DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 20
Technical content
Release Date: Aug. 2017 - 1 - Version A19.0 3-CHANNEL SPEECH+MELODY POWERSPEECH® SERIES N588H DATA SHEET The information described in this document is the exclusive intellectual property of Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton. Nuvoton is providing this document only for reference purposes of PowerSpeech® based system design. Nuvoton assumes no responsibility for errors or omissions. All data and specifications are subject to change without notice. For additional information or questions, please contact: Nuvoton Technology Corporation. www.nuvoton.com
Release Date: Aug. 2017 - 2 - Version A19.0 Table of Contents
Release Date: Aug. 2017 - 3 - Version A19.0 1. General Description The N588Hxxx is an advanced 3-ch Voice/Melody IC that combines with the technology of 8- bit 65C02 core and new 4 -bit or 5 -bit MDPCM synthesizer to implement sophisticated applications in high level of sound quality. The N588Hxxx improves the structure to minimize the external components for various applications. In addition , it allows customers to use internal Rosc with precise frequency control to save BOM cost and gain lower frequency deviation. Furthermore, the N588 Hxxx provides lots of function includes 16 ~ 24 I/Os where one port with high drive current , 128 ~ 192 Bytes RAM, H/W IR carrier, 2-ch Comparator and Low Voltage Detection. Meanwhile, N588Hxxx builds in 3-pair output pins with 64-level control for the applications of motors tiny control . The N588Hxxx also build in Watch Dog Timer and Low Voltage Reset to prevent latch-up situation occurring. The N588Hxxx family contains several items with different playback ROM size and duration as shown below table: N588Hxxx H061 H081 H120 H170 H200 *H201 H250 *H251 H340 *H341 H480 H650 ROM (KB) 206 254 414 510 704 704 830 830 1020 1020 1534 2044 Sec. (NM4, 6KHz) 65 80 131 162 223 223 263 263 324 324 486 648 I/O 16 16 16 16 24 24 24 24 24 24 24 24 *N588H201, N588H251, N588H341 no support LVD
Release Date: Aug. 2017 - 4 - Version A19.0 2. Features VDD range: 4MHz/6MHz: 2.2 ~ 5.5V 8MHz: 2.6 ~ 5.5V System clock: 4, 6, 8 MHz Oscillator: builds in internal Rosc (TRIM) RAM: 128B ~ 192B 16 ~ 24 bi-directional I/O pins BP00 ~ BP07, BP10 ~ BP17 can be set as Input or Output status individually Provides 8-pin with high sink current capability to drive LEDs 3-pair H/W PWM I/O pins with 6-bit resolutions to control motor BP00/02/04 are defined as 3 H/W PWM I/O pins. They can be paired with BP01/03/05 respectively by same (or opposite) phase of output waveform Builds in IR carrier generation circuit for simplifying firmware IR application Algorithm: 4-bit NM4, 4-bit NM4S, 5-bit MDM Audio output: 12-bit PWM Channel: 3-channel Voice or Melody 3-ch Voice 3-ch Melody 1-ch Voice + Dual tone melody Built-in Watch-Dog Timer (WDT) 3 voltage levels of Low Voltage Reset (LVR) by mask option LVR: 2.0V, 2.2V, 2.7V Builds in Low Voltage Detection (LVD) with 4 voltage levels LVD: 2.2V, 2.4V, 2.7V, 3.3V (N588H201, N588H251, N588H341 no support LVD) Built-in 2-channel comparator Support PowerScriptTM for developing codes in easy way Full-fledged development system Source-level ICE debugger (Assembly & PowerScriptTM format) Ultra I/OTM tool for event synchronization mechanism Available package form: COB is essential Package SOP14 (150 mil): N588H061, N588H081; 5 x IO
