GLD AMPHENOLPCD | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Magnetic, low-profile, self-aligning connector designed for soldier worn applications. Amphenol PCD NEW Pogo Contacts Sealing Grommet Magnetic Alignment Target Contacts Contact cable_sales@amphenolpcd.com
APCD’s newest, small, lightweight, ultra flat connector designed for solider worn applications, including data sharing, battery charging, and peripheral connectivity. Plugs and receptacles fit through MOLLE pack straps. Receptacles are designed for panel mounting, clipped into MOLLE, or sewn into place.
- Magnetic mating orients and aligns connectors for fast, no-look mating.
- Factory adjustable engage/disengage forces to meet customer specific requirements
- Spring pins (spring probes) maintain contact through shock and vibration.
- Fluorosilicone gasket interfacial seal that seals individual contacts and the plug to receptacle.
- May be supplied cabled (flat or round) or self-terminated.
- Power and Ground Pogo pins designed for 5A continuous current
- Supports USB2.0 Data, with 90 Ω impedance
- First mate, last break, pogo contact available for ground contacts
- *Coming Soon: Multi Angle Release Gladiator with E-textile termination capability Material 6061-T6 Aluminum Current Rating 5A continuous Dielectric Withstanding Voltage 120VDC Insulation Resistance 5000MΩ at 500VDC Operating Temperature -50 Co to + 100 Co Shell to Shell Resistance < 4 mΩ Mating Durability 5000+ Mating Cycles De-Mate Force 3.0 to 5.0 lbs Mechanical Vibration MIL-STD-883 Method 2007.3 ; Test Condition A Sealing IP68 2m for 2hrs Salt Spray 96 hrs CBRN Allows for NBC decontamination SpecificationsPin Assignment Pin Specifications Wire AWG 1 40 V @ 5amps 22 AWG 2 40 V @ 5amps 22 AWG 3 USB2.0 Data + 28 AWG 4 USB2.0 Data - 28 AWG 5 40 V @ 5amps 22 AWG 6 40 V @ 5amps 22 AWG * Subject to change pending completion of validation test Contact cable_sales@amphenolpcd.com
*Contact cable_sales@amphenolpcd.com for custom solutions SERIES GLD: Standard Gladiator Connector Kit MCG: Cable Assembly/Pig tail CONNECTOR TYPE P: Inline Plug R: Inline Receptacle D: Double-ended Plug & Receptacle NO. OF POSITIONS 06: 6 positions 12 : 12 positions (Mate style S only) MATE STYLE M: Reversible 180° mate option S: Single Mate Direction Keyed Forward W: Single Mate Direction Keyed Reverse MATE OPTION 1: Magnet 2: Steel plate (Receptacle only) SIGNAL TYPE D: USB 3 Compatible M: USB 2.0 Compatible TERMINATION FINISH 1: RoHS 2: Leaded solder SHELL FINISH B: Black Nickel R: Ruthenium CUSTOM COLORIZATION/TEXTURE 00: Standard CABLE LENGTH 018: 18 inches (1.5 feet) 024: 24 inches (2 feet) 036: 36 inches (3 feet) Leave blank if connector only GLD X XX X X X X X XX - XXX GLADIATOR Contact cable_sales@amphenolpcd.com