N5412D KEYSIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software for Infiniium 90000 and Z-Series Oscilloscopes Data Sheet
- The test circuits and parameters are defined in the Project TID/2212-D: Serial Attached SCSI-3 (SAS-3) working draft, hereinafter referred to as “the SAS-3 specification.” Introduction N5421A SAS IT/IR Test Fixtures for SFF-8482 SAS-2 x2 Internal Plug/ Receptacle Interfaces Wilder Technologies SAS IT/IR Test Fixtures for SFF-8482 SAS-3 x2 Internal Plug/Receptacle Interfaces Wilder Technologies Mini- SAS HD Test Fixtures for SAS-3 Plug/Receptacle Interfaces The SAS-3 electrical test software simplifies the validation of SAS designs: – Test definitions based on T10 SAS-3 specification and UNH-IOL SAS 3.0 Physical Layer Test Suite – Support SAS 1.5, 3.0, 6.0 and
12.0 Gbps data rates
– Support transmitter tests that require SAS3_EYEOPENING and WDP scripts – Easily select tests and configure IT/CT interfaces for compliance testing – Automated setup and programming of scope measurements – Graphical HTML test results report format for documentation and sharing – Trials test reporting capability to allow quick comparison of test results with multiple test patterns or device configurations Verify and debug your SAS devices faster and more easily Keysight Technologies, Inc. Serial Attached SCSI-3 (SAS-3) compliance test software for Infiniium Series oscilloscopes provides you with a fast and easy way to validate and debug your SAS 1.5, 3.0, 6.0 and
12.0 Gbps silicon, host bus adapter,
initiator, high-density disk drive or enclosure backplane. It also supports automated SAS out-of-band (OOB) and loop back signal tests with the 81134A pattern generator and N4903B BERT with Option 002. The SAS compliance test software allows you to automatically execute SAS electrical checklist tests at each of the IT and CT interface points and displays the results in a flexible report format. In addition to the measurement data, the report provides a margin analysis that shows how closely your device passed or failed each test. To make measurements with the SAS- 3 compliance test software, you also will need a method of connecting to the SAS compliance interface on the electrical mating surfaces of your SAS connector. Keysight currently provides a full set of compliance test fixtures for the SFF-8482, SAS x2 internal drive/ backplane connector interfaces for SAS 1.5 Gbps, 3.0 Gbps and 6.0 Gbps. The fixtures do meet the zero-length test load requirement for testing transmitter device compliance point per section 5.9.2 of the SAS-3 specification¹. The N5421A SAS SFF- 8482 compliance test fixture kit offers connectivity from the SFF-8482 primary and secondary transmitter and receiver differential ports to SMA for connection to Keysight Infiniium Series ultra-high-performance oscilloscopes. The N5421A kit also includes the necessary TX and RX transient circuit test loads. Wilder Technologies (www.wilder- tech.com) provides compliance test fixtures for SFF-8482, SAS x2 internal drive/backplane connector interfaces In addition, the Mini-SAS HD test fixtures for SAS-3 plug and receptacle interfaces are available from Wilder Technologies. The SAS-3 compliance test software performs a wide range of tests required to meet the physical layer requirements per section 5.9, Tables 32-51 of the SAS-3 specification. The SAS-3 compliance test software helps you execute the most difficult physical layer tests for transmitters (TX tests only), at the near-end (IT/CT interfaces) of a SAS link, that can be measured with a combination of a 20-GHz or higher real-time oscilloscope and the 81134A or N4903B programmable pulse/pattern generator. The SCSI Trade Association currently sponsors at least one compliance and interoperability plugfests annually for member companies to test their products’ operational capability and margins with other member companies’ products. With the SAS-3 compliance test software, you can use the same oscilloscope you use for everyday debugging to perform automated testing and margin analysis based on the requirements in the SAS-3 specification.
oscilloscopes to testing SAS designs. Figure 1. The Keysight automated test engine guides you quickly through selecting and configuring test results you want to see.
provides flexibility in your test setup. fixtures needed to perform the tests. Figure 2. In configuring the tests, you define the number of UI to test, whether or not
Ordering information
To purchase the SAS-3 software with a new or existing Infiniium Series oscilloscope, order the following options. Data rate Minimum bandwidth Minimum channels
Description
6 Gbps 12 GHz 2 Infiniium 90000 and Z-Series oscilloscopes
12 Gbps 20 GHz 2 Infiniium 90000 and Z-Series oscilloscopes
The SAS-3 compliance software is compatible with Keysight Infiniium Series oscilloscopes with operating software revision 4.30 or higher. For oscilloscopes with earlier revisions, free upgrade software is available at www. keysight.com/find/scope-apps-sw. Application License type Infiniium Z-Series Infiniium
90000 Series
