DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Table 1. Electrical Specifications @ 25°C, VDD = 2.6V

100 MHz

100 MHz, with Ls removed

1 GHz, with Ls removed

2 GHz, with Ls removed

3 GHz, with Ls removed

3.1 GHz

100 MHz - 3 GHz -36 dBm

Notes: 1. Q for a Shunt DTC based on a Series RLC equivalent circuit. Q = X C/R = (X-XL)/R, where X = XL+XC , XL = 2*pi*f*L, XC = -1/(2*pi*f*C), which is equal to removing the effect of parasitic inductance LS.

  1. In series or shunt between 50 Ω ports. Pulsed RF input with 4620 µs period, 50% duty cycle, measured per 3GPP TS 45.005.
  2. DC path to ground at RF+ and RF- must be provided to achieve specified performance.
  3. State change activated on falling edge of SEN following data word.

1 RF- Negative RF Port 1

2 RF- Negative RF Port 1

3 DGND Ground

4 V DD Power supply pin

5 SCL Serial interface Clock input

6 SEN Serial Interface Latch Enable Input

7 SDA Serial interface Data input

8 RF+ Positive RF Port 1

9 RF+ Positive RF Port 1

10 GND RF Ground

Table 3. Operating Ranges Figure 3. Pin Configuration (Top View) Table 2. Pin Descriptions to the limits in the Operating Ranges table. Table 4. Absolute Maximum Ratings exceeding the specified rating. devices are immune to latch-up. Note 1: Pins 1-2 and 8-9 must be ti ed together on PCB for optimal performance. 4620 µS period, 50% duty cycle, measured per 3GPP TS 45.005.

  1. Node voltages defined per E quivalent Circuit Model Schematic

P, VM in Figure 18) monitored to not exceed 30 Vpk.

Figure 6. Measured Step Size vs State Figure 5. Measured Shunt S 11 (major states) Figure 7. Measured Series S 11/S22 (major states)

1000 MHz

2000 MHz

2500 MHz

Figure 8. Measured Shunt C vs Figure 9. Measured Series S 21 vs Frequency Figure 4. Measured Shunt C (@ 100 MHz) vs

Figure 18. Equivalent Circuit Model Schematic Equivalent Circuit Model Description provided for the state dependent parameters. until it reaches Self Resonant Frequency (SRF). Table 8. Equivalent Circuit Model Parameters Table 9. Equivalent Circuit Data Table 7. Maximum Operating RF Voltage

Figure 24. Tape and Reel Specifications Table 9. Ordering Information (Customer Notification Form). liability for the use of this information. Use shall be entirely at the user’s own risk. failure of the Peregrine product could create a situation in which personal injury or death might occur. of the use of its products in such applications. are the property of their respective companies. For sales and contact information please visit www.psemi.com.