DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
1 General Description
built in the module provides a “select” function. Figure 1. N50P105-xxxxx-H
2 Key Features
3 Applications
4 B e n e f i t s
Figure 2. Typical Application Diagram
5 Electrical Characteristics
5.1 Mechanical Specifications
5.2 Electrical Specifications
5.3 Environmental Specifications
Bouncing (On/Off) 5 ms Rate: 2 times/sec. Table 3. Environmental Specifications
5.4 Recommended Reflow Temperature Profile
Figure 3. Reflow T emperature Profile
- Do not wash the module! Do not use flux cleaner or solder paste remover!
- Maximum 3 passes through reflow oven.
6 Application Using AS5013 2D Linear Encoder
Figure 4. Application Diagram
7 Package Drawings and Markings
Figure 5. N50P105 Dimensions (mm ±0.15)) Figure 6. Recommended PCB Layout (mm ±0.05) & Circuit Diagram
www.ams.com Revision 1.5 7 - 8 EasyPoint TM N50P105 Datasheet - Revision History
Revision History
Note: Typos may not be explicitly mentioned under revision history. Revision Date Owner Description 1.0 25 May, 2011 abi Initial release 1.1 21 Jun, 2011 Minor changes on text and format 1.2 19 Oct, 2011 rph Added logos to Package Drawings and Markings on page 5 1.3 06 Jan, 2012 Changed logos in Package Drawings and Markings on page 5 1.4 17 Jan, 2012 Added note to Recommended Reflow Temperature Profile on page 3 1.5
19 Jun 2012 Updated Key Features on page 1 and Figure 4
23 Apr 2014 Updated link under Figure 4
www.ams.com Revision 1.5 8 - 8 EasyPoint TM N50P105 Datasheet - Copyrights & Disclaimer Copyrights & Disclaimer Copyright ams AG, Tobelbader Strasse 30, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. Devices sold by ams AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. ams AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein. ams AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with ams AG for current information. This product is intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by ams AG for each application. This product is provided by ams AG “AS IS” and any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services. Contact Information: Headquarters ams AG Tobelbaderstrasse 30
8141 Unterpremstaetten
Austria, Europe Tel: +43 (0) 3136 500 0 Website: www.ams.com