PC8N-5LTE

PC8N-5LTX ELITE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

Features

• High flux per LED
• Various colors
• Good color uniformity
• Low-temp. & lead free reflow soldering
• Industry’s first lighting-class LED
• Low Voltage DC operated
• Instant light (less than 100ns)
• No UV
• Superior ESD protection
• Multi - Color In One Package Typical Applications
• Reading lights (car, bus, aircraft)
• Portable (flashlight, bicycle)
• Uplighters/Downlighters
• Decorative/Entertainment
• Bollards/Security/Garden
• Cove/Undershelf/Task
• Indoor/Outdoor Commercial and Residential Architectural
• Automotive Ext (Stop-Tail-Turn, CHMSL, Mirror Side Repeat)
• LCD backlights/Stage/Studio lighting Introduction ‧ProLight Hornet Colorful series is a color changeable LED with maximum 4 color chips in one package. Compared to prior RGB in one package, Hornet-series is especial able to provide the “White” color independently. It’s creating a small optical source for excellent optical control and efficient color mixing. ProLight Hornet Colorful series is much suitable for the application of color- changing lighting, indoor cove lighting, and entertainment lighting.

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Emitter Mechanical Dimensions Notes: 1. The cathode side of the device is denoted by the chamfer on the part body. 2. Electrical insulation between the case and the board is required --- slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 3. Drawing not to scale. 4. All dimensions are in millimeters. 5. All dimensions without tolerances are for reference only. 6. Please do not solder the emitter by manual hand soldering, otherwise it will damage the emitter. 7. Please do not use a force of over 3kgf impact or pressure on the lens of the LED, otherwise it will cause a catastrophic failure. *The appearance and specifications of the product may be modified for improvement without notice.

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Star Mechanical Dimensions Notes: 1. Slots in aluminum-core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Drawing not to scale. 4. All dimensions are in millimeters. 5. All dimendions without tolerances are for reference only. 6. Please do not use a force of over 3kgf impact or pressure on the lens of the LED, otherwise it will cause a catastrophic failure. *The appearance and specifications of the product may be modified for improvement without notice.

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Optical Characteristics at 350mA, TJ = 25°C Total Dominant Wavelength λD, included Viewing or Color Temperature CCT Angle Angle Radiation Color (degrees) (degrees) Pattern Min. Typ. Max. θ0.90V 2 θ1/2 Lambertian White 3710 K 3985 K 4260 K 160 140

6020 K 6535 K 7050 K 160 140

Green 520 nm 525 nm 530 nm 160 140 Blue 460 nm 462.5 nm 465 nm 160 140 Red 620.5 nm 623 nm 631 nm 160 140

• ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
• ProLight maintains a tolerance of ± 5% for CCT measurements. Thermal Resistance Forward Voltage VF (V) Junction to Color Min. Typ. Max. Slug (°C/ W) White 2.8 3.5 4.0 3Green 2.8 3.5 4.0 Blue 2.8 3.5 4.0 Red 1.9 2.2 3.1 Radiation Color Part Number Lumious Flux ΦV (lm) Pattern Emitter Star Minimum Typical Lambertian White PC8N-5LTE PC8N-5LTS 63 82 Green 46 60 Blue 11.5 15 Red 24.5 32
• ProLight maintains a tolerance of ± 10% on flux and power measurements.
• Please do not drive at rated current more than 1 second without proper heat sink. Flux Characteristics at 350mA, TJ = 25°C Electrical Characteristics at 350mA, TJ = 25°C

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Absolute Maximum Ratings Parameter White/Green/Blue/Red DC Forward Current (mA) 350 Peak Pulsed Forward Current (mA) 500 Average Forward Current (mA) 350 ESD Sensitivity > ±500V (HBM per MIL-STD-883E Method 3015.7) LED Junction Temperature (°C) 120 Aluminum-core PCB Temperature (°C) 90 Storage & Operating Temperature (°C) -40 to +90 Soldering Temperature(°C) 260°C

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 y x 7050 K 6020 K 5310 K 4745 K 4260 K 3710 K 3220 K 2870 K 2580 K Planckian (BBL) Color Bin White Binning Structure Graphical Representation White Bin Structure Bin Code x y Typ. CCT (K) Bin Code x y Typ. CCT (K) 0.401 0.404 4000 X0 0.321 0.348 65000.374 0.387 0.303 0.330 0.367 0.358 0.307 0.311 0.390 0.372 0.322 0.326

• Tolerance on each color bin (x , y) is ± 0.01

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Color Spectrum, TJ = 25°C 1. White 0.0 0.2 0.4 0.6 0.8 1.0 350 400 450 500 550 600 650 700 750 800 850 Relative Spectral Power Distribution Wavelength(nm) Standard Eye Response Cruve White 2. Blue、Green、Red 0.0 0.2 0.4 0.6 0.8 1.0 400 450 500 550 600 650 700 Relative Spectral Power Distribution Wavelength(nm) Blue Green Red

