PEX10 LUMINIS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
18” 12” Ft. 4” O.D 9” Dia. Bolt circle. 11” Dia. base plate Hand hole wiring access cover Street side Specification POLESPEX All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Cast aluminum wiring access cover. - Set of 4 galvanized anchor bolts with 8 nuts and washers. - 6061 T6 alloy 6” O.D. Extruded aluminum pole with a fine surface of linear grooves to increase paint adherence and strength , with 4” O.D. x 125” thick aluminum center pole. - One-piece 1/2” thick cast aluminum base plate with pole collar adaptor and 4 reinforcing gussets. - Two piece cast aluminum base cover. - All stainless steel hardware. Model# Finish Options Mounting luminaires may be altered for design improvements or discontinued without prior notice. Standard selection WHT:Snow white BKT: Jet black BZT: Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color (Refer to color chart) L U M I IN S PEX16 16 PEX10 10 PEX12 12 PEX18 18 PEX14 14 PEX. : 6” O.D. Extruded aluminum pole PEX20 20 6”Dia. extruded aluminum poles Page 142 Accessories BNF: One banner arm factory preset in position. BNF80: Set of 2 banner arms factory preset at 180º position. Electrical FS: Fuse PH1: 120/277V photo cell PH2: 347V photo cell GFI : G.F.I . Ground fault interruption receptacle. PEX10 10 FT PEX12 12 FT PEX14 14 FT PEX : 6” O.D. Extruded aluminum pole. (E.P.A) Note Note: FS-PH1-PH2 Options are installed with pole when specified with a Luminaire. For options details and specifications, please refer to page 144 Base plate is provided with a 3 3/4” dia. opening for power entry . Galvanized anchor bolts : Set of 3/4-10 x 18” lg. anchor bolts. Note: Pole is factory extended to accommodate selected luminaire attachment. Please refer to pages 145 & 146 for poles/luminaires and attachment reference chart Ft. Ft.Ft. Please consult factory for EPA on selected luminaire.
33” Side view 4 1/2” BNR Cast aluminum 2 piece pole clamp On site installation.: Banner arm may rotate 360º around pole and and adjusted to desired height. Banner arm may be removed for storage and reinstalled as desired. Add. suffix to selected catalog pole number. BNR2 Clamp may rotate and slide along pole as desired Removable stopper disc 4” O.D. 1 1/2” Dia. 24” 2” 1 1/2” dia. aluminum tube Removable In line protection fuse, factory installed with the pole In line fuse Option: FS PH1 -120V PH2 - 277 / 347V Light photo sensor Photo electric sensor, factory installed with the pole or inside fixture when pole is not required. Option: Duplex gasketed ground fault interrupter receptacle. GFI receptacle Option: GFI Add selected option suffix code to pole catalog number luminaires may be altered for design improvements or discontinued without prior notice. Page 144 POLESL U M I IN S Options and accessories BNR - BNR2 Single or double adjustable and removable banner arm E.P.A: 0.19 (Per arm) 24” BNF: Single BNF80: Double Pre-positionned banner arm. E.P.A: 0.17 (Per arm) Banner arm tube sleeve is factory prefixed to fit with a removable banner tube support. Banner arm tube may be removed for storage and reinstalled as desired. Add. suffix BNF or BNF80 to selected catalog pole number. Side mount luminaire direction (Factory setting) BNF80 (2 banner arms at 180 deg.) BNF (Single banner arm) Street side House side Street side House side Side mount luminaire direction (Factory setting) Banner Unless otherwise specified, Banner arms are factory preset at 6” for post top. Post top Post top * BNF80 * BNF * Note: BNF banner arm is factory installed on house side position. 180º away from Luminaire side mount installation, and 6” down from post top. For other positions, BNF80 banner arms are factory installed 90º away from Luminaire side mount installation, and 6” down from post top. For other positions, Please consult factory Please consult factory Important: E.P.A. banner rating (By others) Must be compatible with selected pole and luminaire E.P.A Important: E.P.A. banner rating (By others) Must be compatible with selected pole and luminaire E.P.A