PE95420 PEREGRINE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
- HaRP™-Technology-Enhanced
- Eliminates Gate and Phase Lag
- No insertion loss or phase drift
- High linearity 60 dBm IIP3
- Low insertion loss:
- 0.8 dB at 100 MHz
- 1.4 dB at 3000 MHz
- 1.5 dB at 6000 MHz
- High isolation
- 65 dB at 100 MHz
- 42 dB at 3000 MHz
- 40 dB at 6000 MHz
- 1 dB compression point of +30 dBm
- Single-pin 3.3 V CMOS logic control
- ESD tolerant to 2000 V HBM
- Absorptive/Non-Reflective
- Offered in a 7-lead Hermetic CSOIC Surface-Mount Package and in DIE form
Figure 2. Package Type
- Medical
- Automotive
- Telecom Infrastructure
- Test Instrumentation
- Down-hole oil/gas
- Military
- Screening available for commercial space applications Typical Industries RF1 RF2 CTRLLS RFC 50Ω50Ω CMOS Control Driver ESD ESD VDD VSS
Table 2. Pin Descriptions Figure 3. Pin Layout (Top View)
1 RFC 1 RF Common
2 RF1 1 RF Port 1
4 LS Selects the RF1 to RFC path
5 CTRL Selects the RF2 to RFC path
3.3 V supply
7 RF2 1 RF Port 2
Note 1: No DC voltage should be applied at RF ports. Table 1. Electrical Specifications @ +25°C, VDD = 3.3 V
100 MHz, 0 dBm
3000 MHz, 0 dBm
6000 MHz, 0 dBm
8500 MHz, 0 dBm
100 MHz
3000 MHz
6000 MHz
8500 MHz
Figure 10. Evaluation Kit Schematic Figure 9. Evaluation Board Layouts of 15 mils and gap of 7 mils.
2 RF1
3 VDD
5 CTRL
6 VSS
Table 6. Ordering Information Figure 11. Package Drawing
- PACKAGE BODY MATERIAL: WHITE ALUMINA 92%
- CONDUCTOR TRACES MATERIAL: THICK FILM TUNGSTEN
- PLATING: ELECTROLYTIC GOLD 50 MICRO-INCHES MIN, OVER ELECTROLYTIC NICKEL
- ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
- TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
- ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
©2008 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0259-02 │ UltraCMOS™ RFIC Solutions Sales Offices The Americas Peregrine Semiconductor Corporation
9380 Carroll Park Drive
San Diego, CA 92121 Tel: 858-731-9400 Fax: 858-731-9499 Europe Peregrine Semiconductor Europe Bâtiment Maine 13-15 rue des Quatre Vents F-92380 Garches, France Tel: +33-1-4741-9173 Fax : +33-1-4741-9173 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice). The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS and HaRP are trademarks of Peregrine Semiconductor Corp. Hi-Rel Products Americas: Tel: 858-731-9453 Europe, Asia Pacific:
180 Rue Jean de Guiramand
13852 Aix-En-Provence Cedex 3, France
Tel: +33-4-4239-3361 Fax: +33-4-4239-7227 Peregrine Semiconductor, Asia Pacific (APAC) Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 Peregrine Semiconductor, Korea #B-2607, Kolon Tripolis, 210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-943 South Korea Tel: +82-31-728-3939 Fax: +82-31-728-3940 Peregrine Semiconductor K.K., Japan Teikoku Hotel Tower 10B-6 1-1-1 Uchisaiwai-cho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213