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Light Output Characteristics Relative Light Output vs. Junction Temperature at 350mA 100 120 140 160 1 2 3 4 5 6 7 8 Relative Light Output (%) Junction Temperature, TJ (℃) White Green Blue -20 0 20 40 60 80 100 120 100 120 140 160 1 2 3 4 5 6 7 8 Relative Light Output (%) Junction Temperature, TJ (℃) Red -20 0 20 40 60 80 100 120

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Forward Current Characteristics, TJ = 25°C 1. Forward Voltage vs. Forward Current 100 150 200 250 300 350 400 0 0.5 1 1.5 2 2.5 3 Average Forward Current (mA) Forward Voltage (V) 100 150 200 250 300 350 400 0 0.5 1 1.5 2 2.5 3 3.5 4 Average Forward Current (mA) Forward Voltage (V) RedWhite, Green, Blue 2. Forward Current vs. Normalized Relative Luminous Flux 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 100 200 300 400 Relative Luminous Flux Forward Current (mA) White, Green, Blue 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 100 200 300 400 Relative Luminous Flux Forward Current (mA) Red

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com 100 -100 -80 -60 -40 -20 0 20 40 60 80 100 Relative Intensity (%) Angular Displacement (Degrees) Typical Representative Spatial Radiation Pattern Lambertian Radiation Pattern

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Soak Requirements Level Floor Life Standard Accelerated Environment Time Conditions Time (hours) Conditions Time (hours) Conditions

1 Unlimited ≤30°C / 168 +5/-0 85°C / NA NA85% RH 85% RH

• The standard soak time includes a default value of 24 hours for semiconductor manufature's exposure time (MET) between bake and bag and includes the maximum time allowed out of the bag at the distributor's facility.
• Table below presents the moisture sensitivity level definitions per IPC/JEDEC's J-STD-020C. Soak Requirements Level Floor Life Standard Accelerated Environment Time Conditions Time (hours) Conditions Time (hours) Conditions

2 1 year ≤30°C / 168 +5/-0 85°C / NA NA60% RH 60% RH 2a 4 weeks ≤30°C / 696 +5/-0 30°C / 120 +1/-0 60°C / 60% RH 60% RH 60% RH 3 168 hours ≤30°C / 192 +5/-0 30°C / 40 +1/-0 60°C / 60% RH 60% RH 60% RH 60% RH 60% RH 60% RH 60% RH 60% RH 60% RH 60% RH 60% RH 60% RH

6 Time on Label ≤30°C / Time on Label 30°C / NA NA(TOL) 60% RH (TOL) 60% RH

Moisture Sensitivity Level - JEDEC 1

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Stress Test Stress Conditions Stress Duration Failure Criteria Room Temperature 25°C, IF = max DC (Note 1) 1000 hours Note 2Operating Life (RTOL) Wet High Temperature 85°C/60%RH, IF = max DC (Note 1) 1000 hours Note 2Operating Life (WHTOL) Wet High Temperature 85°C/85%RH, non-operating 1000 hours Note 2Storage Life (WHTSL) High Temperature 110°C, non-operating 1000 hours Note 2Storage Life (HTSL) Low Temperature -40°C, non-operating 1000 hours Note 2Storage Life (LTSL) Non-operating -40°C to 120°C, 30 min. dwell, 200 cycles Note 2Temperature Cycle (TMCL) <5 min. transfer Non-operating -40°C to 120°C, 20 min. dwell, 200 cycles Note 2Thermal Shock (TMSK) <20 sec. transfer Mechanical Shock 1500 G, 0.5 msec. pulse, Note 35 shocks each 6 axis Natural Drop On concrete from 1.2 m, 3X Note 3 Variable Vibration 10-2000-10 Hz, log or linear sweep rate, Note 3Frequency 20 G about 1 min., 1.5 mm, 3X/axis Solder Heat Resistance 260°C ± 5°C, 10 sec. Note 3(SHR) Solderability Steam age for 16 hrs., then solder dip Solder coverage at 260°C for 5 sec. on lead Notes: 1. Depending on the maximum derating curve. 2. Criteria for judging failure Item Test Condition Criteria for Judgement Min. Max. Forward Voltage (VF) IF = max DC -- Initial Level x 1.1 Luminous Flux or IF = max DC Initial Level x 0.7 --Radiometric Power (ΦV) Reverse Current (IR) VR = 5V -- 50 μA * The test is performed after the LED is cooled down to the room temperature. 3. A failure is an LED that is open or shorted. Qualification Reliability Testing

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com TYPE A. Recommended Solder Pad Design Standard Emitter

• All dimensions are in millimeters.
• Electrical isolation is required between Slug and Solder Pad. TYPE B.

