P77BRWSR

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

TriMode™ Probe Family P7700 Series TriMode Probes The P7700 Series TriMode probes provide the highest probe fidelity available for real-time oscilloscopes. In addition, with connectivity innovations such as solder down tips with the probe’s input buffer mounted only a few millimeters from the end of the tip, the P7700 series probes provide unmatched usability for connecting to today’s most challenging electronic designs. Key features High bandwidth for signal fidelity

20 GHz P7720

16 GHz P7716

13 GHz P7713

8 GHz P7708

Thin and flexible solder tips Lightweight and flexible probe cable Active buffer tip design for low probe loading Easy to connect TekFlex™ Connector technology Pinch-to-Open accessory connector Versatile Connectivity - solder down tips, optional browser for handheld or fixtured probing, and coaxial input (SMA adapter) Full Bandwidth to 20 GHz Probe cable and solder down tips operate over an extended temperature range Probe and tip specific S-parameters Full AC calibration of the probe and tip's signal path based upon unique s-parameter models Unique DSP filters created for each probe and tip TekConnect interface for oscilloscope/probe control and usability Direct control via probe buttons or from the oscilloscope's menus Automated control of probe settings via the oscilloscope Automatic recognition of the probe and tip when attached to the oscilloscope

Applications

DDR/LPDDR memory verification High speed serial bus debugging MIPI D-PHY/C-PHY/M-PHY conformance tests HDMI and DisplayPort compliance tests www.tek.com 1

P7700 Series TriMode Probes With TriMode probing one probe setup makes differential, single ended, and common mode measurements accurately. This unique capability allows you to work more effectively and efficiently, switching between differential, single ended and common mode measurements without moving the probe's connection points. TekFlex connector technology The P7700 Series TriMode probes use the new TekFlex connector technology that combines a high speed signal path with power and communication support for an active buffer tip in a single, easy to connect accessory connector. The TekFlex connector has a pinch-to-open design that when open requires minimal force to attach an accessory tip. When the TekFlex connector is closed, it provides a secure connection to the accessory to avoid accidental disconnections. With the TekFlex connector, the P7700 series probes offer a set of active probe tips with the probe's buffer amplifier only millimeters from the input connections. The short signal path enabled with the active tips provides high fidelity and a high impedance input. It also minimizes signal loss, capacitance, and additive noise. P77STFLXA solder down, flex-circuit accessory with an active buffer amplifier on its tip. P77STFLXB solder down, flex-circuit accessory provides a probing solution for DDR4 and LPDDR4 electrical validation when used with Nexus XH Series Interposers. Datasheet 2 www.tek.com

P77STCABL solder down accessory with a long reach, flexible cable combined with an active buffer amplifier on the tip. Browser accessory for handheld probing When you need to make a quick measurement or debug a problem, the P7700 series browser accessory provides a simple to use option. With precision engineered tips that are easy to see and position accurately, the P77BRWSR handheld browser accessory enables hand or fixtured probing and is ideal for probing fine pitch components and differential traces with spacing as narrow as 0.2 mm (.008 in). P77BRWSR handheld browser accessory enables hand or fixtured probing with adjustable tip spacing. Up to 16 GHz bandwidth. The browser's tips have a full range of compliance and are adjustable in spacing using a convenient thumb wheel. A headlight on the tip enhances visibility of the probe point and can be switched on and off as needed. The browser tips are constructed of high strength BeCu and super-ceramic resistors 1. With 16 GHz bandwidth performance, the P77BRWSR handheld browser accessory enables hand or fixtured probing with signal fidelity and convenience. Headlight on P77BRWSR handheld browser accessory enables hand or fixtured probing and enhances visibility of the probe point Coaxial input (SMA) adapter RF/coaxial connectors, such as SMA, are often found on test fixtures or on prototype board designs. Attaching a P7700 series probe to these on-board connectors is easy with the SMA adapter. The P77C292MM adapter allows you to connect to 2.92 mm, 3.5 mm or SMA connectors with full bandwidth and low noise. The P77C292MM adapter includes TriMode functionality enabling differential, single ended, and common mode measurements.

