PDB-C160SM

PDB-C160SM LUNA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Photodiode in Plastic Surface Mount Package PDB-C160SM WWW.LUNAINC.COM Precision – Control – Results Information in this technical data sheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Page 1/3 REV 04-20-17 © 2016 Luna Optoelectronics. All rights reserved. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 DESCRIPTION FEATURES The PDB-C160SM is a red enhanced PIN silicon photodiode ideal for high speed photoconductive applications packaged in a surface mount package.  Surface Mount  Photoconductive  High Speed  Low cost RELIABILITY APPLICATIONS Contact Luna for recommendations on specific test conditions and procedures.  Photointerrupters  Industrial Electronics  IR Remote Control  Control & Drive Circuits ABSOLUTE MAXIMUM RATINGS SYMBOL MIN MAX UNITS Reverse Voltage - - 32 V Ta = 25°C UNLESS OTHERWISE NOTED Storage Temperature -40 - +100 °C - Operating Temperature -40 to +100 °C - Soldering Temperature* - - +260 °C - * 1/16 inch from case for 3 seconds max.

Photodiode in Plastic Surface Mount Package PDB-C160SM WWW.LUNAINC.COM Precision – Control – Results Information in this technical data sheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Page 2/3 REV 04-20-17 © 2016 Luna Optoelectronics. All rights reserved. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 OPTO-ELECTRICAL PARAMETERS Ta = 25°C UNLESS NOTED OTHERWISE PARAMETER TEST CONDITIONS MIN TYP MAX UNITS Short Circuit Current H= 100 fc, 2856 K - 80 95 µA Dark Current VR = 10 V - 2 30 nA Shunt Resistance VR = 10 mV - 250 - MW Junction Capacitance VR =0V; f = 1 MHz - 72 - pF Spectral Application Range Spot Scan 400 - 1100 nm Peak Wave Length  = 850nm - .62 - A/W Noise Equivalent Power VR =10V@= Peak - 4.1x10-14 - W/ √ Hz Response Time RL = 50Ω, VR = 5V,  = 850nm,  - 20 - nS Response time of 10% to 90% is specified at 850nm wavelength light. SOLDERING RECOMMENDATION Wave Not Advised IR Oven Reflow Recommended See reflow profile. Forced Convection Reflow Recommended See reflow profile. Convection Reflow Recommended See reflow profile. Vapor Phase Reflow Recommended See reflow profile. Manual Allowed 260°C for 3 seconds max. Moisture Sensitivity Level 4 J-STD-033 TYPICAL PERFORMANCE SPECTRAL RESPONSE SOLDER PAD LAYOUT 1.45 1.00 1.45 1.80 5.90 SOLDER PAD LAYOUT, mm A C

Photodiode in Plastic Surface Mount Package PDB-C160SM WWW.LUNAINC.COM Precision – Control – Results Information in this technical data sheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Page 3/3 REV 04-20-17 © 2016 Luna Optoelectronics. All rights reserved. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 REFLOW PROFILE 1.E-09 1.E-08 1.E-07 1.E-06 1.E-05 Noise Voltage [Vrms/Hz1/2] Frequency [kHz]