N5392B

N5392B KEYSIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

N5392B Energy Eficient Ethernet Electrical Performance Validation/ Conformance Software For Ininiium Oscilloscopes EEE Fixture from Wilder P/N: EEE-TPA-ERK ixture Kit Data Sheet

The Keysight Technologies, Inc. N5392B Energy Efficient Ethernet (EEE) electrical performance valida- tion and conformance software for Infiniium oscilloscopes provides you with an easy and accurate way to verify and debug your 1000BASE-T, 100BASE-TX and 10BASE-T Ethernet designs. The Ethernet electrical test software lets you automatically execute Ethernet physical-layer (PHY) electrical tests and displays the results in a flexible report format. In addition to the measurement data, the report provides a margin analysis that shows how closely your device passed or failed each test. To make 1000BASE-T, 100BASETX and 10BASE-T Energy Efficient Ethernet measurements with the N5392B Ethernet electrical test software, you also need the Wilder Fixture Kit (P/N: EEE-TPA-ERK) Energy Efficient Ethernet electrical conformance test fixture. The N5392B Ethernet electrical test software performs a wide range of electrical tests required to meet the Energy Efficient Ethernet electrical specifications for 1000BASE-T, 100BASE-TX and 10BASE-T systems as documented in the IEEE 802.3az- 2010 standard. To meet signal quality requirements, your product must successfully pass conformance testing based on this specification. Performing these tests gives you con- fidence in your design. The N5392B Ethernet electrical test software helps you execute a wide subset of the con- formance tests that can be measured with an oscilloscope. Easy and Accurate Energy Eficient Ethernet Design Validation and Debug

the Standard N5392A Ether- net Compliance Application The N5392B Energy Efficient Ethernet electrical performance application can be integrated into the existing N5392A Ethernet application so that both standard and Energy Efficient Ethernet compliance tests can be run in one single interface. For more information on N5392A Ethernet Electrical Performance Validation and Conformance Software, visit: www.keysight.com/N5392A

Features

The N5392B Energy Efficient Ethernet electrical test software offers several features to simplify the validation of Ethernet designs: – Setup wizard for quick and clear setup, configuration and test – Wide range of 1000BASE-T, 100BASE-TX and 10BASE-T Energy Efficient Ethernet tests enabling standards conformance – Accurate and repeatable results with Keysight Infiniium oscilloscopes – Test various Low-Power Idle (LPI) conditions – Automated reporting in a compre- hensive HTML format with margin analysis N5392B Software Saves You Time With the N5392B electrical test software, you can use the same oscilloscope you use for everyday debugging to perform automated test- ing and margin analysis based on the Energy Efficient Ethernet standards. The N5392B Ethernet electrical test software saves you time by setting the stage for automatic execution of Energy Efficient Ethernet electrical tests. Part of the difficulty of perform- ing electrical tests for Ethernet is properly connecting to the oscillo- scope, loading the proper setup files, and then analyzing the measured results by comparing them to limits published in the specification. The Ethernet electrical test software does much of this work for you. The N5392B Energy Efficient Ethernet electrical test software automatically configures the oscilloscope for each test, and it provides an informative results report that includes margin analysis indicating how close your product is to passing or failing that specification. See Table 2 for a complete list of the measurements made by the Energy Efficient Ethernet electrical test software. Easy test deinition The N5392B Energy Efficient Ethernet electrical test software extends the ease-of-use advantages of Keysight’s Infiniium oscilloscopes to testing Energy Efficient Ethernet designs. The Keysight automated test engine quickly walks you through the steps required to define the tests you want to make, set up the tests, perform the tests, and view the test results. A setup page enables you to quickly make decisions from the outset regarding the choice of tests and per- form functions that affect the testing task. The test selections available in the following steps are then filtered according to the choices made in the setup page. While selecting tests, you can select a category of tests all at once or specify individual tests. You can save tests and configurations as project files and recall them later for quick testing and review of previous test results. Straightforward menus let you perform tests with a minimum amount of mouse clicks.

width model and probes shown.

10 Mb/s,

100 Mb/s

600 MHz

1 GHz

2.5 GHz

4 GHz

6 GHz

8 GHz

12 GHz

13 GHz

16 GHz

20 GHZ

25 GHz

28 GHz

32 GHz

1.5 GHz

3.5 GHz

5 GHz

7 GHz

10 GHz

30 GHz

Table 1. Recommended oscilloscopes and active probes

Table 2. Energy Eficient Ethernet electrical tests performed by the N53 92B software

To use the N5392B Energy Efficient Ethernet electrical performance validation and conformance software on your Infiniium oscilloscope, you will need oscilloscope probes, probe heads, Wilder Technologies Energy Efficient Ethernet electrical conformance test fixture and other test accessories depending on the Ethernet standard and test suites you want to perform. For 10BASE-T and 100BASE-TX Ethernet testing, the test configurations are similar. For 1000BASE-T, the testing requirements include SMA cables. The following section describes the fixtures and tests. Wilder Technologies EEE- TPA-ERK Energy Eficient Ethernet electrical confor- mance test ixture kit The Wilder Technologies EEE- TPA-ERK Energy Efficient Ethernet electrical conformance test fixture kit includes a main test fixture board, two short RJ-45 interconnect cable, and fourteen 50 ohm termination plugs. The main test fixture board is subdivided into four sections that are configured specifically for the require- ments of different tests. Ethernet device connection is accomplished through the short RJ 45 interconnect cable. Some measurements require a direct SMA cable connection to channels on the oscilloscope, however, most commonly the connection is via a Keysight InfiniiMax active differential probe (1130A, 1131A, 1132A, 1134A, 1168A, or 1169A) with an E2678A socketed differential probe head.

Ordering information

The following products are used in the total solution for Energy Efficient Ethernet testing with the N5392B: Model number Description N5392B User-installed license Option 060 Factory-installed license on 9000 and 90000 Series oscilloscopes N5435A Option 060 Server-based license for 9000 and 90000 Series oscilloscopes EEE-TPA-ERK Wilder Technologies Energy Eficient Ethernet conformance test ixtur e kit 113X A or 116X A IniniiMax active differential probe E2678A IniniiMax socketed differential probe head E2677A or N5381A IniniiMax solder-in differential probe head An alternative to purchasing the E2677A and E2678A is the E2669A: E2669A IniniiMax connectivity kit for differential/single-ended measure ments (contains one E2575A differential browser probe head, four E2677A solder-in differential pr obe heads, and two E2678A socketed differential probe heads) Accessories SMA cables 2 maximum needed. Recommend two long (36”) cables. Suggested vendor, part number: Farnell, 8558566 (36” length) SMA push-on connectors Aids productivity by not requiring threaded SMA c onnections. Order 33SMA-Q50-0-4 from S.M Electronics Table 3. Ordering information. Table 4. Related literature.

www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Keysight is a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s commitment to superior product quality and lower total cost of ownership. The only test and measurement company with three-year warranty standard on all instruments, worldwide. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/EEE For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Paciic Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 112 929 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 0800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-07-10-14) 15 | Keysight | N5392B Energy Eficient Ethernet Electrical Performance Validation/Conformance Software For Ininiium Oscilloscopes - Data Sheet This information is subject to change without notice. © Keysight Technologies, 2013 - 2014 Published in USA, August 3, 2014 5991-1901EN www.keysight.com