PE83501 PEREGRINE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
- High-frequency operation: 400 MHz to 3.5 GHz
- Fixed divide ratio of 2
- Low-power operation: 12 mA typical @ 3 V
- Small package: 8-lead MSOP
- Low cost The PE83501 is a high-performance dynamic CMOS prescaler with a fixed divide ratio of 2. Its operating frequency range is 400 MHz to 3.5 GHz. The PE83501 operates on a nominal 3 V supply and draws only 12 mA. It is packaged in a small 8-lead MSOP and is ideal for frequency scaling and microwave PLL synthesis solutions. The PE83501 is manufactured in Peregrine’s patented Ultra-Thin Silicon (UTSi) CMOS process, offering the performance of GaAs with the economy and integration of conventional CMOS. 5.05 4.75 8-lead MSOP 3.05 2.85 PREAMP DRIVER OUTPUT BUFFER D Q CLK DEC QB OFF-CHIP BYPASS Fin Fout
Copyright Peregrine Semiconductor Corp. 2003 File No. 70/0124~00B | UTSi CMOS RFIC SOLUTIONS Page 2 of 7 Figure 3. Pin Configuration Table 2. Pin Descriptions
Description
Power supply pin. Bypassing is required. Fin Input signal pin. DC blocking capacitor required (15 pF typical) DEC Power supply decoupling pin. Place a capacitor as close as possible and connect directly to the ground plane. GND Ground pin. Ground pattern on the board should be as wide as possible to reduce ground impedance. GND Ground pin. GND Ground pin. Fout Divided frequency output pin. DC blocking capacitor required (47 pF typical) GND Ground pin. Table 3. Absolute Maximum Ratings rating specified in Table 3. devices are immune to latch-up. shown in the test circuit in Figure 4. impedance. See Figure 11 for a layout example.
Figure 4. Test Circuit Block Diagram Figure 5. High Frequency System Application
8 Lead
Copyright Peregrine Semiconductor Corp. 2003 File No. 70/0124~00B | UTSi CMOS RFIC SOLUTIONS Page 6 of 7 FRONT VIEW 2.95±0.10 0.08 A B C 0.33+0.07 -0.08 0.10 A 0.10±0.05 3.00±0.10 0.86±0.08
1.10 MAX
- C - - A - 0.65BSC 0.51±0.13 2.45±0.10 0.51±0.13 3.00±0.10 .25 A B C - B - .525BSC TOP VIEW 4.90±0.15 3.00±0.10 SIDE VIEW 2.95±0.10
Figure 10. Package Drawing Table 6. Ordering Information 50 pcs. / Tube 83501-12 PE83501 PE83501-08MSOP-2000C 8-lead MSOP 2000 pcs. / T&R 83501-00 PE83501-EK PE83501-08MSOP-EK Evaluation Board 1 / Box
PEREGRINE SEMICONDUCTOR CORP. | http://www.peregrine-semi.com Copyright Peregrine Semiconductor Corp. 2003 Page 7 of 7 Sales Offices United States Peregrine Semiconductor Corp.
6175 Nancy Ridge Drive
San Diego, CA 92121 Tel 1-858-455-0660 Fax 1-858-455-0770 Japan Peregrine Semiconductor K.K. 5A-5, 5F Imperial Tower 1-1-1 Uchisiawaicho, Chiyoda-ku, Tokyo, Japan 100-011 Tel. 011-81-3-3502-5211 Fax. 011-81-3-3502-5213 Europe Peregrine Semiconductor Europe Aix-En-Provence Office Parc Club du Golf, bat 9
13856 Aix-En-Provence Cedex 3
For a list of representatives in your area, please refer to our Web site at: http://www.peregrine-semi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a PCN (Product Change Notice). The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. Peregrine products are protected under one or more of the following 5,416,043. Other patents are pending. Peregrine, the Peregrine logotype, Peregrine Semiconductor Corp., and UTSi are registered trademarks of Peregrine Semiconductor Corporation. Copyright © 2003 Peregrine Semiconductor Corp. All rights reserved.