Non-repetitive surge current I FSM Sine wave 10ms 1shot 25 A Operating junction temperature Tj -40~{150 °C Storage temperature T stg -40~{150 °C * Out put current of centertap full wave connection. 4.2 ELECTRICAL CHARACTERISTICS (at Ta=25 unless otherwise specified.) SYMBOL MAXIMUM UNITS Reverse recovery peak current IRP Typ. 2.0 A trr Max. 25.0 ns VF Max. 5.0 V IR Max. 50.0 µ A Rth(j-c) Max. 2.2 °C/W Rating per element
4.3 MECHANICAL CHARACTERISTICS
0.4\`0.6 N ¥m 4.9 g ITEM Average output current I 0 A7 * ITEM CONDITIONS IF = 10 A IF=0.1A,IR=0.2,Irec=0.05A Reverse current V R = VRRM IF=5A,-di/dt=200A/Ês,VR=380V Tj=100 Junction to case Forward voltage Reverse recovery time ** Thermal resistance Mounting torque Approximate mass Recommended torque
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. çççç MS5D1444 4/12 5.TEST Test Test Testing methods and Conditions Reference Sampling Acceptance No. Items Standard number number EIAJ ED4701
1 Terminal Pull force
Strength TO-220,TO-220F : 10N (Tensile) TO-3P,TO-3PF,TO-247 : 25N A-111A 5 TO-3PL : 45N method 1 T-Pack,K-Pack : 10N Force maintaining duration :30±1s
2 Terminal Load force
Strength TO-220,TO-220F : 5N (Bending) TO-3P,TO-3PF,TO-247 : 10N A-111A 5 TO-3PL : 15N method 3 T-Pack,K-Pack : 5N Number of times :2times(90deg./time)
3 Mounting Screwing torque value: (M3)
(0:1) Strength TO-220,TO-220F : 40±10N A-112 5 TO-3P,TO-3PF,TO-247 : 50±10N method 2 TO-3PL : 70±10N
4 Vibration frequency : 100Hz to 2kHz
Acceleration : 100m/s
2 A-121 5
Sweeping time : 4min./1 cycle 4times for each X,Y&Z directions.
5 Shock Peak amplitude: 15km/s 2 A-122
Duration time : 0.5ms test code D 5 3times for each X,Y&Z directions.
6 Solderability
Solder temp. : 235±5°C Immersion time : 5±0.5s A-131A Each terminal shall be immersed in test code A 5 the solder bath within 1 to 3.0mm from the body.
7 Resistance to
Solder temp. : 260±5°C Soldering Heat Immersion time : 10±1s A-132 5 Number of times : 1times Mechanical test
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ç MS5D1444 5/12 Test Test Testing methods and Conditions Reference Sampling Acceptance No. Items Standard number number EIAJ ED4701 1 High Temp. Temperature : sstg max B-111A 22 Storage Test duration : 1000h 2 Low Temp. Temperature : Tstg min B-112A 22 Storage Test duration : 1000h
3 Temperature Temperature : 85±2°C B-121A
Humidity Relative humidity : 85±5% test code C 22 Storage Test duration : 1000h
4 Temperature Temperature : 85±2°C
Humidity Relative humidity : 85±5% B-122A 22 Bias Bias Voltage : V RRM~ 0.8 test code C Test duration : 1000h
5 Unsaturated Temperature : 120±2°C (0:1)
Pressurized Relative humidity : 85±5% B-123A 22 Vapor Vapor pressure : 170kPa test code B Test duration : 96h
6 Temperature
High temp.side : Tstg max Cycle Room temp. : 5\`35 Low temp.side : Tstg min B-131A 22 Duration time : HT 30min,RT 5min LT 30min Number of cycles : 100 cycles
7 Thermal Shock Fluid : pure water(running water)
High temp.side : 100+0/-5°C B-141A 22 Low temp.side : 0+5/-0°C test code A Duration time : HT 5min,LT 5min Number of cycles : 100 cycles
8 Steady state
Ta=25±5°C Operating life Rated load D-402 22 Test duration : 1000h
9 Intermittent Tj=Tjmax \`50
Operating 3min ON, 3min OFF D-403 22 (0:1) Life Test duration : 10000cy 10 High Temp. Temperature : Ta= 100 °C Reverse Bias Bias Voltage : V R=VRRM duty=1/2 D-404 22 Test duration : 1000h Failure CriteriaIR USL x 5 USL:Upper specification Limit VF USL x 1.1 Endurance test
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ç MS5D1444 6/12 6.Cautions EAlthough Fuji Electric is continually improving product quality and reliability,a small percentage of semiconductor products may become faulty.When using Fuji Electric semiconductor products in your are requested to take adequate safety measures to prevent the equipment from causing physical injury, fire,or other problem in case any of the products fail.It is recommended to make your design fail-safe,flame retardant,and free of malfunction. EThe products described in this Specification are intended for use in the following electronic and electrical equipment which has normal reliability requirements. EComputers EOA equipment ECommunications equipment(Terminal devices) EMeasurement equipment EMachine tools EAV equipment EElectrical home appliances EPersonal equipment EIndustrial robots etc. EThe products described in this