MA21

MA20 LUMINIS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

TYPE: QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH OPTION OPTION OPTION OPTION LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice.

260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5

MayaLED is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. COB LED is assembled on a thick pad housing chamber designed with a heat sink pattern to optimize heat dissipation and luminaire efficacy. The power supply is enclosed in an isolated chamber allowing a quick access for electrical maintenance without disturbing the optical light chamber. COB LED is removable and replaceable for ease of maintenance or lighting upgrade. ELECTRICAL LED POWER SUPPLY Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), operating temperature range of -30ºC/-22ºF to 60ºC/140ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery. LED Type II, III, IV or V light distribution via high performance optical lenses. Standard 4000K/80CRI. Optional 2700K, 3000K, 3500K and 5000K. LIFE 125,000hrs (L70B50) based on LM-80 report for lumen maintenance. FINISH Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. MOUNTING Maximum weight: 26lbs (12kg) MayaLED is designed for ease of access and installation. Designed for wall or pole mount to fit with a 4” (102) or 5” (127) pole. 6” (152) available on request. Alternate poles or wall attachments are available to meet multiple installation conditions. (Refer to page 3) CERTIFICATION Tested to UL1598 and CSA22.2 #250. ETL listed for wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC/77ºF. Lumen depreciation in accordance with IESNA LM80 standards. CE Certification on request. Rated IP66. 1- Cast aluminum LED heat sink. 2- Optical system assembly. 3- Set of two cast aluminum supporting struts. 4- Removable cast aluminum cover for easy access to electrical components and driver. 5- LED driver housing. 6- Lower cast aluminum housing to fit with available on request. 7- 30” Diameter hard aluminum shade (MA21 only). MA20/MA21 SERIES MAYA - LED Post Top MA20 MA21 August 2017 MA21 Luminaire with shade. EPA: 1.10 27.3” (693) MA20 Luminaire less shade. EPA: 0.93 30” (762) 17” (432)

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. MSD Motion sensor device (Hi/Low to 25%)3 MOUNTING AC8 Pole mount attachment with 45º support 2AC8 Double pole mount attachment with 45º support at 180º ACW Wall mount attachment with 45º support EC8P Pole mount attachment with stacked arm 2EC8P Double pole mount attachment with stacked arms at 180º EC8PS Pole mount attachment with short stacked arm (MA20 only) 2EC8PS Double pole mount attachment with short stacked arms at 180º (MA20 only) EC8W Wall mount attachment with stacked arm EC8WS Wall mount attachment with short stacked arm (MA20 only) TN3 3” Tenon pole adaptor5 PR8 Pedestal mount adaptor BLC Back light control4 ACCESSORIES MA20/MA21 SERIES MAYA - LED August 2017 NOTES 1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.) 3- MSD: The sensor is integral to the luminaire. One sensor is required for up to 250º coverage and two sensors are required for 360º coverage. 4- BLC: Back Light Control - Type II Distribution. 5- 3” tenon pole adaptor only required for 3” O.D. poles by others. STANDARD COLORS WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne SGT Steel Gray OPTIONAL COLORS CS Custom color RAL RAL# color (Refer to color chart) LUMINAIRE SELECTION 120V 277V Optional 347V 480V MODEL# LED LIGHT SELECTION (4000K/80CRI) VOLTAGE 1 FINISH MA20 OPTIONS NOTE: Above wattage values are based on 277V, tested at 25 ºC/ 77ºF ambient temperature. Wattage may vary by approx. +/- 10% for other voltages, or due to changes in ambient temperature. Lumen output will remain constant. Type III Type IV Type V Type II MA21 INPUT DELIVERED WATTS LUMENS MODEL 34W 4170 MA20-L1W30r1-R2 MA21-L1W30r1-R2 69W 7994 MA20-L2W30r1-R2 MA21-L2W30r1-R2 112W 11029 MA20-L3W30r1-R2 MA21-L3W30r1-R2 138W 13284 MA20-L3W46r0-R2 MA21-L3W46r0-R2 38W 4395 MA20-L1W30r1-R3 MA21-L1W30r1-R3 76W 8697 MA20-L2W30r1-R3 MA21-L2W30r1-R3 111W 11177 MA20-L3W30r1-R3 MA21-L3W30r1-R3 135W 12697 MA20-L3W46r0-R3 MA21-L3W46r0-R3 38W 4493 MA20-L1W30r1-R4 MA21-L1W30r1-R4 75W 8482 MA20-L2W30r1-R4 MA21-L2W30r1-R4 111W 11105 MA20-L3W30r1-R4 MA21-L3W30r1-R4 135W 12378 MA20-L3W46r0-R4 MA21-L3W46r0-R4 36W 4243 MA20-L1W30r1-R5 MA21-L1W30r1-R5 69W 7937 MA20-L2W30r1-R5 MA21-L2W30r1-R5 113W 11274 MA20-L3W30r1-R5 MA21-L3W30r1-R5 139W 12639 MA20-L3W46r0-R5 MA21-L3W46r0-R5 Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 2700K CCT 80 CRI (LCF: 0.91) K3 3000K CCT 80 CRI (LCF: 0.94) K35 3500K CCT 80 CRI (LCF: 0.983) K5 5000K CCT 80 CRI (LCF: 1.01) NOTE: Other CCT & higher CRI available, please consult factory. LIGHT AMBER LED LIGHT SELECTION INPUT DELIVERED WATTS LUMENS MODEL 17W 388 MA20-L1W18K2A MA21-L1W18K2A 34W 776 MA20-L2W18K2A MA21-L2W18K2A 51W 1164 MA20-L3W18K2A MA21-L3W18K2A