1 Patent pending pin technology

www.tek.com 3

For compliance testing of the HDMI and DisplayPort standards, the P77C292MM and P7700 series probes are fully supported in Tektronix' automated measurement suites for these standards. With the P77C292MM adapter attached, a P7700 series probe can provide the DC termination voltage required by HDMI and other high-speed communication standards. The termination voltage can be set manually or automatically using voltage sense circuitry in the P7700 probe and covers a range of ±4 V. P77C292MM SMA/2.92mm adapter for connecting to coaxial connectors Automatic probe and tip identification and AC calibration The P7700 Series probes automatically identify the accessory connected to the probe. When the probe and tip are attached to an oscilloscope, they are recognized and a unique DSP filter providing a calibrated response is enabled. All calibration and filter calculation is based upon a unique set of s-parameters stored in the probe and tip. These unique filters also de-embed probe parasitics from the measurement. Creating probe and tip specific filters is critical as bandwidths increase. At high bandwidth, small variations in the signal path can lead to significant variation in frequency response which cannot be corrected using a nominal DSP filter. The P77BRWSR accessory extends the calibration further. As the spacing of the browser's tips is adjusted, the change in opening is automatically recognized by the probe and oscilloscope. Using the value of the tip spacing, a width specific DSP filter is used to calibrate the probe's response. The automatic recognition of the probe and tips and the automatic filter selection eliminates the risk of manually selecting the wrong filter and improves your efficiency. Signal fidelity You can be confident in the signal fidelity of your measurements. The innovative new probe design uses SiGe technology to provide the bandwidth and fidelity needed today and in the future. The P7700 Series probe architecture provides: An active buffer amplifier on the tips with the solder-in tips' probe input only 3.2 mm from the input Excellent step response and low insertion loss up to 20 GHz Low-DUT loading with 100 kΩ (DC) and 0.4 pF (AC) performance High CMRR Low noise Performance you can count on Depend upon Tektronix to provide you with performance you can count on. In addition to industry leading service and support, these probes are backed by a one year warranty. Datasheet 4 www.tek.com

Specifications are typical unless noted otherwise. All specifications apply to all models unless noted otherwise. P7720 P7716 P7713 P7708 P77STFLXA P77STCABL P77C292MM P77STFLXB P77BRWSR P77STFLXA P77STCABL P77C292MM P77BRWSR P77STFLXB P77STFLXA P77STFLXB P77STCABL P77C292MM P77BRWSR P77STFLXA P77STFLXB P77STCABL P77C292MM P77BRWSR Bandwidth (typical) 20 GHz 2 15 GHz 16 GHz 16 GHz 15 GHz 13 GHz 8 GHz Rise time (10-90%) 27 ps 3 36 ps 32 ps 32 ps 36 ps 40 ps 55 ps Rise time (20-80%) 18 ps 24 ps 24 ps 24 ps 24 ps 28 ps 35 ps

Electrical characteristics

Coaxial input (SMA) adapter 0.7x/1.3x/2.7x/5x/10x Input range Solder-in tips Single-ended Differential 2.5 Vpp 5.0 Vpp Browser Single-ended Differential 6.0 Vpp 12.0 Vpp SMA adapter Single-ended Differential 1.2 Vpp 2.0 Vpp Operating voltage window Solder-in tips ±5.25 V Browser ±10 V SMA adapter ±4 V Offset voltage range Solder-in tips -4 V to +4 V Browser -10 V to +10 V SMA adapter -4 V to +4 V SMA adapter termination voltage range -4 V to +4 V DC gain accuracy ±2.0% 2 Differential and single ended modes only. Bandwidth is 19 GHz in the common mode setting. 3 Rise times in common mode setting: 29 ps (10 - 90%), 19 ps (20 - 80%). P7700 Series www.tek.com 5

DC input resistance (differential) Solder-in tips 100 kΩ Browser 150 kΩ SMA adapter 100 Ω Noise Solder-in tips < 32 nV/rt-Hz Browser < 80 nV/rt-Hz SMA adapter < 11 nV/rt-Hz Low frequency input capacitance (differential, typical) Solder-in tips 0.4 pF Browser 0.23 pF @ 50 mil spacing 0.22 pF @ 200 mil spacing CMRR, typical DC 34 dB

50 MHz 34 dB

1 GHz 24 dB

10 GHz 14 dB

20 GHz 10 dB

Non-destructive input range, typical Solder-in tips, Browser -15 V to +15 V SMA adapter -5 V to +5 V Nominal characteristics Oscilloscope interface Tekconnect ® Accessory connector TekFlex Cable length 1.3 m (4.3 feet) Weight Probe cable and head 3.5 oz Probe (comp box, cable, head) 9.6 oz Datasheet 6 www.tek.com

Operating: 0 °C to +45 °C (32 °F to 113 °F) Non-Operating: -20 °C to +60 °C (-4 °F to 140 °F) Cable and solder-in tips Operating: -35 °C to 85 °C (-31 °F to 185 °F) Non-Operating: -35 °C to 85 °C (-31 °F to 185 °F) SMA adapter Operating: -35 °C to 85 °C (-31 °F to 185 °F) Non-Operating: -35 °C to 85 °C (-31 °F to 185 °F) Compatibility Compatible oscilloscopes The P7700 series probes are compatible with the following oscilloscopes running Microsoft Windows 7 and Tekscope firmware version 10.6 or higher: DPO70000C series DSA70000C series MSO70000C series DPO70000D series DSA70000D series DPO70000DX series MSO70000DX series MSO70000SX series P7700 Series www.tek.com 7