Specification are not designed or manufactured tobe used in equipment or systems used under life-threatening situations.If you are considering using these products in the equipment listed below,first check the system construction and required reliability. ETransportation equipment(automobiles,trains,ships,etc.) EBackbone network equipment ETraffic-signal control equipment EGas alarms, leakage gas auto breakers ESubmarine repeater equipment EBurglar alarms,fire alarms,emergency equipment EMedical equipment ENuclear control equipment etc. Do not use the products in this Specification for equipment requiring strict reliability such as(but not limited to): EAerospace equipment EAeronautical equipment 7.Warnings EThe Diodes should be used in products within their absolute maximaum rating(vltage, current, temperature,etc.).The Diodes may be destroyed if used beyond the rating. EThe equipment containing Diodes should have adequate fuses or protection to prevent the equipment from causing secondary destruction. EUse the Diodes within their reliability and lifetime under certain environments or conditions. The Diodes may fail before the target lifetime of your products if used under certain reliability conditions. EYou must design the Diodes to be operated within the specified maximum ratings(voltage, current,temperature,etc.)toprevent possible failure or destruction of devices. EConsider the possible temperature rise not only for the junction and case, but also for the leads. EDo not directly touch the leads or package of the Diodes while power is supplied or during operation,to avoid electric shock and burns.
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ç MS5D1444 7/12 EThe Diodes are made of incombustible material.However,if a Diode fails,it may emit smoke of flame.Also,operating the Diodes near any flammable place or material may cause the Diodes to emit smoke or flame in case the Diodes become even hotter during operation. Design the arrangement to prevent the spread of fire. EThe Diodes should not used in an environment in the presence of acid,organic matter,or corrosive gas(hydrogen sulfide,sulfurous acid gas.) EThe Diodes should not used in an irradiated field since they are not radiation-proof. Insatallation ESoldering involves temperatures which exceed the device storage temperature rating.To avoid device damage and to ensure reliability, observe the following guidelines from the quality assurance standard. ESolder temperature and duration(through-hole package) Solder Duration temperature EThe immersion depth of the lead should basically be up to the lead stopper and the distance should be a maximum of 1.5mm from the device. EWhen flow-soldering,take care to avoid immersing the package in the solder bath. ERefer to the following torque reference When mounting the device on a heat sink. Excess torque applied to the mounting screw causes damage to the device and weak torque will increase the thermal resistance, both of which conditions may destory the device. Table 1:Recommended tightening torque Package style Screw Recommended tightening torque TO-220 M3 30-50Ncm TO-220F TO-3P M3 40-60Ncm TO-3PF TO-247 TO-3PL M3 60-80Ncm EThe heat sink should have a flatness within}50Êm and roughness within 10Êm. Also,keep the tightening torque within the limits of this specification. EImproper handling may cause isolation breakdown leading to a critical accident. EWe recommend the use of thermal compound to optimize the efficiency of heat radiation.It is important to evenly apply the compound and to eliminate any air viods. Storage EThe Diodes must be stored at a standard temperature of 5 to 35 and relative humidity of 45 to 75%.If the storage area is very dry,a humidifier may be required.In such a case,use only deionized water or boiled water,since the chlorine in tap water may corrode the leads. EThe Diodes should not be subjected to rapid changes in temperature to avoid condensation on the suface of the Diodes.Therfore,store the Diodes in a place Where the temperature is steady. EThe Diodes should not be stored on top of each other,since this may cause excessive external force on the case. EThe Diodes should not be stored with the lead terminals remaining unprocessed.Rust may cause presoldered connections to go fail during later processing. EThe Diodes should be stored in antistatic containers or shipping bags.