Release Date: Aug. 2017 - 5 - Version A19.0 Package SOP14 (150 mil): N588H120, N588H170; 4 x IO Package SOP20 (300 mil): N588H061, N588H081, N588H120, N588H170; 8 x IO Package LQFP48 (7x7 mm): N588H061, N588H081, N588H120, N588H170; 16 x IO Package LQFP48 (7x7 mm): N588H200, N588H250, N588H340; 20 x IO Package LQFP64 (7x7 mm): N588H200, N588H250, N588H340; 24 x IO Package LQFP64 (10x10 mm): N588H480, N588H650; 17 x IO Package LQFP128 (14 x 14 mm): N588H480, N588H650; 24 x IO 3. Pin Description Pin Name I/O Function /RESET I IC reset input, low active. BP00 ~ BP07 I/O General input/output pins. Each pin can be set as Input or Output individually. When the pin will be set output by BP0D, user needs to set BP0x value of 0/1 first. For output pin, BP0 provides high-sink current. For input pin, it can be set as pull-high or floating BP00/02/04 can be set as 3 -pin H/W PWM output with 64 -level resolution. They can be paired with BP01/03/05 (also H/W PWM output) respectively with same or opposite phase of output waveform BP07 can be configured as IR carrier output BP10 ~ BP17 I/O General input/output pins. Each pin can be set as Input or Output individually. When the pin will be set output by BP1D, user needs to set BP1x value of 0/1 first. For input pin, it can be set as pull-high or floating. BP1 can generate interrupt request to release IC from STOP mode *BP20 ~ BP27 I/O General input/output pins. Each pin can be set as Input or Output by group, BP20 ~ BP23 configured by BP2D[0], and BP24 ~ BP27 by BP2D[1]. When the pin will be set output by BP2D, user needs to set BP2x value of 0/1 first. PWM+ O PWM driver positive output to drive speaker directly PWM- O PWM driver negative output to drive speaker directly VDD Power Positive power supply for uP and peripherals VSS Power Negative power supply for oscillation, uP and peripherals VDD_IO Power Positive power supply for I/O VSS_IO Power Negative power supply for I/O
Release Date: Aug. 2017 - 6 - Version A19.0 Pin Name I/O Function VDD_SPK Power Positive power supply for speaker driver VSS_SPK Power Negative power supply for speaker driver Note: BP 20 ~ BP27 only provides in N588H2 00/201, N588H250/251, N588H340/341, N588H480 and N588H650
Release Date: Aug. 2017 - 7 - Version A19.0 4. Block Diagram 5. Electrical Characteristics
5.1 Absolute Maximum Ratings
Parameter Symbol Conditions Rated Value Unit Power Supply VDDVSS - -0.3 to +7.0 V Input Voltage VIN All Inputs VSS -0.3 to VDD +0.3 V Storage Temp. TSTG - -55 to +150 C Operating Temp. TOPR - 0 to +70 C Note: Exposure to conditions beyond those listed under the Absolute Maximum Ratings table may adversely affect the life and reliability of the device. 5.2 D.C. Characteristics (VDD VSS = 4.5V, TA = 25 C, No Load unless otherwise specified) Parameter Sym Conditions Min Typ Max Unit Operating Voltage VDD FOSC = 4 MHz 2.2 - 5.5 V FOSC = 6 MHz 2.2 - 5.5 V FOSC = 8 MHz 2.6 5.5 V Operating Current IOP1 No load, FOSC = 6 MHz N588H061 ~ N588H341 - 5 7 mA No load, FOSC = 6 MHz N588H480, N588H650 - 7.5 9.5 mA Standby Current (STOP) IDD1 No load - 1 2 A Clock Generator Timer/ Counter I/O RAM/ Register MCU Core PWM BP00 ~ BP07 PWM+ PWM- OSC (TRIM) ROM BP10 ~ BP17 BP20 ~ BP27 MIXER Comparator
