PC814X SHARP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Dept.,11 Opto-Electronic Devices Div. ELECOM Group SHARP CORPORATION T. Matsumura, Department General Manager of Engineering PL“7 3. Please contact and consult with a Sharp sales representative for any questions about this product. CUSTOMER’S APPROVAL DATE BY DATE PRESENTED BY (4) Please contact and consult with a Sharp sales representative if there are any questions regarding interpretation of the above three paragraphs. - Medical equipment 1* Nuclear power control equipment - Telecommunication equipment (for trunk lines)- Space equipment (3) Please do not use this product for equipment which require extremely high reliability and safety in function and precision, such as - Other safety equipment 1 * Rescue and security equipment* Gas leakage sensor breakerssignals* Traffic - Transportation control and safety equipment (aircraft, train, automobile etc.) * Computers 1 If the use of the product in the above application areas is for equipment listed in paragraphs (2) or (3). please be sure to observe the precautions given in those respective paragraphs. (2) Appropriate measures, such as fail-safe design and redundant design considering the safety design of the overall system and equipment, should be taken to ensure reliability and safety when this product is used for equipment which demands high reliability and safety in function and precision, such as - Tooling machines * Measuring equipment* Telecommunication equipment (Terminal) - Home appliances* Audio visual equipment* OA equipment :(1) This product is designed for use in the following application areas SPECI: IFICATION I OPTO-ELECTRONIC DEVICES DIV. DEVICE SPECIFICATION FOR PHOTOCOUPLER Business dealing name MODEL No. PC814 1. These specification sheets include materials protected under copyright of Sharp Corporation (“Sharp”). Please do not reproduce or cause anyone to reproduce them without Sharp’s consent. 2. When using this product, please observe the absolute maximum ratings and the Instructions for use outlined in these specification sheets, as well as the precautions mentioned below. Sharp assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets, and the precautions mentioned below. (Precautions) January23, 1998 PAGE 10 Pages APPROVED BY: DATE: ELECTRONIC COMPONENTS GROUP SHARP CORPORATION REPRESENTATIVE DMSION ISSUE SW . iy$?A, g4fi .q&l,Li: /I: PREPARED BY: DATE: SPEC. No. ED-96 197XB
Ta=25% vc,=5v PC814Xl A 0.5 to 1.5 1mAI,=+ (mA1 Test product dealing name conditions PC8 14X A or no mark 0.2 to 3.0 (“0” mark indicates business dealing name of ordered product) Ordered Business Rank mark Ic (Ic) Delivery rank table that the isolation voltage be measured in insulation oil.1
6.2 Collector current
(21 The dielectric withstand tester with zero-cross circuit shall be used. (31 The wave form of applied voltage shall be a sine wave. (It is recommended (1) Short between anode and cathode on the primary side, and between collector and emitter on the secondary side. CY8543K02. 3. Ratings and characteristics Refer to the attached sheet, page 4 to 6. 4. Reliability Refer to the attached sheet, page 7. 5. Outgoing inspection Refer to the attached sheet, page 8. 6. Supplement 6.1 Isolation voltage shall be measured in the following method. spectication applies to the outline and characteristics of photocoupler Model No. PC8 14X. 2. Outline Refer to the attached drawing No. SHARP CORPORATION 1.Application This
PBBO, and PBB, are not used in this device at all. 7. Notes Refer to the attached sheet-l-1.2. (Methylchloroforml
6.7 Brominated flame retardants
Specific brominated flame retardants such as the -Trichloroethane tetracbloride, 1.1.1 Halon, Carbon CFC,, : - component. Materials for ODS shaI.I not contain the following materials. Also, the following materials shall not be used in the production process for this device - component This photocoupler is designed for AC input.. product is not designed against irradiation. This product is assembled with electrical input and output. This product incorporates non-coherent light emitting diode.
