PDC0745C

PDC0745C SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 18.04.2008 SMD Power Inductors (Lead Free) PDC0745C SERIES P D C 0 7 4 5 C - 1 R 5 M F (a) (e)(f)(d) 1. PART NO. EXPRESSION : (c) Type code (b) Dimension code (e) Tolerance code : M = ±20% (a) Series code (d) Inductance code : 1R5 = 1.5uH (b) Wire : Enamelled Copper Wire (c) Adhesive : Epoxy (d) Adhesive : Epoxy 3.20 Ref. 4.5 Max. 4. MATERIALS : 3. SCHEMATIC : 7.0±0.5 L A (a) Core : Ferrite Core 2.10 Ref. X 1.7±0.2 Y 1.7±0.2 3.6±0.5 2.00 Ref.1.65±0.2 Z 0.6±0.2 PCB Pattern CDEF GH 2. CONFIGURATION & DIMENSIONS : (f) F : Lead Free b de c a (e) Clip : Tin Clip 3R3 L G A B D E F E C H Y X Y Z Unit : mm 7.0±0.5 B 1.15±0.2 (c)(b) NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 18.04.2008 SMD Power Inductors (Lead Free) PDC0745C SERIES 5. GENERAL SPECIFICATION : c) Irms(A) : Will cause coil temperature to rise ǻT<40°C b) Ambient Temp. : 20°C a) Test Frequency : 100KHz/0.25Vdc 6. ELECTRICAL CHARACTERISTICS : PDC0745C-1R5MF 1.5 ±20% Part No. ( µH ) Inductance 8.4100K/0.25V Frequency Test ( Hz ) ±20% ( mȍ ) DCR 6.5 ( A ) Max. Irms e) Operating temp. : -20°C to +85°C ( include self-temp. rise ) PDC0745C-3R3MF 3.3 ±20% 100K/0.25V 19 5.9 PDC0745C-4R7MF 4.7 ±20% 100K/0.25V 25 4.0 PDC0745C-5R0MF 5.0 ±20% 100K/0.25V 22 3.9 PDC0745C-100MF 10 ±20% 100K/0.25V 36 2.1 PDC0745C-150MF 15 ±20% 100K/0.25V 48 1.8 PDC0745C-220MF 22 ±20% 100K/0.25V 88 2.0 PDC0745C-330MF 33 ±20% 100K/0.25V 128 1.8 d) Isat(A) : Will cause L to drop approximately 20%0 2.0 2.5 2.1 2.7 2.9 5.0 6.0 Isat Max. ( A ) 7.0 7. CHARACTERISTICS CURVES : 0.90.8286100K/0.25V100 ±20%PDC0745C-101MF 01234567 DC CURRENT(A) 0.5 1.5 INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-1R5 PDC0745C-1R5MF 0123456 DC CURRENT(A) INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-3R3PDC0745C-3R3MF NOTE : Specifications subject to change without notice. Please check our website for latest information.

