PDC1040C SUPERWORLD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 18.04.2008 SMD Power Inductors (Lead Free) PDC1040C SERIES P D C 1 0 4 0 C - 1 R 0 Y F (a) (e)(f)(d) 1. PART NO. EXPRESSION : (c) Type code (b) Dimension code (e) Tolerance code : M = ±20%, Y = ±30% (a) Series code (d) Inductance code : 1R0 = 1.0uH (b) Wire : Enamelled Copper Wire (c) Adhesive : Epoxy (d) Adhesive : Epoxy 7.40 Ref. 4.0 Max. 4. MATERIALS : 3. SCHEMATIC : 10.5 Max. L A (a) Core : Ferrite Core 1.70 Ref. X 3.0±0.2 Y 1.2±0.2 7.7±0.5 3.60 Ref.155±0.2 Z 1.4±0.2 PCB Pattern CDEF GH 2. CONFIGURATION & DIMENSIONS : (f) F : Lead Free b de c a (e) Clip : Tin Clip 1R5 L G B D E F E C H Y X Y Z Unit : mm 10±0.5 B 0.7±0.2 (c)(b) A NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 18.04.2008 SMD Power Inductors (Lead Free) PDC1040C SERIES 5. GENERAL SPECIFICATION : c) Irms(A) : Will cause coil temperature to rise ǻT<40°C b) Ambient Temp. : 20°C a) Test Frequency : 100KHz/0.25Vdc 6. ELECTRICAL CHARACTERISTICS : PDC1040C-1R0YF 1.0 ±30% Part No. ( µH ) Inductance 6.5 Max. ( mȍ ) DCR 10.0 ( A ) Max. Irms e) Operating temp. : -20°C to +105°C ( include self-temp. rise ) PDC1040C-1R5YF 1.5 ±30% 8.1 9.0 PDC1040C-2R5YF 2.5 ±30% 10.5 7.0 PDC1040C-3R8YF 3.8 ±30% 13.0 5.5 PDC1040C-4R7YF 4.7 ±30% 15.3 5.4 PDC1040C-5R2YF 5.2 ±30% 22.0 5.0 PDC1040C-7R0YF 7.0 ±30% 27.0 4.5 PDC1040C-100MF 10 ±20% 35.0 4.0 d) Isat(A) : Will cause L to drop approximately 30%0 4.4 4.8 5.5 5.6 6.0 7.5 10.0 Isat Max. ( A ) 11.0 3.63.250.015 ±20%PDC1040C-150MF PDC1040C-330MF 33 ±20% 93.0 2.2 2.3 2.92.673.022 ±20%PDC1040C-220MF NOTE : Specifications subject to change without notice. Please check our website for latest information.

18.04.2008 PG. 3 SUPERWORLD ELECTRONICS (S) PTE LTD PDC1040C SERIESSMD Power Inductors (Lead Free) 7. CHARACTERISTICS CURVES : 0369 1 2 DC CURRENT(A) 0. 5 1. 5 INDUCTANCE (uH) TEMP. RISE(oC) TPC104DR-1R0PDC1040C-1R0YF 02468 1 0 DC CURRENT(A) 0.5 1.5 2.5 INDUCTANCE (uH) TEMP. RISE(oC) TPC104DR-1R5PDC1040C-1R5YF 02468 DC CURRENT(A) 0. 8 1. 6 2. 4 3. 2 INDUCTANCE (uH) TEMP. RISE(oC) TPC104DR-2R5PDC1040C-2R5YF 01 . 534 . 56 DC CURRENT(A) INDUCTANCE (uH) TEMP. RISE(oC) TPC104DR-3R8PDC1040C-3R8YF 01234567 DC CURRENT(A) INDUCTANCE(uH) TEMP. RISE( oC) TPC1 04DR -4R7 PDC1040C-4R7YF DC CURRENT(A) INDUCTANCE (uH) TEMP. RISE( oC) TPC104DR-5R2PDC1040C-5R2YF NOTE : Specifications subject to change without notice. Please check our website for latest information.