SAS-3 compliance Fixed Factory-installed N5412D-1FP Option 076 User-installed N5412D-1FP N5412D-1NL Floating Transportable N5412D-1TP N5412D-1TP1,2 Server-based N5435A-073 N5435A-073 SAS-2 to SAS-3 compliance upgrade Fixed Factory-installed — — User-installed N5412D-2FP N5412D-2NL Floating Transportable — — Server-based — — SAS-2 compliance Fixed Factory-installed N5412D-3FP Option 043 User-installed N5412D-3FP N5412D-3NL Floating Transportable N5412D-3TP N5412D-3TP1,2 Server-based N5435A-039 N5435A-039 Serial data analysis with clock recovery (included in DSA model) Fixed Factory-installed E2688A-1FP Option 003 User-installed E2688A-1FP E2688A-1NL Floating Transportable E2688A-1TP E2688A-1TP1,2 Server-based N5435A-003 N5435A-003 EZJIT Plus jitter analysis (included in DSA model) Fixed Factory-installed N5400A-1FP Option 004 User-installed N5400A-1FP N5400A-1NL Floating Transportable N5400A-1TP N5400A-1TP1,2 Server-based N5435A-001 N5435A-001 InfiniiSim (optional) Fixed Factory-installed N5465A-1FP Option 014 User-installed N5465A-1FP N5465A-1NL Floating Transportable N5465A-1TP N5465A-1TP1,2 Server-based N5435A-027 N5435A-027 PrecisionProbe (optional) Fixed Factory-installed N2809A-1FP Option 001 User-installed N2809A-1FP N2809A-1NL Floating Transportable N2809A-1TP N2809A-1TP1,2 Server-based N5435A-044 N5435A-044 Matlab3 Fixed Factory-installed — Option 061 User-installed N6174A N6174A 1. Requires software 5.00 and above. 2. Software 4.30 or above requires Windows 7. N2753A Infiniium Windows XP to 7 OS upgrade kit (oscilloscope already has M890 motherboard). N2754A Infiniium Windows XP to 7 OS and M890 motherboard upgrade kit (oscilloscope without M890 motherboard). Verify the M890 mother - board using the procedure found in the Windows 7 upgrade kit data sheet with the publication number 5990-8569EN. 3. Matlab basic software package for running WDP tests - WDP script is not provided; The user is responsible for obtaining the script from the SAS standards. Software options 08 | Keysight | N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet
To complete your test setup, Keysight provides a wide range of cables, adapters, terminations, etc. Please note that the required equipment is listed in the Ordering Information summary. This list is provided for your convenience to accommodate neces - sary mating switches or additional debug capability. Model number Description 11667B Power splitter, DC to 26.5 GHz, 3.5-mm (f) connectors 11636B Power divider, DC to 26.5 GHz, 3.5-mm (f) connectors 1250-1158 SMA (f-f) adapter, DC to 18 GHz 1250-1159 SMA (m-m) adapter, DC to 18 GHz 1250-1694 SMA (m) to SMA (f) adapter 15442A Cable kit, four 90-cm (36-in) SMA (m-m) cables 15443A Matched cable pair, two 90-cm (36-in) SMA (m-m) cables, propagation delay within 25 ps 1810-0118 SMA (m) 50 ohm termination 11742A DC blocking capacitor, 0.045 to 26.5 GHz, 3.5-mm (m-f) connectors N5421A Serial attached SCSI IT/IR test fixtures for SFF-8482 SAS x2 internal plug/receptacle interfaces SAS-TPA Wilder Technologies SAS IT/IR test fixtures for SFF-8482 SAS-3 x2 internal plug/receptacle interfaces (www.wilder-tech.com) MSASHD-TPA Wilder Technologies Mini-SAS HD test fixtures for SAS-3 plug/receptacle interfaces (www.wilder-tech.com) Model number Description Quantity N5421A Keysight IT/CT test fixtures for SFF-8482 SAS-2 x2 internal plug/receptacle interface SAS-TPA Wilder Technologies SAS IT/IR test fixtures for SFF-8482 SAS-3 x2 internal plug/receptacle interfaces (www.wilder-tech.com) MSASHD-TPA Wilder Technologies Mini-SAS HD test fixtures for SAS-3 plug/receptacle interfaces (www.wilder-tech.com) 11742A DC blocking capacitor, 0.045 to 26.5 GHz, 3.5-mm (m-f) connectors 15443A Matched cable pair, two 90-cm (36-in) SMA (m-m) cables, propagation delay within 25 ps (or equivalent) 81134A or N4903B
3.35 Gbps pulse/pattern generator J-BERT
high-performance serial BERT 7 Gb/s or 12.5 Gb/s (with Option 002) 11636B Power divider, DC to 26.5 GHz, 3.5-mm (f) connectors 2 5062-6681 Cable assembly 6-in SMA (m-m) cables or equivalent 4 Other hardware, probes and accessories 09 | Keysight | N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet
3 specification, by the T10/2212-D. Table 1. SAS transmitted signal electrical characterization tests performed by the N5412D software
Related Literature Publication title Publication type Publication number Infiniium 90000 Series Oscilloscopes Data sheet 5989-7819EN Infiniium 90000 X-Series Oscilloscopes Data sheet 5990-5271EN Infiniium 90000 Q-Series Oscilloscopes Data sheet 5990-9712EN Infiniium S-Series Oscilloscopes Data sheet 5991-3904EN Infiniium Z-Series Oscilloscopes Data sheet 5991-3868EN N5400A EZJIT Plus and EZJIT Jitter Analysis Software for Infiniium Series Oscilloscopes Data sheet 5989-0109EN E2688A, N5384A High-Speed Serial Data Analy - sis and Clock Recovery Software for Infiniium Oscilloscopes Data sheet 5989-0108EN N2809A PrecisionProbe for Bandwidths up to
33 GHz
N5465A: InfiniiSim Waveform Transformation Toolset for the Infiniium Series Oscilloscopes Data sheet 5990-4059EN J-BERT N4903B High-Performance Serial BERT Data sheet 5990-3217EN 81133A and 81134A 3.35 GHz Pulse Pattern Generators Data sheet 5988-5549EN Keysight Technologies Oscilloscopes Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications
www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Keysight is a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s commitment to superior product quality and lower total cost of ownership. The only test and measurement company with three-year warranty standard on all instruments, worldwide. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 112 929 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 0800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-07-10-14) 12 | Keysight | N5412D Serial Attached SCSI-3 (SAS-3) Compliance Test Software - Data Sheet This information is subject to change without notice. © Keysight Technologies, 2013 - 2014 Published in USA, August 3, 2014 5991-2254EN www.keysight.com