DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Type: QUANTITy: projecT: cATAlog NUmber: FIxTUre WATTAge VolTAge FINIsh opTIoN opTIoN opTIoN opTIoN LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Scirocco is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. LED printed circuit board is assembled with a thick pad housing chamber designed with a heat sink pattern to optimize heat dissipation and luminaire efficacy. The driver is enclosed in a separate cast aluminum chamber accessible with a separate hinge mechanism allowing a quick access for electrical maintenance without disturbing the optical light chamber. eLectrIcaL LED POWer SUPPLY 120/277V multi volt, or 347-480V (50-60HZ) with a minimum operating temperature of -40ºC/-40ºF. LeD Type II-III-IV or VS light distribution with high performance optical lenses. Standard 4000ºK LED. LED system is available with two intensity levels. LIFe 80,000hrs (model L21W48) and 150,000hrs (model L42W60) L70B50 based on LM80 report for lumen maintenance. FINISh Five-stage preparation process including preheating of cast aluminum parts for air pocket extraction, and an environmentally friendly alloy sealant. Polyester powder coating is applied through an electrostatic process and oven cured for long term finish. MOUNtING Maximum weight: 31lbs (14.1kg) Scirocco is designed as a modular luminaire concept offering a selection of mounting arrangements for various architectural requirements. Pole, wall or suspended attachments are proposed with high quality components to meet multiple installation conditions. certIFIcatION Tested to UL1598 and CSA22.2 #250. ETL listed for wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. Rated IP65. Full cutoff luminaire 16.5” (424) 18” (457) EPA: 0.68 Sr135 SERIES SCIROCCO - LED Jan 2014 Rev 0 SR135T 1- Cast aluminum driver housing. 2- Universal driver tray with twist lock design. 3- Sealed and isolated LED compartment. 4- Housing/shade assembly hinge mechanism. 5- Sealed cast aluminum LED heat dissipator. 6- Cast aluminum shade. 7- Cast aluminum lens frame with hinge mechanism. 8- Clear tempered lens. Access to LED platform Access to driver Scirocco is designed for ease of access with a double hinge sealed mechanism isolating the light chamber from the driver compartment minimizing maintenance handling and possibly damaging components.
LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872 MountingELECtRiCAL ACCEssoRiEs aca Pole mounted attachment with 45º support acW Wall mounted attachment with 45º support aPa Pole mounted shepherd arm attachment aPc Pole mounted straight arm attachment aPS Post top shepherd arm attachment cat Catenary suspension attachment W Wall mounted shepherd arm attachment t Wall mount straight arm attachment StM 36” Field-cuttable stem with 45º swivel (other lengths available, please specify) SPG Silver braided power cord with adjustable suspension cable. 36” in length (other lengths on request) Sc Safety cable extends 18” over mounting plate (with stem mounting only) SSc Stabilizer cables LP High impact U.V. stabilized acrylic lens - 10% light loss FS Fuse 2 Ph Photocell 2 SP Surge protector 10KV 347L 347V input power driver Alternate CCT ºK LED K3L 3000ºK CCT LED K5L 5000ºK CCT LED K2a Amber LED for turtle sensitive areas. Wavelengths: 584.5 nm to 597 nm OPtIONS notEs 1- Luminaires are factory prewired for 120V (if no voltage is specified.) For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.) Refer to page 5 for additional information. StaNDarD cOLOrS WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne OPtIONaL cOLOrS CS Custom color RAL RAL# color (Refer to color chart) 120V 277V Optional 347V 480V MoDEL# LED LigHt sELECtion VoLtAgE 1 FinisH SR135 LUMINaIre SeLectION type II type III type IV type VS MoDEL L21W48-LD2 L42W60-LD2 L21W48-LD3 L42W60-LD3 L21W48-LD4 L42W60-LD4 L21W48-LD5S L42W60-LD5S inPut WAtts 46W 64W 46W 64W 46W 64W 46W 64W DELiVERED LuMEns
3092 Lms
4703 Lms
3080 Lms
4769 Lms
2892 Lms
4311 Lms
2719 Lms
4069 Lms
NOte: Above wattage values are based on 277V, tested at 25ºC ambient temperature. Wattage may vary by approx. +/- 10% for other voltages or changes in ambient temperature. Lumens output will remain constant.
LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872 Ø 4” Ø 5” Ø 4” Tapered Ø 4” Height Pole Paa416 Paa516 PSt16 Pta16 PSB16 16 Ft. (4,8 M) For additional pole details, please refer to separate pole specification sheet. Ø 4”= 100mm Ø5”= 127mm MatchING POLe SeLectION 16” (406) 28” (711)14” (355) 10.75” (273) 22.5” (572) 4.25” (108) Power feed 31” (787) 30” (762) 17.75” (451) ACA 1 1” X 3” extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5” dia. poles. 1/2” dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) aPc 1” X 3” extruded aluminum side pole mounting straight adaptor (EPA: 0.12) aPS 1 5/8” Dia. shepherd aluminum post top mount, with a cast aluminum tenon to fit with a 3 3/4” I.D. pole. (EPA: 0.15) aPa 1 5/8” Dia. shepherd aluminum side pole mount. (EPA: 0.15) NOte 1: PCA Pole with ACA and APA attachments require a 30” (762) tenon extension over pole nominal height. Factory installed. Power feed POLe MOUNt
LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872 18.25” (463) 14.5” (368) 14” (356) 13.5” (343) (76) 4 . 6 2 5 ” (118) Power feed 8.5” (216) 4.25” (108) (25) 6.25” (159) 27” (686) Power feed t 1” X 3” extruded aluminum wall mounting straight adaptor with cast aluminum cover and galvanized steel mounting plate. 4 . 6 2 5 ” (118) (76) 1 7 . 7 5 ” (451) Power feed (76) 4 . 6 2 5 ” (118) Power feed 6 . 1 2 5 ” (156) WaLL MOUNt cateNarY SUSPeNSION ceILING PeNDaNt MOUNt ACW 1” X 3” extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia. X 45º standard natural stainless steel rod support. CAt Attachment includes a sealed cast aluminum connection box with (2) 1/2” sealed connectors for armored power cable (by Others). Ready to accept 1/4” stainless steel suspension cable. (By others) stM 36” lg. (914) stem with 45º swivel ceiling mount Ø 5/8” (16) aluminum suspension stem. Luminaire top swivel adaptor allows to cut stem to length on site. (Mounts over a standard 4” octagonal box with 3 1/2” C/C holes). sPg 4/18 Silver braided power cable, with stainless steel adjustable cable. Standard 36” lg. (914). Other lengths available on request. ssC Set of three stabilizer cables W 1 5/8” Dia. shepherd aluminum arm wall mount, with a cast aluminum wall cover and galvanized steel mounting plate. Mounting Mounting Mounting 36” (915) StM SPG STEM SSc
LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. Unless specified, lamps are not included with luminaires. Toll free: 866.586.4647 Fax: 514.683.8872 90º 70º 2000 1500 50º 90º 70º 2000 3000 50º 90º 70º 1500 1000 50º 90º 70º 2000 1000 50º 90º 70º 1000 500 50º 90º 70º 50º 2000 1000 500 1000 90º 70º 50º 90º 70º 50º 1000 500 Sr135 SERIES SCIROCCO - LED Jan 2014 Rev 0 tYPIcaL PhOtOMetrY SUMMarY tYPe II tYPe III tYPe IV tYPe VS All published photometric data are executed and certified by an independent testing laboratory. Total Lms: 2892 Lumens Total Input: 46W Total Efficiency: 63% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type IV CRT: 4000ºK Sr135-L21W48-LD4 Total Lms: 4069 Lumens Total Input Watts: 64W Total Efficiency: 64% BUG Rating: B2-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type VS CRT: 4000ºK Sr135-L42W60-LD5 Total Lms: 2719 Lumens Total Input Watts: 46W Total Efficiency: 59% BUG Rating: B2-U1-G1 Cutoff Classification: Full-Cutoff Distribution: Type VS CRT: 4000ºK Sr135-L21W48-LD5 Total Lms: 3080 Lumens Total Input Watts: 46W Total Efficiency: 67% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type III CRT: 4000ºK Sr135-L21W48-LD3 Total Lms: 4769 Lumens Total Input Watts: 64W Total Efficiency: 74% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type III CRT: 4000ºK Sr135-L42W60-LD3 Total Lms: 3092 Lumens Total Input Watts: 46W Total Efficiency: 67% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type II CRT: 4000ºK Sr135-L21W48-LD2 Total Lms: 4703 Lumens Total Input Watts: 64W Total Efficiency: 74% BUG Rating: B2-U0-G2 Cutoff Classification: Full-Cutoff Distribution: Type II CRT: 4000ºK Sr135-L42W60-LD2 Total Lms: 4311 Lumens Total Input: 64W Total Efficiency: 67% BUG Rating: B1-U0-G1 Cutoff Classification: Full-Cutoff Distribution: Type IV CRT: 4000ºK Sr135-L42W60-LD4 Max. cP. 508 Max. cP. 814 Max. cP. 1622 Max. cP. 2558 Max. cP. 1346 Max. cP. 1843 Max. cP. 508 Max. cP. 1346