DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

  • M etal composite powder
  • Shielded construction, SMD configuration
  • Inductance range from 0.47 47.00 µH
  • Operating temperature up to +180°C L ow acoustic noise
  • Low magnetic flux leakage
  • AEC–Q200 qualified SMD Inductors Metal Composite Power Inductors MPEV Part Number System MPEV 1 D0630 L 1R5 Series Version Size Code Inductor Inductance Code µH MPEV 1 D0630 6x6x3.0 mm D1040 10x10x4.0 mm The first two digits represent the inductance v alue. The third digit indicates the number of z eros to be added. R = decimal point Examples: 100 10.00 μH R68 0.68 µH 1R5 1.50 µH 101 100.00 µH Overview The KEMET MPEV metal composite inductors are ideal for use in DC to DC switching power supplies for a utomotive applications.The metal composite core has high s aturation c haracteristics m aintaining fu nctionality w ith high current transients and is characterized by t emperature stable inductance.The high heat resistance p ropriety of the inductor has been further improved and a llows for operating temperature up to +180°C.

Applications

Automotive ECU applications such as: LED headlights M eter cluster panels

  • Head-up displays (HUD)
  • Electric water pumps (EWP)
  • Electric oil pumps (EOP)
  • Electric power steering (EPS)

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to +180°C (including self-temperature rise) Rated Inductance Range 0.47 – 47.00 µH at 100 kHz, 1 mA Inductance Tolerance ±20% Rated DC Resistance Range 2.4 – 186.3 mΩ maximum Rated Current Range 2.7 – 26.4 A Table 1 – Ratings & Part Number Reference

1 T = 40 K rise at rated current

2 Inductance drop 20% at rated current

3 Inductance drop 30% at rated current

All electrical characteristics data is referenced to 25°C. Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Typical DC Resistance (mΩ) Maximum Rated Current (A) Self- Resonance Frequency (MHz) Irms1 (Reference) Isat2 (Reference) Isat3 (Reference) Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Typical DC Resistance (mΩ) Maximum Irms1 Isat2 Isat3 Self-Resonance Frequency (MHz)Rated Current (A)

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV DC-Superposed Characteristics MPEV1D0630 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0 5 10 15 20 25 30 35 Inductance [uH] DC Current [A] MPEV1D0630LR47 0.0 0.2 0.4 0.6 0.8 0 5 10 15 20 25 30 Inductance [uH] DC Current [A] MPEV1D0630LR68 0.0 0.3 0.6 0.9 1.2 1.5 0 5 10 15 20 Inductance [uH] DC Current [A] MPEV1D0630L1R0 0.0 0.5 1.0 1.5 2.0 0 5 10 15 20 Inductance [uH] DC Current [A] MPEV1D0630L1R5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 2 4 6 8 10 12 14 16 Inductance [uH] DC Current [A] MPEV1D0630L2R2 0 2 4 6 8 10 12 14 Inductance [uH] DC Current [A] MPEV1D0630L3R3 0 2 4 6 8 10 12 Inductance [uH] DC Current [A] MPEV1D0630L4R7 0 2 4 6 8 10 Inductance [uH] DC Current [A] MPEV1D0630L6R8

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV DC-Superposed Characteristics cont. MPEV1D0630 cont. 0 2 4 6 8 Inductance [uH] DC Current [A] MPEV1D0630L100 0 1 2 3 4 5 6 Inductance [uH] DC Current [A] MPEV1D0630L150 0 1 2 3 4 5 Inductance [uH] DC Current [A] MPEV1D0630L220

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV DC-Superposed Characteristics cont. MPEV1D1040 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0 10 20 30 40 50 Inductance [uH] DC Current [A] MPEV1D1040LR47 0.0 0.2 0.4 0.6 0.8 1.0 0 10 20 30 40 Inductance [uH] DC Current [A] MPEV1D1040LR68 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 25 30 35 Inductance [uH] DC Current [A] MPEV1D1040L1R0 0.0 0.5 1.0 1.5 2.0 0 5 10 15 20 25 30 Inductance [uH] DC Current [A] MPEV1D1040L1R5 0.0 0.5 1.0 1.5 2.0 2.5 0 5 10 15 20 25 Inductance [uH] DC Current [A] MPEV1D1040L2R2 0 5 10 15 20 Inductance [uH] DC Current [A] MPEV1D1040L3R3 0 5 10 15 20 Inductance [uH] DC Current [A] MPEV1D1040L4R7 0 3 6 9 12 15 Inductance [uH] DC Current [A] MPEV1D1040L6R8

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV DC-Superposed Characteristics cont. MPEV1D1040 cont. 0 3 6 9 12 15 Inductance [uH] DC Current [A] MPEV1D1040L100 0 2 4 6 8 10 12 Inductance [uH] DC Current [A] MPEV1D1040L150 0 2 4 6 8 10 Inductance [uH] DC Current [A] MPEV1D1040L220 0 2 4 6 8 10 Inductance [uH] DC Current [A] MPEV1D1040L330 0 1 2 3 4 5 6 Inductance [uH] DC Current [A] MPEV1D1040L470

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV Dimensions Case Size Dimensions (mm) Land Pattern (mm) MPEV1D0630 7.0 ± 0.25 3.0 Maximum 6.5 ± 0.2 3.2 ± 0.3 (1.3) (1.3) 8.255 3.429 3.429 MPEV1D1040 For values up to 1.5 μH or below 10.0 ± 0.2 4.7 ± 0.3 4.953 5.842 12.192 MPEV1D1040 For values from 2.2 μH or above 10.0 ± 0.2 3.0 ± 0.3 5.817 3.251 12.065

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV Construction Metal TerminalCopper Coil Metal Composite Taping Specification Dimensions of Indented Square Hole Plastic Tape Reel Dimensions F W P0 P2 øD0T C D Enlarged Enlarged B A D C Case Size Reel Quantity Dimensions (mm) W F E1 P1 P2 P0 øD0 T

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV Reel Specifications Dimensions of Indented Square Hole Plastic Tape Reel Dimensions F W P0 P2 øD0T C D Enlarged Enlarged B A D C Case Size Dimensions (mm) A B C D A 0 W1 W2 Soldering Process Recommended Reflow Soldering Profile Reference ICP/JEDEC J-STD-020E Profile Feature Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 150°C Temperature Maximum (TSmax) 200°C Time (ts) from Tsmin to Tsmax 60 – 120 seconds Ramp-Up Rate (TL to TP) 3°C/second maximum Liquidous Temperature (TL) 217°C Time Above Liquidous (tL) 60 – 150 seconds Peak Temperature (TP) 250°C for MPEV1D0630 245°C for MPEV1D1040 Time within 5°C of Maximum Peak Temperature (tP) 30 seconds maximum Ramp-Down Rat e ( TP to TL) 6°C/second m aximum Time 25°C to Peak Temperature 8 minutes maximum Time Temperature Tsmin Tsmax TL TP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tP tL ts 25°C to Peak

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other e nvironments, exposure to high temperatures, high humidity, corrosive atmospheres, and long-term storage degrades s olderability. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% r elative humidity. Atmospheres should be free of chlorine-bearing and sulfur-bearing compounds. Temperature fluctuations s hould be minimized to avoid condensation on the parts. For optimized solderability, inductor stock should be used promptly, preferably within six months of receipt.

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9016_MPEV • 8/31/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SMD Inductors Metal Composite Power Inductors MPEV KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation.