MTP9575J3 CYSTEKEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Single Drive Requirement
  • Low On-resistance
  • Fast switching Characteristic
  • RoHS compliant package Symbol Outline Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Limits Unit Drain-Source V oltage VDS -60 V Gate-Source V oltage VGS ±25 V Continuous Drain Current @VGS=-10V , TC=25°C ID -15 A Continuous Drain Current @VGS=-10V , TC=100°C ID -9.5 A Pulsed Drain Current IDM -45 *1 A W Total Power Dissipation (TC=25℃) Linear Derating Factor Pd 36

0.29 W/°C

Operating Junction and Storage Temperature Tj, Tstg -55~+150 °C Note : *1. Pulse width limited by safe operating area MTP9575J3 TO-252 G：Gate G D S D：Drain S：Source

CYStech Electronics Corp. Spec. No. : C404J3 Issued Date : 2008.09.19 Revised Date :2009.02.04 Page No. : 2/7 MTP9575J3 CYStek Product Specification Thermal Data Parameter Symbol Value Unit Thermal Resistance, Junction-to-case, max Rth,j-c 3.5 °C/W Thermal Resistance, Junction-to-ambient, max Rth,j-a 110 °C/W Characteristics (Tj=25°C, unless otherwise specified) Symbol Min. Typ. Max. Unit Test Conditions Static BVDSS -60 - - V VGS=0, ID=-250μA BVDSS/ΔTj - -0.06 - V/°C Reference to 25°C, ID=-1mA VGS(th) -1.0 - -3.0 V VDS = VGS, ID=-250μA GFS - 14 - S VDS =-10V , ID=-9A IGSS - - ±100 nA VGS=±25V IDSS - - -1 μA VDS =-60V , VGS =0 IDSS - - -25 μA VDS =-48V , VGS =0, Tj=150°C *RDS(ON) - - 90 mΩ VGS =-10V , ID=-12A *RDS(ON) - - 120 mΩ VGS =-4.5V , ID=-9A Dynamic *Qg - 17 27 *Qgs - 5 - *Qgd - 6 - nC ID=-9A, VDS=-48V , VGS=-4.5V *td(ON) - 10 - *tr - 19 - *td(OFF) - 46 - *tf - 53 - ns VDS=-30, ID=-9A, VGS=-10V , RG=3.3Ω, RL=3.3Ω Ciss - 1660 2660 Coss - 160 - Crss - 100 - pF VGS=0V , VDS=-25V , f=1MHz Source-Drain Diode *VSD - - -1.2 V IS=-9A, VGS=0V *trr - 56 - ns *Qrr - 159 - nC IS=-9A, VGS=0, dI/dt=100A/μs *Pulse Test : Pulse Width ≤300μs, Duty Cycle≤2%

Ordering Information

Device Package Shipping Marking MTP9575J3 TO-252 (RoHS compliant) 2500 pcs / Tape & Reel 9575

CYStech Electronics Corp. Spec. No. : C404J3 Issued Date : 2008.09.19 Revised Date :2009.02.04 Page No. : 3/7 MTP9575J3 CYStek Product Specification Characteristic Curves

CYStech Electronics Corp. Spec. No. : C404J3 Issued Date : 2008.09.19 Revised Date :2009.02.04 Page No. : 4/7 MTP9575J3 CYStek Product Specification Characteristic Curves(Cont.)

CYStech Electronics Corp. Spec. No. : C404J3 Issued Date : 2008.09.19 Revised Date :2009.02.04 Page No. : 5/7 MTP9575J3 CYStek Product Specification Reel Dimension Carrier Tape Dimension

CYStech Electronics Corp. Spec. No. : C404J3 Issued Date : 2008.09.19 Revised Date :2009.02.04 Page No. : 6/7 MTP9575J3 CYStek Product Specification Recommended temperature profile for IR reflow Profile feature Sn-Pb eutectic Assembly Pb-free Assembly Average ramp-up rate (Tsmax to Tp) 3°C/second max. 3°C/second max. Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds Time maintained above: −Temperature (TL) − Time (tL) 183°C 60-150 seconds 217°C 60-150 seconds Peak Temperature(TP) 240 +0/-5 °C 260 +0/-5 °C Time within 5°C of actual peak temperature(tp) 10-30 seconds 20-40 seconds Ramp down rate 6°C/second max. 6°C/second max. Time 25 °C to peak temperature 6 minutes max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. Recommended wave soldering condition Soldering Time Product Peak Temperature Pb-free devices 260 +0/-5 °C 5 +1/-1 seconds

CYStech Electronics Corp. Spec. No. : C404J3 Issued Date : 2008.09.19 Revised Date :2009.02.04 Page No. : 7/7 MTP9575J3 CYStek Product Specification TO-252 Dimension *: Typical Inches Millimeters Marking: B A C E H I J K D F GL Style: Pin 1.Gate 2.Drain 3.Source 3-Lead TO-252 Plastic Surface Mount Package CYStek Package Code: J3 9575 □□□□ Device Name Date code Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material:

  • Lead: KFC; tin plating
  • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice:
  • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek.
  • CYStek reserves the right to make changes to its products without notice.
  • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
  • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.