DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Type: QUANTITy: projecT: cATAlog NUmber: FIxTUre WATTAge VolTAge FINIsh opTIoN opTIoN opTIoN opTIoN LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872

260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5

19” (482) 20” (508) EPA: 0.75 SR215SR115 SR215: Full cutoff luminaire MATERIALS Scirocco is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%.. The top cast aluminum housing is designed with a hinged mechanism. The hard aluminum shade assembly is designed with a set of perimeter reinforcement ribs. The inner surface is standard white enamel for higher light efficiency. The lower optical assembly includes sealed borosilicate prismatic glass diffuser, which is secured with a silicone memory retention gasket. ELEcTRIcAL LED DRIVER 120/277V multi volt (50-60HZ) with a minimum starting temperature of -30ºC/-22ºF. Optional 347V on request. Output over voltage. Output over current and output short circuit protection with auto-recovery. Over temperature protection (110ºC). LED Standard 4000ºK LED platform included. Optional 3000ºK and 3500ºK available. Removable modular LED platform. LIFE 51,000hrs L77B50 (based on IESNA TM-21 Test Method and LM80 data). 68,000hrs L70B50 (calculated projection from LM80 data). FINISh Five-stage preparation process including preheating of cast aluminum parts for air pocket extraction, and an environmentally friendly alloy sealant. Polyester powder coating is applied through an electrostatic process and oven cured for long term finish. MOUNTING Maximum weight: 14.66lbs (6.7kg) Scirocco is designed as a modular luminaire concept offering a selection of mounting arrangements for various architectural requirements. Pole, wall or suspended attachments are proposed with high quality components to meet multiple installation conditions. cERTIFIcATION Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometry tested per IES LM-79-08 / IES LM80 test report at 25º C. Rated IP65. SR115/SR215 SERIES SCIROCCO - LED Jan 2014 Rev 0 1- Cast aluminum driver housing. 2- Universal driver tray with twist lock design. 3- Sealed and isolated LED compartment. 4- Housing/shade assembly hinge mechanism. 5- Cast aluminum LED heat dissipator. 6- Borosilicate prismatic heavy glass diffuser. 7- Cast aluminum ribbed cage. 8- Structurally reinforced perimeter aluminum shade. Inner surface is standard white enamel for increased light performance. SR115T SR215T Scirocco is designed for ease of access with a double hinge sealed mechanism isolating the light chamber from the driver compartment minimizing maintenance handling and possibly damaging components. Access to driver Access to LED source

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872 MountingELECtRiCAL ACCEssoRiEs AcA Pole mounted attachment with 45º support AcW Wall mounted attachment with 45º support APA Pole mounted shepherd arm attachment APc Pole mounted straight arm attachment APS Post top shepherd arm attachment cAT Catenary suspension attachment W Wall mounted shepherd arm attachment T Wall mount straight arm attachment STM 36” Field-cuttable stem with 45º swivel (other lengths available, please specify) SPG Silver braided power cord with adjustable suspension cable. 36” in length (other lengths on request) Sc Safety cable extends 18” over mounting plate (with stem mounting only) SSc Stabilizer cables hS House shield installed within the glass diffuser FS Fuse 2 Ph Photocell 2 347L 347V input power driver Alternate CCT ºK LED K3 3000ºK CCT LED K35 3500ºK CCT LED OPTIONS notEs 1- Luminaires are factory prewired for 120V (if no voltage is specified.) For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.) Descriptive Information Total Lms: 2656 Lumens Total Input Watts: 53 W Source: LED Total efficiency: 50% BUG Rating: B1-U0-G0 CCT: 4000ºK Outdoor report Polar graph Maximum Candela = 1101 SR115-L1W56 SR215-L1W56 TYPIcAL PhOTOMETRY SUMMARY STANDARD cOLORS WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne OPTIONAL cOLORS CS Custom color RAL RAL# color (Refer to color chart) 120V 277V Optional 347V 480V MoDEL# LED LigHt sELECtion VoLtAgE 1 FinisH SR115 SR215 LUMINAIRE SELEcTION suFFix L1W30 L1W56 inPut WAtts 26W 53W DELiVERED LuMEns 1350 2656 CRi CCt ºK 4000 ºK

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872 Ø 4” Ø 5” Ø 4” Tapered Ø 4” Height Pole PAA416 PAA516 PST16 PTA16 PSB16 16 Ft. (4,8 M) For additional pole details, please refer to separate pole specification sheet. Ø 4”= 100mm Ø5”= 127mm MATchING POLE SELEcTION 16” (406) 28” (711) 10.75” (273) 22.5” (572) 4.25” (108) Power feed 31” (787) 30” (762) 17.75” (451) ACA 1 1” X 3” extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5” dia. poles. 1/2” dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) APc 1” X 3” extruded aluminum side pole mounting straight adaptor (EPA: 0.12) APS 1 5/8” Dia. shepherd aluminum post top mount, with a cast aluminum tenon to fit with a 3 3/4” I.D. pole. (EPA: 0.15) APA 1 5/8” Dia. shepherd aluminum side pole mount. (EPA: 0.15) NOTE 1: PCA Pole with ACA and APA attachments require a 30” (762) tenon extension over pole nominal height. Factory installed. Power feed POLE MOUNT

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872 18.25” (463) 14.5” (368) 14” (356) 13.5” (343) (76) 4 . 6 2 5 ” (118) Power feed 8.5” (216) 4.25” (108) (25) 6.25” (159) 27” (686) Power feed t 1” X 3” extruded aluminum wall mounting straight adaptor with cast aluminum cover and galvanized steel mounting plate. 4 . 6 2 5 ” (118) (76) 1 7 . 7 5 ” (451) Power feed (76) 4 . 6 2 5 ” (118) Power feed 6 . 1 2 5 ” (156) WALL MOUNT cATENARY SUSPENSION cEILING PENDANT MOUNT ACW 1” X 3” extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia. X 45º standard natural stainless steel rod support. CAt Attachment includes a sealed cast aluminum connection box with (2) 1/2” sealed connectors for armored power cable (by others). Ready to accept 1/4” stainless steel suspension cable. (By others) stM 36” lg. (914) stem with 45º swivel ceiling mount Ø 5/8” (16) aluminum suspension stem. Luminaire top swivel adaptor allows to cut stem to length on site. (Mounts over a standard 4” octagonal box with 3 1/2” C/C holes) sPg 4/18 Silver braided power cable, with stainless steel adjustable cable. Standard 36” lg. (914). Other lengths available on request. ssC Set of three stabilizer cables W 1 5/8” Dia. shepherd aluminum arm wall mount, with a cast aluminum wall cover and galvanized steel mounting plate. Mounting Mounting Mounting 36” (915) STM SPG STEM SSc