PBW1CA-3B ELITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

§ High intensity. § Viewing angle 70°. § Reliable and Rugged § Standard 5mm diameter package. Outline Dimensions Absolute Maximum Ratings（Ta=25℃） Directive Characteristics（Ta=25℃） Relative Luminous Intensity Luminous Flux（lm）☆ Forward Voltage（V） Forward Voltage（V）Reverse Current（µA） Wavelength Characteristics Part No. ☆ Axial Direction (luminous Intensity ) Electrical-Optical Characteristics（Ta=25℃） ITEM MATERIALS Resin(Mold) Epoxy Lens Color Water Transparent Lead Frame Ag Plating Copper Alloy Dice InGaN Notes: § All dimensions are in millimeters（inches）. § Tolerance is ±0.25（.010）㎜ unless otherwise noted. § Protruded resin under flange is 1.0 ㎜（.04）max. § Lead spacing is measured where the leads emerge from the package. § Caution in ESD: Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti -electrostatic glove when handling the LED. All devices, Equipment and machinery must be properly grounded. Value Item Symbol White Unit Power Dissipation PD 120 mW DC Forward Current IF 30 mA Pulsed Forward Current IFP 100 * mA Reverse V oltage VR 5 V Operating Temperature Topr -25 ~ +80 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature△ Tsol 260 ℃ * Duty 1/10 Pulse Width 0.1ms This Rating is Zener Diode △ At the position of 4mm from the bottom of the package within 5 seconds. PAGE 1/3 EDITION 2.0 全周

The data typical , and the value is not guaranteed. Forward Current IF(mA) Forward Voltage VF(V) IF-VF(Ta=25℃) Forward Current IF(mA) Relative Luminous Intensity-IF (Ta=25℃) Relative Luminous Intensity Wavelength Characteristics (Ta=25℃) Wavelength λ (nm) Relative Luminous Intensity Relative Luminous Intensity Relative Luminous Intensity-Ta Ambient Temperature Ta (℃) Ambient Temperature Ta (℃) Forward Current IF(mA) IF-Ta θ – λ(Ta=25℃) Wavelength λ (nm) PAGE 2/3 EDITION 2.0

Reliability Test Items And Conditions. NO Item Test Conditions Test Hours/Cycle Sample Size Ac/Re

1 Solder Heat TEMP:260℃±5℃ 5SEC 76PCS 0/1

2 Temperature Cycle

H:+85℃ 30MIN ∫5MIN L:-55℃ 30MIN 50CYCLES 76PCS 0/1

3 Thermal Shock

H:+100℃ 5MIN ∫10SEC L:-10℃ 5MIN 50CYCLES 76PCS 0/1

4 High Temperature

TEMP:100℃ 1000HRS 76PCS 0/1

5 Low Temperature

TEMP:-55℃ 1000HRS 76PCS 0/1

6 DC Operating Life

TEMP:25℃ IF=20mA 1000HRS 76PCS 0/1

7 High Temperature/

85℃/85%RH 1000HRS 76PCS 0/1 PAGE 3/3 EDITION 2.0