Release Date: Aug. 2017 - 8 - Version A19.0 Input Low Voltage VIL All input pins VSS - 0.3 VDD V Input High Voltage VIH All input pins 0.7 VDD - VDD V Input Current BP0, BP1, BP2 IIN1 VIN = 0V, pulled-high resistor = 500KΩ -5 -9 -14 A Input Current BP0,BP1, BP2 IIN2 VIN = 0V, pulled-high resistor = 150KΩ -15 -30 -45 A Output Current (BP0) IOL VDD = 3V, VOUT = 0.4V 8 12 - mA IOH VDD = 3V, VOUT = 2.6V -4 -6 - mA IOL VDD = 4.5V, VOUT = 1.0V - 25 - mA IOH VDD = 4.5V, VOUT = 3.5V - -12 - mA Output Current (BP1, BP2) IOL VDD = 3V, VOUT = 0.4V 4 5 - mA IOH VDD = 3V, VOUT = 2.6V -4 -6 - mA IOL VDD = 4.5V, VOUT = 1.0V - 12 - mA IOH VDD = 4.5V, VOUT = 3.5V - -12 - mA Output Current IOL1 RL= 8Ω [PWM+]---[RL]----[PWM-] +250 - - mA PWM+ / PWM- IOH1 -250 - - mA Comparator input common mode range VCM VDD=2.2 ~ 5.5V 0.1 VDD-1.5 V Comparator input offset voltage VOS External (Vcm=2.5V) 50 - mV *LVD detect voltage VLVD CTL_CPU [5,3] = 0_1 CTL_CPU [5,3] = 1_1 CTL_CPU [5,3] = 0_0 CTL_CPU [5,3] = 1_0 2.2 2.4 2.7 3.3 - V Note*: N588H201, N588H251, N588H341 no support LVD 5.3 A.C. Characteristics (VDD = 4.5V, TA = 25C, No Load unless otherwise specified) Parameter Sym Conditions Min Typ Max Unit Main Clock Frequency FM FOSC = 4 MHz FOSC = 6 MHz FOSC = 8 MHz 3973 5960 7946 4096 6144 8192 4219 6328 8438 KHz Frequency Deviation by Voltage Drop F/F (Fmax – Fmin)/Fmin
Release Date: Aug. 2017 - 9 - Version A19.0 6. Application Circuit Note: - For general applications, C1 (4.7uF) is must to stable system power - For motor application, the C1 (4.7uF), C2 (0.1uF), and R1 (10Ω) are all necessary - C1 value need to be adjusted according to the loading, such as motor control application. - C3 (0.1uF) is required to stabilize reset signal
Release Date: Aug. 2017 - 10 - Version A19.0 7. Package Information N588H061 / N588H081 SOP14 (150 mil) GPIO: BP10 ~ BP13, BP07, (5 x I/O) SOP20 (300 mil) GPIO: BP00 ~ BP03, BP10 ~ BP13, (8 x I/O) LQFP48 (7x7x1.4mm footprint 2.0mm) GPIO: BP00 ~ BP07, BP10 ~ BP17, (16 x I/O)
Release Date: Aug. 2017 - 11 - Version A19.0 N588H120 / N588H170 SOP14 (150 mil) GPIO: BP10, 11, 12, 17 (4 x I/O) SOP20 (300 mil) GPIO: BP00~ 03, BP10 ~ 13, (8 x I/O) LQFP48 (7x7x1.4mm footprint 2.0mm) GPIO: BP00 ~ BP07, BP10 ~ BP17, (16 x I/O)
Release Date: Aug. 2017 - 12 - Version A19.0 N588H200 / N588H250 / N588H340 LQFP48 (7x7x1.4mm footprint 2.0mm) GPIO: BP00 ~ BP0 7, BP10 ~ BP1 7, BP24 ~ BP27 (20 x I/O) LQFP64 (7x7x1.4mm footprint 2.0mm) GPIO: BP0, BP1, BP2 (24 x I/O) N588H480 / N588H650 LQFP64 (10x10x1.4mm footprint 2.0mm) GPIO: BP00 ~ 07, BP10 ~ 17, BP27 (17 x I/O) LQFP128 (14 x 14 x 1.4mm footprint 2.0 mm) GPIO: BP0, BP1, BP2 (24 x I/O)
Release Date: Aug. 2017 - 13 - Version A19.0
Release Date: Aug. 2017 - 14 - Version A19.0
Release Date: Aug. 2017 - 15 - Version A19.0 1 12 H H Controlling dimension : Millimeters 0.10 070 0.004 1.00 0.750.600.45 0.039 0.0300.0240.018 0.50 0.20 0.25 1.451.40 0.10 0.15 1.35 0.008 0.010 0.0570.055 0.026 0.004 0.006 0.053 Symbol Min Nom Max MaxNomMin Dimension in inch Dimension in mm A b c D e HD HE L Y A A E 0.008 0.006 0.15 0.20 0.020 0.35 0.65 0.014 36 25