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Reflow Soldering Condition Profile Feature Sn-Pb Eutectic Assembly Low-Temp. & Pb-Free Assembly (58Bi-42Sn Eutectic Alloy) Preheat & Soak Temperature min (Tsmin) 100 °C 90 °C Temperature max (Tsmax) 150 °C 120 °C Time (Tsmin to Tsmax) 60-120 seconds 60-120 seconds Average Ramp-Up Rate (Tsmax to TP) 3 °C / second max. 2 °C / second max. Liquidous temperature (TL) 183°C 138°C Time at liquidous (tL) 60-150 seconds 20-50 seconds Peak package body temperature (TP) 235°C 185°C Time (tP) within 5°C of the specified 20 seconds 20 secondsclassification temperature (TC) Average ramp-down rate (TP to Tsmax) 6 °C/second max. 3 °C/second max. Time 25°C to Peak Temperature 6 minutes max. 4 minutes max.

• All temperatures refer to topside of the package, measured on the package body surface.
• Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a heat plate should be used. It should be confirmed beforehand whether the characteristics of LEDs will or will not be damaged by repairing.
• Reflow soldering should not be done more than two times.
• When soldering, do not put stress on the LEDs during heating.
• After soldering, do not warp the circuit board.

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Place Solder Wire to the solder pad of MCPCB. Heat Plate Soldering Condition (1) Soldering Process for Solder Paste

• Heat plate temperature: 260°C max for Lead Solder and 260°C max for Lead-Free Solder.
• When soldering, do not put stress on the LEDs during heating.
• After soldering, do not warp the circuit board. (2) Soldering Process for Solder Wire Put MCPCB on Heat Plate until Solder Paste melt. The Solder Paste sould be melted within 10 seconds. Take out MCPCB out from Heat Plate within 15 seconds. Put Emitter on MCPCB. Take the MCPCB out From Heat Plate within 10 seconds. Heat Plate Place Emitter on MCPCB. Use Solder Mask to print Solder Paste on MCPCB. Put MCPCB on Heat Plate. Heat Plate Emitter MCPCB Solder Paste MCPCB Heat Plate Heat Plate Solder Wire Emitter

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Emitter Reel Packaging Notes: 1. Drawing not to scale. 2. All dimensions are in millimeters. 3. General tolerance is ±0.10 mm.

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Emitter Reel Packaging Notes: 1. Empty component pockets sealed with top cover tape. 2. 250 or 500 pieces per reel. 3. Drawing not to scale. 4. All dimensions are in millimeters. 178 ± 1 3 ± 0.5 4 ± 0.5 5 ± 0.5 60 ± 0.5 13.2 ± 0.5 16.2 ± 0.5 Φ 13.1 ± 0.5 Φ 21 ± 0.5 17.0 ±0.5 19.5 ±1.0

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Star Tube Packaging Notes: 1. 20 pieces per tube. 2. Drawing not to scale. 3. All dimensions are in millimeters. 4. All dimendions without tolerances are for reference only. **Please do not open the moisture barrier bag (MBB) more than one week. This may cause the leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less than 40% RH.

We Provide the Light to the world 3F No.12, Kung-Yeh 10th Rd., Ping Chen Industrial Zone, Ping Chen, 324, Taoyuan Hsien, Taiwan, R.O.C. Tel ：886-3-419-2099 Fax ：886-3-419-2377 www.prolightopto.com Precaution for Use

• Storage Please do not open the moisture barrier bag (MBB) more than one week. This may cause the leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less than 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.
• The slug is is not electrically neutral. Therefore, we recommend to isolate the heat sink.
• The slug is to be soldered. If not, please use the heat conductive adhesive.
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering.
• Please avoid rapid cooling after soldering.
• Components should not be mounted on warped direction of PCB.
• Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a heat plate should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
• This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When cleaning is required, isopropyl alcohol should be used.
• When the LEDs are illuminating, operating current should be decide after considering the package maximum temperature.
• The appearance, specifications and flux bin of the product may be modified for improvement without notice. Please refer to the below website for the latest datasheets. http://www.prolightopto.com/ Handling of Silicone Lens LEDs Notes for handling of silicone lens LEDs
• Please do not use a force of over 3kgf impact or pressure on the silicone lens, otherwise it will cause a catastrophic failure.
• The LEDs should only be picked up by making contact with the sides of the LED body.
• Avoid touching the silicone lens especially by sharp tools such as Tweezers.
• Avoid leaving fingerprints on the silicone lens.
• Please store the LEDs away from dusty areas or seal the product against dust.
• When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the silicone lens must be prevented.
• Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)