DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
P r o d u c t I n n o v a t i o n F r o m PA10M/883 PA10MU 1 PA10M/883 BURN IN CIRCUIT * These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125°C. SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS 1 Quiescent current IQ 25°C ±40V VIN = 0, AV = 100, RCL = .1Ω 30 mA
1 Input offset voltage VOS 25°C ±40V VIN = 0, AV = 100 ±6 mV
1 Input offset voltage VOS 25°C ±10V VIN = 0, AV = 100 ±12 mV
1 Input offset voltage VOS 25°C ±45V VIN = 0, AV = 100 ±7 mV
1 Input bias current, +IN +IB 25°C ±40V VIN = 0 ±30 nA
1 Input bias current, –IN –IB 25°C ±40V VIN = 0 ±30 nA
1 Input offset current IOS 25°C ±40V VIN = 0 ±30 nA
3 Quiescent current IQ –55°C ±40V VIN = 0, AV = 100, RCL = .1Ω 75 mA 3 Input offset voltage VOS –55°C ±40V VIN = 0, AV = 100 ±11 .2 mV 3 Input offset voltage VOS –55°C ±10V VIN = 0, AV = 100 ±17 .2 mV 3 Input offset voltage VOS –55°C ±45V VIN = 0, AV = 100 ±12.2 mV
3 Input bias current, +IN +IB –55°C ±40V VIN = 0 ±115 nA
3 Input bias current, –IN –IB –55°C ±40V VIN = 0 ±115 nA
3 Input offset current IOS –55°C ±40V VIN = 0 ±115 nA
2 Quiescent current IQ 125°C ±40V VIN = 0, AV = 100, RCL = .1Ω 30 mA 2 Input offset voltage VOS 125°C ±40V VIN = 0, AV = 100 ±12.5 mV 2 Input offset voltage VOS 125°C ±10V VIN = 0, AV = 100 ±18.5 mV 2 Input offset voltage VOS 125°C ±45V VIN = 0, AV = 100 ±13.5 mV
2 Input bias current, +IN +IB 125°C ±40V VIN = 0 ±70 nA
2 Input bias current, –IN –IB 125°C ±40V VIN = 0 ±70 nA
2 Input offset current IOS 125°C ±40V VIN = 0 ±70 nA
4 Output voltage, I O = 5A VO 25°C ±18V RL = 2.07Ω 10 V
4 Output voltage, I O = 80mA V O 25°C ±45V RL = 500Ω 40 V
4 Output voltage, I O = 2A VO 25°C ±30V RL = 12Ω 24 V
4 Current limits ICL 25°C ±17V RL = 12Ω, RCL = 1Ω .6 .89 A 4 Stability/noise EN 25°C ±40V RL = 100Ω, AV = 1, CL = .33nF 1 mV
4 Slew rate SR 25°C ±40V RL = 500Ω 2 10 V/µs
4 Open loop gain AOL 25°C ±40V RL = 500Ω, F = 10Hz 96 dB
4 Common mode rejection CMR 25°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
6 Output voltage, I O = 5A VO –55°C ±18V RL = 2.07Ω 10 V
6 Output voltage, I O = 80mA V O –55°C ±45V RL = 500Ω 40 V
6 Output voltage, I O = 2A VO –55°C ±30V RL = 12Ω 24 V
6 Stability/noise EN –55°C ±40V RL = 100Ω, AV = 1, CL = .33nF 1 mV
6 Slew rate SR –55°C ±40V RL = 500Ω 2 10 V/µs
6 Open loop gain AOL –55°C ±40V RL = 500Ω, F = 10Hz 96 db
6 Common mode rejection CMR –55°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
5 Output voltage, I O = 3A VO 125°C ±14.3V RL = 2.07Ω 6.3 V
5 Output voltage, I O = 80mA V O 125°C ±45V RL = 500Ω 40 V
5 Output voltage, I O = 2A VO 125°C ±30V RL = 12Ω 24 V
5 Stability/noise EN 125°C ±40V RL = 100Ω, AV = 1, CL = .33nF 1 mV
5 Slew rate SR 125°C ±40V RL = 500Ω 2 10 V/µs
5 Open loop gain AOL 125°C ±40V RL = 500Ω, F = 10Hz 96 dB
5 Common mode rejection CMR 125°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
100KΩ 100KΩ +15V –15V 20Ω * * U.U.T Table 4 Group A Inspection PA10M/883P r o d u c t I n n o v a t i o n F r o m Copyright © Cirrus Logic, Inc. 2009 (All Rights Reserved)http://www.cirrus.com SEP 2009 APEX − PA10MUREVM
P r o d u c t I n n o v a t i o n F r o m PA10M/883
2 PA10MU
CONTACTING CIRRUS LOGIC SUPPORT For all Apex Precision Power product questions and inquiries, call toll free 800-546-2739 in North America. For inquiries via email, please contact apex.support@cirrus.com. International customers can also request support by contacting their local Cirrus Logic Sales Representative. To find the one nearest to you, go to www.cirrus.com IMPORTANT NOTICE Cirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, indemnification, and limitation of liability. No responsibility is assumed by Cirrus for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives con- sent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROP - ERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PROD - UCTS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUS- TOMER’S RISK AND CIRRUS DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE CUSTOMER OR CUSTOMER’S CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES, BY SUCH USE, TO FULLY INDEMNIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL LIABILITY, INCLUDING ATTORNEYS’ FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES. Cirrus Logic, Cirrus, and the Cirrus Logic logo designs, Apex Precision Power, Apex and the Apex Precision Power logo designs are trademarks of Cirrus Logic, Inc. All other brand and product names in this document may be trademarks or service marks of their respective owners.