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. 1” X 3” (25X76) extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5” dia. poles. 1/2” dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) EC8P (Applicable for MA20 and MA21) Set of (2) 1” X 3” (25X76) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.97) EC8PS (Applicable for MA20 only) Set of (2) 1” X 3” (25X76) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.72) PAA Pole series PSB Pole series PST Pole series 28” (711) 34” (864)30” (762) 17.75” (451) 18” (457) 12” (304) 11” (279) 12” (304) Power feed Power feedPower feed NOTE: PST Pole with AC8 or 2AC8 attachment requires a 30” (762) tenon extension over pole nominal height. EC8P, 2EC8P, EC8PS and 2EC8PS require an 18” tenon extension. Factory installed. Ø 4” Ø 5” Ø 4” Tapered Ø 4” Height Pole PAA416 PAA516 PST16 PTA16 PSB16 16 Ft. (4,8 M) For additional pole details, please refer to separate pole specification sheet. Ø 4”= 102mm Ø5”= 127mm MATCHING POLE SELECTION 40” (1016) 40” (1016) PTA Pole series 2AC8 Double pole mount attachment with 45º support at 180º 2EC8P (Applicable for MA20 and MA21) Double pole mount attachment with stacked arms at 180º 2EC8PS (Applicable for MA20 only) Double pole mount attachment with short stacked arms at 180º

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. 1” X 3” (25X76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia. X 45º standard natural stainless steel rod support. EC8W (Applicable for MA20 and MA21) Set of (2) 1” X 3” (25X76) extruded aluminum wall mount arms with cast aluminum wall plate. EC8WS (Applicable for MA20 only) Set of (2) 1” X 3” (25X76) extruded aluminum wall mount arms with cast aluminum wall plate. 28” (711) Power feed 34” (864) 18” (457) 11” (279) Power feed Power feed Mounting Mounting Mounting 4 . 6 2 5 ” (118) (76) 1 7 . 7 5 ” (451) Power feed (76) 4 . 6 2 5 ” (118) Power feed 6 . 1 2 5 ” (156) (76) 4 . 6 2 5 ” (118) Power feed 6 . 1 2 5 ” (156) 40” (1016) 40” (1016)

LUMINIS.COM Luminaires may be altered for design improvement or discontinued without prior notice. TYPICAL PHOTOMETRY SUMMARY All published photometric data are executed and certified by an independent testing laboratory. TYPE II MA20-L1W30r1-R2 MA21-L1W30r1-R2 Total Lumens: 4170 Lms Total Input Watts: 34.33W Efficacy: 121.47 Lms/W BUG Rating: B2-U0-G2 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 2312 @ 85ºH/67.5ºV MA20-L2W30r1-R2 MA21-L2W30r1-R2 Total Lumens: 7994 Lms Total Input Watts: 68.66W Efficacy: 116.43 Lms/W BUG Rating: B3-U0-G3 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 5935 @ 77.5ºH/67.5ºV MA20-L3W30r1-R2 MA21-L3W30r1-R2 Total Lumens: 11029 Lms Total Input Watts: 111.74W Efficacy: 98.7 Lms/W BUG Rating: B3-U0-G3 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 8023 @ 72.5ºH/67.5ºV MA20-L3W46r0-R2 MA21-L3W46r0-R2 Total Lumens: 13284 Lms Total Input Watts: 138.42W Efficacy: 95.97 Lms/W BUG Rating: B3-U0-G3 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 9964 @ 70ºH/67.5ºV TYPE III MA20-L1W30r1-R3 MA21-L1W30r1-R3 Total Lumens: 4395 Lms Total Input Watts: 38.3W Efficacy: 114.75 Lms/W BUG Rating: B2-U0-G2 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 2718 @ 65ºH/70ºV MA20-L2W30r1-R3 MA21-L2W30r1-R3 Total Lumens: 8697 Lms Total Input Watts: 75.59W Efficacy: 115.05 Lms/W BUG Rating: B3-U0-G3 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 4515 @ 90ºH/60ºV MA20-L3W30r1-R3 MA21-L3W30r1-R3 Total Lumens: 11177 Lms Total Input Watts: 110.83W Efficacy: 100.85 Lms/W BUG Rating: B3-U0-G3 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 6515 @ 60ºH/67.5ºV MA20-L3W46r0-R3 MA21-L3W46r0-R3 Total Lumens: 12697 Lms Total Input Watts: 135.09W Efficacy: 93.99 Lms/W BUG Rating: B3-U0-G3 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 7364 @ 60ºH/67.5ºV TYPE IV MA20-L1W30r1-R4 MA21-L1W30r1-R4 Total Lumens: 4493 Lms Total Input Watts: 38.25W Efficacy: 117.46 Lms/W BUG Rating: B2-U1-G1 Cutoff Class:Full Cutoff CCT/CRI: 4000K/80 Max Candela: 2740 @ 65ºH/70ºV MA20-L2W30r1-R4 MA21-L2W30r1-R4 Total Lumens: 8482 Lms Total Input Watts: 75.21W Efficacy: 112.78 Lms/W BUG Rating: B2-U1-G2 Cutoff Class:Full Cutoff CCT/CRI: 4000K/80 Max Candela: 4829 @ 57.5ºH/67.5ºV MA20-L3W30r1-R4 MA21-L3W30r1-R4 Total Lumens: 11105 Lms Total Input Watts: 111.47W Efficacy: 99.62 Lms/W BUG Rating: B3-U1-G3 Cutoff Class:Full Cutoff CCT/CRI: 4000K/80 Max Candela: 6632 @ 67.5ºH/70ºV MA20-L3W46r0-R4 MA21-L3W46r0-R4 Total Lumens: 12378Lms Total Input Watts: 135.24W Efficacy: 91.53 Lms/W BUG Rating: B3-U1-G3 Cutoff Class:Full Cutoff CCT/CRI: 4000K/80 Max Candela: 7186 @ 67.5ºH/67.5ºV TYPE V MA20-L1W30r1-R5 MA21-L1W30r1-R5 Total Lumens: 4243 Lms Total Input Watts: 35.71W Efficacy: 118.82 Lms/W BUG Rating: B3-U0-G1 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 1684 @ 67.5ºV MA20-L2W30r1-R5 MA21-L2W30r1-R5 Total Lumens: 7937 Lms Total Input Watts: 68.67W Efficacy: 115.58 Lms/W BUG Rating: B3-U0-G2 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 3221 @ 65ºV MA20-L3W30r1-R5 MA21-L3W30r1-R5 Total Lumens: 11274 Lms Total Input Watts: 113.27W Efficacy: 99.53 Lms/W BUG Rating: B4-U0-G2 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 4835 @ 62.5ºV MA20-L3W46r0-R5 MA21-L3W46r0-R5 Total Lumens: 12639Lms Total Input Watts: 138.6W Efficacy: 91.19 Lms/W BUG Rating: B4-U0-G2 Cutoff Class: Full Cutoff CCT/CRI: 4000K/80 Max Candela: 5571 @ 67.5ºV