MPE-8071 BOSER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
www.boser.com.tw Industrial Power SupplyAC-DC MPE-8071 70W AC-DC Open Frame Power Supply Input Range: 85~270VDC *Input Voltage: 85~270VAC *Input Current: 2A at 115VAC or 1A at 230VAC max. *Inrush Current: Does not exceed 30A at 115VAC input or 60A at 230VAC input, at cold start 25oC, and excluding EMI suppression capactiors *Load Range: All outputs are at min. load conditions, while +5V output is between 5~5.1V and all other outputs are within the specified voltage accuracy range *Ripple and Noise: Peak to peak ripple and noise for all outputs is < 1% of output voltage at rated load *Line Regulation: < +/-2% for each output measured at rated load and +/-10% input voltage range *Load Regulation: < +/-3% for +5V, +/-4% for +12V, and +/-5% for -12V with +/-40% change on the measured output load, +/-40% from 60% rated load, while keeping other outputs at 60% rated load *Hold Up Time: > 16ms at 115VAC input and rated load, measured from the end of the last charging pulse to when the main output drops down to 95% output voltage *Efficiency: > 70% at nominal line and rated load *Altitude: 10,000 feet *Protection: Latch-off mode against short circuit or over load conditions AC input ON/OFF cycle to restart power supply *Temperature: 0~+50 oC (operating); -40~+85oC (storage) *Connectors: AC Input: Molex 5277-02A or equivalent device DC Output: Molex 5273-08A or equivalent device For Fan Use Only: Molex 5045-02A or equivalent device *Dimensions: 12.7 x 7.62 x 3.85 cm at tolerance +/-0.4mm FeaturesFeatures *Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950 *EMI: FCC class B / EN55022B TRANSFORMER 12.7 7.62 0.5 6.48 0.5 11.56 TB2 TB3 3.86 MAX.0.25 Output Voltage +5V +12V -12V Min. Load Rated Load 10A 1.5A 0.3A Max. Load 12A 2.5A 0.3A Voltage Accuracy 5~5.1V 11.2~11.6V -10.8~-12V Output +5V GND +12V -12V PIN 1~3 4~6 Safety StandardsSafety Standards