  1. CHARACTERISTICS CURVES : SMD Power Inductors (Lead Free) PDC1040C SERIES SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 18.04.2008 01 . 2 2 . 4 3 . 6 4 . 8 DC CURRENT(A) INDUCTANCE (uH) TEMP. RISE(oC) TPC104DR-7R0PDC1040C-7R0YF 012345 DC CURRENT(A) INDUCTANCE (uH) TEMP. RISE( oC) TPC104DR-100PDC1040C-100MF 0 0.9 1.8 2.7 3.6 DC CURRENT(A) INDUCTANCE (uH) TEMP. RISE(oC) TPC104DR-150PDC1040C-150MF 0 0.6 1.2 1.8 2.4 3 DC CURRENT(A) INDUCTANCE (uH) TEMP. RISE(oC) TPC104DR-220PDC1040C-220MF 00 . 511 . 522 . 5 DC C URRENT(A) INDUCTANCE(uH) TEMP. RISE( oC) TPC1 04DR-330 PDC1040C-330MF NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD 18.04.2008 PG. 5 PDC1040C SERIESSMD Power Inductors (Lead Free) 8. ELECTRICAL CHARACTERISTICS : 1. Ambient temp : 25°C0Saturation Current (Isat) Isat @ L > 70% L by step increase to the load component. 2. Applied Current : DC Current, the current shall be stepL : test inductance with DC current L : the initial inductance without DC current0 Component should be stabilized at normal condition for Within 3 Within 3 Times (min.) seconds Preheating Measure at room temperature after placing for 24 hrs. Component should be stabilized at normal condition for Component should be stabilized at normal condition for Component should be stabilized at normal condition for All electrical and mechanical parameters within tolerance 1. Ambient temp : 25°C with inhibitive ventilation condition: 2. Applied Current : DC Current, the current shall be step by step increase to the load component. Life Test 1. Appearance : No damage 2. All electrical and mechanical parameters within Drop 10 times on a concrete floor from a Idc(Irms) @ ǻ < 45°C surface temperature increase not more than 45°C scope in room temperature, the test component a. ǻT is the component surface temperature rise b. Body should not be damaged Electrical Characteristics Test Heat Rated Current (Irms) Drop height of 1m. Temperature Cycle (Thermal Shock) tolerance 24±2 hours before test. No mechanical damage +85±3 -40±3 Total : 10 cycles 25±2 25±2 Time : 500+24/-0 hrs Conditions of 1 cycle. 24±2 hours before test. Temperature (°C)Step 2. Inductance change : Within ±10% of initial value 1. Appearance : No damage 1. Appearance : No damage 2. All electrical and mechanical parameters within Humidity Resistance High Temperature Life Test Low Temperature tolerance Reliability Test Solder Heat Resistance Temperature : 40±2°C Time : 500+24/-0 hrs Temperature : 85±3°C 24±2 hours before test. Temperature : -40±3°C Humidity : 90% to 95% Applied Current : Rated Current Time : 500±12 hours 24±2 hours before test. 150°C Solder Temperature : 260±5°C Dip Time : 10±1sec. Preheat time : 1 min Preheat : 150°C 260°C 10±1 seconds Dipping Natural cooling TEST CONDITION Preheating seconds JUDGEMENT STANDARD should be covered with solder. More than 90% of the terminal electrode Mechanical Performance Test Solderability Test ITEM Solder Temperature : 245±5°C Flux for lead free : rosin Dip Time : 5±1sec. 245°C 150°C Solder : lead free (recommend) Preheat : 150°C, 60sec. cooling Natural 5±1 seconds Dipping NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6 18.04.2008 9. PACKAGING INFORMATION : 9-1. Reel Dimension SMD Power Inductors (Lead Free) PDC1040C SERIES More than 400mm Leader edge 24±0.3 More than 100mm ComponentsTrailer edge PDC1040C 10.65±0.1 Empty pockets Direction Feed 0.4±0.0511.5±0.1 G N A 1.5 W(mm) 13" x 24mm 4±0.12±0.1 Series Ao(mm) P Bo(mm) Ko(mm) Ao P(mm) 9-2 Tape Dimension / 12mm t 1.75±0.1 Ko t(mm)F(mm) W F Bo 13.5±0.5 +0.25 330 24.5±0.5 100±1.0 C G(mm)A(mm)Type C(mm) N(mm) Reflow times : 2 times max. REFLOW SOLDERING CONDITION 30sec max. 5sec max. 150~180°C 90~120sec 230°C 260°C max. 1.22 7.5 1.5 +0.25 NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD 18.04.2008 PDC1040C SERIES 9-4. Tearing Off Force The force for tearing off cover tape is 10 to 125 grams in the arrow direction under the following conditions. a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 1. Storage Conditions : To maintain the solderabililty of terminal electrodes : a) Temperature and humidity conditions : Less than 40°C and 70% RH. b) Recommended products should be used within 6 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. 2. Transportation : Application Notice Top cover tape F Base tape 165° to 180° Room Temp. (°C) 5~35 Room Humidity (%) 45~85 Tearing Speed (mm/min) 300 Room atm (hPa) 860~1060 SMD Power Inductors (Lead Free) PG. 7 Chip / Reel Inner Box Carton Size 1000 8000 2000 PDC1040C 9-3. Packaging Quantity NOTE : Specifications subject to change without notic e. Please check our website for latest information.