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ç MS5D1444 8/12 8.Appendix EThese products do not contain PBDOs or PBBs. EThese products,assemblies,or components do not contain any of the above-mentioned substances. Prohibited substances: CFCs,halon,carbon tetrachloride,1,1,1-trichloroethane(metyl chloroform) These products,assemblies,or components are not manufactured using any of the above-mentioned substances. Prohibited substances: CFCs,halon,carbon tetrachloride,1,1,1-trichloroethane(methyl chloroform) EIf you have any questions about any part of this Specification, please contact Fuji Electric or its sales agentbefore using the product ENeither Fuji nor its agents shall be held liable for any injury caused by using the products not in accordance with the instructions. EThe application examples described in this specification are merely typical uses of Fuji Electric products. This specification does not confer any industrial property rights or other rights, nor constitute a license for such rights.
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ççç MS5D1444 9/12
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ççç MS5D1444 10/12 0.01 0.1 Tj=100°C Tj=25°C Tj=125°C Tj=150°C Forward Characteristic (typ.) IF Forward Current (A) VF Forward Voltage (V) ôû ôú ôù ôø ø Reverse Characteristic (typ.) Tj=25°C Tj=100°C Tj=125°C Tj=150°C IR Reverse Current (µA) VR Reverse Voltage (V) 01234 Square wave λ=180° Sine wave λ=180° Square wave λ=120° Per 1element ċĊ Square wave λ=60° Forward Power Dissipation ĞčççççčĶĹľĨĹīçėĶľĬĹçċİĺĺİķĨĻİĶĵççççïĞð Io Average Forward Current (A) 0 100 200 300 400 500 600 700 0.000 0.002 0.004 0.006 0.008 0.010 0.012 0.014 0.016 0.018 0.020 0.022 0.024 Reverse Power Dissipation α =180° DC PR Reverse Power Dissipation (W) VR Reverse Voltage (V)
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ççç MS5D1444 11/12 0123456789 1 0 100 110 120 130 140 150 160 Square wave λ=60°C Square wave λ=120°C λ:Conduction angle of forward current for each rectifier element Io:Output current of center-tap full wave connection Square wave λ=180°C Sine wave λ=180°C DC Current Derating (Io-Tc) Tc Case Temperature (°C) Io Average Output Current (A) 11 0 1 0 0 100 1000 Junction Capacitance Characteristic (typ.) Cj Junction Capacitance (pF) VR Reverse Voltage (V) 11 0 1 0 0 100 Surge Capability IFSM Peak Half - Wave Current (A) Number of Cycles at 50Hz
ċĞĎõĕĖõ ěįİĺçĴĨĻĬĹİĨijçĨĵīçĻįĬçİĵĭĶĹĴĨĻİĶĵçįĬĹĬİĵçİĺçĻįĬçķĹĶķĬĹĻŀçĶĭ čļıİçČijĬĪĻĹİĪçĊĶõóēĻīõçěįĬŀçĺįĨijijçĩĬçĵĬİĻįĬĹçĹĬķĹĶīļĪĬīóçĪĶķİĬī ó ijĬĵĻóçĶĹçīİĺĪijĶĺĬīçİĵçĨĵŀçľĨŀçľįĨĻĺĶĬĽĬĹçĭĶĹçĻįĬçļĺĬçĶĭçĨĵŀ ĻįİĹīçķĨĹĻŀçĵĶĹçļĺĬīçĭĶĹçĻįĬçĴĨĵļĭĨĪĻļĹİĵĮçķļĹķĶĺĬĺçľİĻįĶļĻ ĻįĬçĬĿķĹĬĺĺçľĹİĻĻĬĵçĪĶĵĺĬĵĻçĶĭçčļıİçČijĬĪĻĹİĪçĊĶõóēĻīõ ď÷ûô÷÷ûô÷ú Fuji Electric Co.,Ltd. ç MS5D1444 12/12 Transient Thermal Impedance Transient Thermal Impedance (°C/W) t Time (sec)