6.6 ODS materials
: E64380 6.4 6.5 : PC8 14X UL file No. Z/8 6.3 This Model is approved by UL. Approved Model No. PC814X
1 January 23, 1998
MODEL No. PAGE SHRRP CORPORATION ED-96197XB
PC814X) Drawing No. l/l mm PC814 Name Outline Dimensions (Business dealing name shall be or shall not be marked. UNIT: *2) Factory identification mark shall be marked according to DIN standard. 0.25g * 1) 2-digit number : Approx. 1-k l Z Pin Nos. and internal connection diagram Product mass =I-, Rankmark Primary side mark SHARP CORPORATION
6O%RH For 10 s : 0.001 (Refer to Fig. 5) AC for 1 mm, 40 to ps, Duty ratio widths100 derating factors of absolute maximum ratings due to ambient temperature are shown in Fig. 1 to 4. Pulse t PAGE The 1 January23. 1998 MODEL No. ED-96197XB *4 Soldering temperature vECO 6 V mW Collector-emitter voltage VCEO 35 V Emitter-collector voltage *l Power dissipation P 70 +1 AIm*2 Peak forward current mA Input +50IF*l Forward current Ta=25’C Parameter Symbol Rating unit 4/8PC814X SHARP CORPORRTION 3. Ratings and characteristics
3.1 Absolute maximum ratings
psn 3 18 R,=lOO If Ic=2mA ,KSvc,=2v 4 18 tr R, -3dB Response time (Rise) Response time (Fall) R,=lOO kHz- Ic=2mA 15 80 Vc,=5V, pF Cut-off frequency fc f=lMHz 0.6 1.0 v=o, c-f r teristics Floating capacitance 6O%RH charac- n Transfer 40 to -5XlO’O 10” DC500VRiSO IF=+20mA 0.1 0.2 v saturation voltage Ic=lmA Isolation resistance CEbat) vc,=5v Collector-emitter V mA- 3.0 1mA 0.2 IF=+ - V breakdown voltage Collector current Ic - I,=0 6 ,uA, I,=10 BVECO IF=0 Emitter-collector Ta=25C Collector-emitter output breakdown voltage PC814.x
3.2 Electra-optical characteristics
2 Duty ratio
Ta=25’C puswidths 100 Pulse % ( (Fig. 4) Total power dissipation vs. ambient temperature -30 0 25 50 75 100 125 Ambient temperature Ta % ( vs. duty ratio (Fig. 2) Diode power dissipation vs. ambient temperature Ambient temperature Ta 5) Peak forward current (Fig. “C ( z vs. ambient temperature -30 0 25 50 75 100 125 Ambient temperature Ta (Fig. 3) Collector power dissipation “C ( 618 (Fig. 11 Forward current vs. ambient temperature -30 0 25 55 75 100 125 Ambient temperature Ta PC814X PAGE 1 Januarv23. 1998 MODEL No. SHARP CORPORATION I ED-96197XB
*3 Terminal bending direction is shown below. $2 Solder shall adhere at the area of 95% or more of immersed portion of lead, and pin hole or other holes shall not be concentrated on one portion. *l Test method, conforms to JIS C 702 1. n=22,C=O In=22,C=O I,C=On=22 n=22,C=O n=22,C=O n=ll, C=O n=ll, C=O n=ll, C=O (i-i) Defective(C) specitication limit Samples : Lower : Upper specification limit L n=ll, C=O U -2’ ’ >’ CE(sat) n=ll, C=O V <LXO.7I, ‘ux2 C=O ICEO n=ll, v,>ux 1.2 OOOh Failure Judgement Criteria Ta=25’C, 1 Ptot=200mW1,=+_5OmA, lOOOh Operation life -55-C, I lOOOh Low temp. storage +125%, I lOOOh humidity storage High temp. storage 9O%RH, t6OC, (30min) 20 cycles test High temp. and high (30min) “C to + 125°C Temperature cycling 1 cycle -55 PC814X MODEL No. PAGE CORPORRTI ON ED-96197XB 2 direction SHARP / X, Y, 200m/s2 4 times 1ooHz/4min +Z direction Variable frequency vibration 100 to 2000 to tY, fX, 0.5ms 3 times/ 15000m/s2, 2.5N 2 times/each terminal Mechanical shock Weight : 5N 5 s/each terminal Terminal strength (Bending) s Terminal strength (Tension1 Weight 260%, 10 I 230%, 5s Soldering heat I‘2 Solderability 10%/20% Test Items Test Conditions 4. Reliability The reliability of products shall satisfy items listed below. Confidence level : 90% LTPD:
I Major Electrical characteris tics defect Unreadable marking Appearance defect except the above mentioned. I (%l (21 Appearance
5.2 Sampling method and Inspection level
A single sampling plan, normal inspection level II based on IS0 2859 is applied. The AQL according to the inspection items are shown below. Defect Inspection item AQL vi%-0, k I v,,,,, , V,, I,, B/B 5. Outgoing inspection
5.1 Inspection items
(1) Electrical characteristics PC814x I January 23, 1998 MODEL No. PAGE SHRRP CORPORATION ED-96197XB
5year.s)/ : Ethyl alcohol, Methyl alcohol, Isopropyl alcohol In case when the other solvent is used, there are cases that the packaging resin is eroded. Please use the other solvent after thorough confirmation is performed in actual using condition. 2. The LED used in the Photocoupler generally decreases the light emission power by operation. In case of long operation time, please design the circuit with considering the degradation of the light emission power of the LED. (50% : The effect to device by ultrasonic cleaning differs by cleaning bath size, ultrasonic power output, cleaning time, PWB size or device mounting condition etc. Please test it in actual using condition and confirm that doesn’t occur any defect before starting the ultrasonic cleaning. (3) Applicable solvent 45C or less Immersion for 3 mm or less (2) Ultrasonic cleaning : Solvent temperature PC814X Attach sheet- 1- 1 Precautions for Photocouplers
1 For cleaning
(1) Solvent cleaning
1 PAGE
1 January23, 1998
MODEL No. SHARP CORPORATION ED-96197XB
rise In the resin. So keep the package temperature within that specified in Item (2). Also avoid immersing the resin part in the solder. It is recommended that only one soldering be done at the temperature and the time within the temperature profile as shown in the figure before. (3) Other precautions An infrared lamp used to heat up for soldering may cause a localized temperature ‘0 2 4 6 8 10 12 14 16 18 20 Soldering time (s) (2) If solder reflow ; Solder edi---/ i: -(“C) 40 E temperature __--_..-- _.-- Device 100 _.--..-*- ..D 120 160 s or less 180 ‘c10 PC814X Attach sheet- 1 3. Precautions for Soldering Photocouplers (1) In case of soldering An example of device temperature to lead vs. soldering time 260 MODEL No. PAGE ED-96197XB SHARP CORPORATION