PAB2CA-2C-01 ELITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

SQUARE, SUPER FLUX TYPE LED Elite Enterprises (H.K.) Co., Ltd. Square, Super Fluxl Type Flat 2505, 25/F., Nanyang Plaza, 57 Hung To Road, Kwun Tong, H.K. Tel: (852) 2723-3122 Fax: (852) 2723-3990 Email: info@elite-ent.com.hk Features Package Dimensions z High intensity z Wide viewing angle z General purpose leads z Reliable and rugged Absolute Maximum Ratings at Ta=25℃ Parameter Max. Unit Power Dissipation 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA Continuous Forward Current 20 mA Derating Linear From 50℃ 0.4 mA / ℃ Reverse Voltage 5 V Operating Temperature Range -25 ℃ to +80 ℃ Storage Temperature Range -40 ℃ to +80 ℃ Lead Soldering Temperature [4mm(.157”) From Body] 260℃ for 5 Seconds Notes: 1. All dimensions are in millimeters (inches). 2. Protruded resin under flange is 1.0mm (.04”) max. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Part No. Emitting Color Lens Color Peak Wavelength λp (nm) Vf (V) If = 20mA (Note E1) Iv (mcd) (Note E2) Viewing Angle 2θ1/2 (Deg) (Note E3) Typ Max Min Typ PAB2CA-2C-01 Blue Water Clear 468 3.7 – 4.0 269 – 350 100 PAB2CA-3C-01-S Blue Water Clear 468 3.2 – 4.0 231 – 300 100 PAB2CF-3D-01 Blue Water Clear 468 3.2 – 4.0 154 – 200 100 PAG7CA-1B-01 Green Water Clear 528 3.2 – 4.0 480 – 680 100 PAY2CA-3B-01 Yellow Water Clear 590 1.9 – 2.4 300 – 400 100 PAV4CA-1B-04 Red Water Clear 630 2.25 – 2.6 2308 – 3000 100 PAV1CA-3B-02-S Red Water Clear 625 1.8 – 2.4 615 – 800 100 PAV1CA-3B-01 Red Water Clear 625 1.8 – 2.4 462 – 600 100 Parameter Test Condition Luminous Intensity I f = 20mA (Note E1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.) Dominant Wavelength I f = 20mA (Note E2: The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.) Peak Emission Wavelength I f = 20mA Viewing Angle (Note E3. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.) Spectral Line Half-Width I f = 20mA Forward Voltage I f = 20mA Reverse Current I f = 20mA „ Unit: mm (inches) „ Tolerance: ±0.25mm (.010”) max