18.04.2008 PG. 3 SUPERWORLD ELECTRONICS (S) PTE LTD PDC0745C SERIESSMD Power Inductors (Lead Free) 7. CHARACTERISTICS CURVES : 012345 DC CURRENT(A) INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-4R7 PDC0745C-4R7MF 01234 DC CURRENT(A) INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-5R0 PDC0745C-5R0MF 0 0.5 1 1.5 2 2.5 3 DC CURRENT(A) 16INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-100 PDC0745C-100MF DC CURRENT(A) 20INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-150PDC0745C-150MF 00 . 511 . 522 . 53 DC CURRENT(A) INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-220 PDC0745C-220MF 0 0.5 1 1.5 2 2.5 DC CURRENT(A) 40INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-330PDC0745C-330MF 0 0.2 0.4 0.6 0.8 1 DC CURRENT(A) 120INDUCTANCE(uH) TEMP. RISE(oC) TPC0745DR-101 PDC0745C-101MF NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD 18.04.2008 PG. 4 PDC0745C SERIESSMD Power Inductors (Lead Free) 8. ELECTRICAL CHARACTERISTICS : 1. Ambient temp : 25°C0Saturation Current (Isat) Isat @ L > 70% L by step increase to the load component. 2. Applied Current : DC Current, the current shall be stepL : test inductance with DC current L : the initial inductance without DC current0 Component should be stabilized at normal condition for Within 3 Within 3 Times (min.) seconds Preheating Measure at room temperature after placing for 24 hrs. Component should be stabilized at normal condition for Component should be stabilized at normal condition for Component should be stabilized at normal condition for All electrical and mechanical parameters within tolerance 1. Ambient temp : 25°C with inhibitive ventilation condition: 2. Applied Current : DC Current, the current shall be step by step increase to the load component. Life Test 1. Appearance : No damage 2. All electrical and mechanical parameters within Drop 10 times on a concrete floor from a Idc(Irms) @ ǻ < 45°C surface temperature increase not more than 45°C scope in room temperature, the test component a. ǻT is the component surface temperature rise b. Body should not be damaged Electrical Characteristics Test Heat Rated Current (Irms) Drop height of 1m. Temperature Cycle (Thermal Shock) tolerance 24±2 hours before test. No mechanical damage +85±3 -40±3 Total : 10 cycles 25±2 25±2 Time : 500+24/-0 hrs Conditions of 1 cycle. 24±2 hours before test. Temperature (°C)Step 2. Inductance change : Within ±10% of initial value 1. Appearance : No damage 1. Appearance : No damage 2. All electrical and mechanical parameters within Humidity Resistance High Temperature Life Test Low Temperature tolerance Reliability Test Solder Heat Resistance Temperature : 40±2°C Time : 500+24/-0 hrs Temperature : 85±3°C 24±2 hours before test. Temperature : -40±3°C Humidity : 90% to 95% Applied Current : Rated Current Time : 500±12 hours 24±2 hours before test. 150°C Solder Temperature : 260±5°C Dip Time : 10±1sec. Preheat time : 1 min Preheat : 150°C 260°C 10±1 seconds Dipping Natural cooling TEST CONDITION Preheating seconds JUDGEMENT STANDARD should be covered with solder. More than 90% of the terminal electrode Mechanical Performance Test Solderability Test ITEM Solder Temperature : 245±5°C Flux for lead free : rosin Dip Time : 5±1sec. 245°C 150°C Solder : lead free (recommend) Preheat : 150°C, 60sec. cooling Natural 5±1 seconds Dipping NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 18.04.2008 9. PACKAGING INFORMATION : 9-1. Reel Dimension SMD Power Inductors (Lead Free) PDC0745C SERIES More than 400mm Leader edge 24±0.3 More than 100mm ComponentsTrailer edge PDC0745C 7.65±0.1 Empty pockets Direction Feed 0.4±0.0511.5±0.1 G N A 1.5 W(mm) 13" x 24mm 4±0.12±0.1 Series Ao(mm) P Bo(mm) Ko(mm) Ao P(mm) 9-2 Tape Dimension / 12mm t 1.75±0.1 Ko t(mm)F(mm) W F Bo 13.5±0.5 +0.25 330 24.5±0.5 100±1.0 C G(mm)A(mm)Type C(mm) N(mm) Reflow times : 2 times max. REFLOW SOLDERING CONDITION 30sec max. 5sec max. 150~180°C 90~120sec 230°C 260°C max. 1.22 7.5 1.5 +0.25 NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD 18.04.2008 PDC0745C SERIES 9-4. Tearing Off Force The force for tearing off cover tape is 10 to 125 grams in the arrow direction under the following conditions. a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 1. Storage Conditions : To maintain the solderabililty of terminal electrodes : a) Temperature and humidity conditions : Less than 40°C and 70% RH. b) Recommended products should be used within 6 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. 2. Transportation : Application Notice Top cover tape F Base tape 165° to 180° Room Temp. (°C) 5~35 Room Humidity (%) 45~85 Tearing Speed (mm/min) 300 Room atm (hPa) 860~1060 SMD Power Inductors (Lead Free) PG. 6 Chip / Reel Inner Box Carton Size 1000 8000 2000 PDC0745C 9-3. Packaging Quantity NOTE : Specifications subject to change without notic e. Please check our website for latest information.