Ordering information

P7700 Series TriMode Probes P7720 20 GHz TriMode probe with TekFlex connector technology P7716 16 GHz TriMode probe with TekFlex connector technology P7713 13 GHz TriMode probe with TekFlex connector technology P7708 8 GHz TriMode probe with TekFlex connector technology Standard accessories All probes include the following items: Accessory kit, Manual, Three solder-in tips, Magnetic cable holder for strain relief, Certificate of traceable calibration, Calibration data report, One-year warranty Service options Opt. C3 Calibration Service 3 Years Opt. C5 Calibration Service 5 Years Opt. D3 Calibration Data Report 3 Years (with Opt. C3) Opt. D5 Calibration Data Report 5 Years (with Opt. C5) Opt. G3 Complete Care 3 Years (includes loaner, scheduled calibration, and more) Opt. G5 Complete Care 5 Years (includes loaner, scheduled calibration, and more) Opt. R3 Repair Service 3 Years (including warranty) Opt. R3DW Repair Service Coverage 3 Years (includes product warranty period). 3-year period starts at time of instrument purchase Opt. R5 Repair Service 5 Years (including warranty) Opt. R5DW Repair Service Coverage 5 Years (includes product warranty period). 5-year period starts at time of instrument purchase Probe bandwidth upgrades As the frequencies of your test signals increase, the performance of your probes can increase too. The bandwidth of the P7700 series probes is fully upgradeable. For example, if you purchase an 8 GHz probe today, you can upgrade it to a higher bandwidth, up to 20 GHz, in the future at a fraction of the cost of purchasing a new probe. Bandwidth upgrade Model number Description/specification

8 GHZ to 13 GHz P77BW8T13 P7708 (8 GHz) to P7713 (13 GHz) probe upgrade

8 GHZ to 16 GHz P77BW8T16 P7708 (8 GHz) to P7716 (16 GHz) probe upgrade

13 GHz to 16 GHz P77BW13T16 P7713 (13 GHz) to P7716 (16 GHz) probe upgrade

8 GHz to 20 GHz P77BW8T20 P7708 (8 GHz) to P7720 (20 GHz) probe upgrade

13 GHz to 20 GHz P77BW13T20 P7713 (13 GHz) to P7720 (20 GHz) probe upgrade

16 GHz to 20 GHz P77BW16T20 P7716 (16 GHz) to P7720 (20 GHz) probe upgrade

The upgrade of the probe bandwidth is performed in a Tektronix service center. Datasheet 8 www.tek.com

P77STFLXA Active, solder-in tip with TekFlex connector technology, 20 GHz (5 tips/kit) 4 P77STFLXB Active, 75 Ω solder-in tip with TekFlex connector technology for DDR4/LPDDR4 electrical validation, 15 GHz (5 tips/kit) 5 P77STCABL Active, coaxial cable based, solder-in tip with TekFlex connector technology, 20 GHz P77BRWSR Browser accessory with TekFlex connector technology, 16 GHz P77C292MM SMA Coaxial adapter with TekFlex connector technology, 20 GHz 067-4889-xx DC probe calibration fixture P77DESKEW Deskew fixture 6 407-6019-xx Probe adapter to attach the browser to the PPM203B articulated arm/positioner Replacement parts Tektronix part number Description 020-3162-xx Replacement tip for browser accessory 020-3160-xx Browser pen wand 020-3161-xx Browser hands-free tripod 121-1003-xx Magnetic cable holder 129-1867-xx Large metal cable band 129-1857-xx Small metal cable band 4 Each probe ships with three of these solder-in tips as standard accessories. 5 For use with Nexus Technology XH Series Interposers. 6 Deskew fixture instructions can be downloaded from www.tek.com/downloads; search for P77DESKEW. P7700 Series www.tek.com 9

Tektronix part number Description 020-3163-xx Browser adapters 196-3436-xx Browser ground lead 016-1948-xx Color bands 017-0103-xx

38 AWG wire spool

Double-sided adhesive tape Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. Datasheet 10 www.tek.com

www.tek.com 11

ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200 Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835* Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835* Japan 81 (3) 6714 3086 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90 Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098 People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370 Republic of Korea +822 6917 5084, 822 6917 5080 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777 Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835* Taiwan 886 (2) 2656 6688 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200 * European toll-free number. If not accessible, call: +41 52 675 3777 price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.

09 Jul 2018 51W-60283-7

www.tek.com