Release Date: Aug. 2017 - 16 - Version A19.0
Release Date: Aug. 2017 - 17 - Version A19.0 0 70 1.00 0.750.60 12.00 0.45 0.039 0.0300.024 0.472 0.018 0.50 0.20 0.27 1.45 1.60 10.00 1.40 0.09 0.17 1.35 0.05 0.008 0.011 0.057 0.063 0.393 0.055 0.020 0.004 0.007 0.053 0.002 Symbol Min Nom Max MaxNomMin Dimension in inch Dimension in mm A b c D e HD HE L y A A E 0.008 0.20 0.393 10.00 0.472 12.00 0.006 0.15 0.004 0.10 3.5 3.5
Release Date: Aug. 2017 - 18 - Version A19.0
Release Date: Aug. 2017 - 19 - Version A19.0 8. Revision History Version Date Substantial Changes Page A1.0 Jan. 2012 Initial release. All A2.0 Feb. 2012 Revise N588H060 ROM size Revise Working Voltage Revise AC characteristic table A2.1 Mar. 2012 Revise BP0, BP2 input description Revise BP1, BP2 output current Revise frequency deviation (by voltage drop) A2.2 May 2012 Revise VDD range in 8MHz and 6MHz ADD LVR value Add output current of BP1, BP2 at VDD 4.5V Add comparator and LVD spec Revise AP circuit 0.1uF as 4.7uF 3, 5 5, 6 A2.3 Jun. 2012 Revise duration 2 A3.0 Oct. 2012 Remove the word of “preliminary” Rename part number of N588H060, H080 as N588H061, H081 A4.0 Dec. 2012 Resume N588H060, N588H080 Add availability note of N588H061, N588H081 A5.0 Dec. 2012 Revise ROM size on N588H060, N588H120, N588H250 2 A6.0 Sep. 2013 Remove N588H060, N588H080 Revise application circuit in 7, 8 A7.0 Feb. 2014 Modify the description of 3-pair H/W PWM I/O A8.0 Mar. 2014 Revise AP circuit: C1 4.7uF change as 0.1uF 7 A9.0 Dec. 2014 Add N588H200 part number, revise duration and LVD level Update application circuits 2~8 A10.0 Mar. 2015 Revise VDD range and LVD level 3, 6 A11.0 Sep. 2015 Add item of N588H201, N588H251, N588H341, N588H480, N588H650 2 A12.0 Nov. 2015 Revise application circuit 7 A13.0 Dec. 2015 Update pad name of VDD_IO and VSS_IO 4, 7 A14.1 Feb. 2016 Revise operation current in DC Characteristics 6 A15.0 Jun. 2016 Modify note 8 A16.0 Sep. 2016 Update Note of Application Circuit 8 A17.0 May.2017 Add package information 9~14 A18.0 Jul. 2017 Revise LQFP64 pin assignment, add SOP14, SOP20, LQFP128 package 9 ~ 21 A19.0 Aug. 2017 Update package information 9 ~ 17
Release Date: Aug. 2017 - 20 - Version A19.0 Important Notice Nuvoton Products are neither intended nor w arranted for usage in systems or equipment, any malfunction or failure of which may cause loss of human life, bodily injury or severe property damage. Such applications are deemed, “Insecure Usage”. Insecure usage includes, but is not limited to: equipmen t for surgical implementation, atomic energy control instruments, airplane or spaceship instruments, the control or operation of dynamic, brake or safety syste ms designed for vehicular use, traffic signal instruments, all types of safety devices, and other applications intended to support or sustain life. All Insecure Usage shall be made at customer’s risk, and in the event that third parties lay claims to Nuv oton as a result of customer’s Insecure Usage, customer shall indemnify the damages and liabilities thus incurred by Nuvoton.