MPI-706H BOSER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Mini. Output Current Max. Output Current (Note 1) Line Regulation Load Regulation Rated Output Current Output Voltage Ripple & Noise p-p (Note 2) Initial Setting Accuracy (Note 3) 0.2A +5V 50mV 5.08V to 5.13V 1.5A +12V 120mV 11.4V to 12.6V +3.3V 50mV 3.10V to 3.50V ---- +5Vsb 120mV 4.80V to 5.20V ---- 0.5A -12V 120mV -11.4V to -12.6V Specifications MPI-706H 80W AC-DC Open Frame Power Supply MPI-706H-A 80W AC-DC Open Frame Power Supply AC-DCIndustrial Power Supply Total Output Power maximum 80W with 8.6CFM forced air-cooling and 60W convection cooling at 50 oC ambient temperature Note: 1) The maximum total combined output power on the +3.3V and +5V rails is 40W 2) Measured by a 20MHz bandwidth limited oscilloscope and the each output is connected with a 10uF Electrolytic Capacitor and a 0.1uF Ceramic Capacitor 3) The +5V output is set between 5.08V to 5.13V by variable resistor and all output at 60% rated load and the other outputs are checked to be within the accuracy range 4) While input voltage below 100V (90-99V), an accessory heat sink or the chassis of application (min. 440 cm , aluminum with 1.5mm thickness) is recommend to be placed at the bottom of the power supply itself Dimensions MPI-706H: 17.0 x 5.2 x 3.9 cm, Tolerance +/-0.4mm MPI-706H-A: 18.0 x 5.2 x 3.9 cm, Tolerance +/-0.4mm 5.22.4 2.1 0.2 17.0 3.9 15.0 C C 3.8 3.4 0.7 0.9 0.9 0.7 #6-32 internal thread stud Total 2mm high , x4(C) CN1L N E CN3 CN5 0.5 1.55 1.45 3.4 2.1 18.0 14.55 3.8 3.4 0.7 0.9 0.9 0.7 #6-32 internal thread stud Total 2mm high , x4(C) 5.2 0.2 3.9 CN LNE CN CN5 0.5 1.55